Generated by All in One SEO v4.9.8, this is an llms.txt file, used by LLMs to index the site.

# RBF Morph

## Sitemaps

- [XML Sitemap](https://www.rbf-morph.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Posts

- [Blog](https://www.rbf-morph.com/blog/)
- [Integrating RBF Morph and LS-DYNA into Ansys Workbench and Mechanical for car bonnet crash optimisation](https://www.rbf-morph.com/integrating-rbf-morph-and-ls-dyna-into-ansys-workbench-and-mechanical-for-car-bonnet-crash-optimisation/) - Integrating RBF Morph and LS-DYNA into Ansys Workbench and Mechanical for car bonnet crash optimisation Authors: M. E. Biancolini, L. Geronzi Fast and cost efficient CFD optimization by means of adjoint and RBF mesh morphing: a perspective from Dallara Authors: E. Serioli, C. Groth, S. Invernizzi, M. E. Biancolini Use the link below to download:
- [PANDORA Completed: Transforming Vascular Surgery Through HPC, AI and Digital Twins](https://www.rbf-morph.com/pandora-completed-transforming-vascular-surgery-through-hpc-ai-and-digital-twins/) - After months of innovation, collaboration, and large-scale computation, the European PANDORA project has officially reached its conclusion and the results demonstrate the transformative power of combining High-Performance Computing (HPC), Artificial Intelligence, Digital Twins, and advanced simulation. PANDORA addressed a critical challenge in vascular surgery: the need for patient-specific pre-operative planning for aortic graft procedures. Today, nearly 20% of these
- [Ansys Transportation Summit 2025](https://www.rbf-morph.com/ansys-transportation-summit-2025/) - Use the link below to download the presentation: Presentation: “Interactive Real-Time Design Exploration in VR Using RBF Morph and Twin Builder”
- [RBF Morph at the Ansys Transportation Summit 2025](https://www.rbf-morph.com/rbf-morph-at-the-ansys-transportation-summit-2025/) - Our founder, Marco Evangelos Biancolini, was a featured speaker at the Ansys Transportation Summit 2025. This event brought together industry leaders, researchers, and innovators to discuss the technologies shaping the future of mobility. Biancolini, Associate Professor of Machine Design at the University of Rome Tor Vergata, has dedicated his career to advancing simulation-driven engineering. His
- [Symposium on Modelling and Engineering Simulation 2026](https://www.rbf-morph.com/symposium-on-modelling-and-engineering-simulation-2026/) - Use the link below to download the presentation: Presentation: “Geometry Intelligence and Fast RBF for Real-Time CAE Optimization”
- [RBF Morph at the Symposium on Modelling and Engineering Simulation 2026](https://www.rbf-morph.com/rbf-morph-at-the-symposium-on-modelling-and-engineering-simulation-2026/) - RBF Morph participated in the Symposium on Modelling and Engineering Simulation 2026, which took place at SUPSI – Campus EST in Lugano, Switzerland, on 10 February 2026. Our founder, Prof. Marco Evangelos Biancolini, delivered a keynote presentation entitled Geometry Intelligence and Fast RBF for Real-Time CAE Optimization. The talk focused on advanced methodologies for geometry
- [Interactive Aerodynamic Design Based on Physics-Informed Models and Immersive Visualization](https://www.rbf-morph.com/interactive-aerodynamic-design-based-on-physics-informed-models-and-immersive-visualization/) - Author: M. A. Helciug University of Rome Tor Vergata I 2026 I Italian Use the links to download the presentation and the thesis.
- [Towards Real-Time Aerodynamic Optimization Through Physics-Informed Digital Twins](https://www.rbf-morph.com/towards-real-time-aerodynamic-optimization-through-physics-informed-digital-twins/) - We are pleased to announce the successful defense of the Master's thesis “Interactive Aerodynamic Design Based on Physics-Informed Models and Immersive Visualization” by Mihai Alin Helciug at the University of Rome Tor Vergata, under the supervision of Prof. Marco E. Biancolini and co-supervision of Ing. Emanuele Di Meo. The research focused on the development of
- [Shaping the Future of Sailing Technology Through Simulation-Driven Engineering](https://www.rbf-morph.com/shaping-the-future-of-sailing-technology-through-simulation-driven-engineering/) - For more than a decade, Prof. Marco Evangelos Biancolini from University of Rome Tor Vergata and Prof. Ignazio Maria Viola from University of Edinburgh have shared a common scientific vision: advancing nautical engineering through high-fidelity numerical simulation and translating cutting-edge research into practical tools for the marine industry. Leading, respectively, the rbfLAB and Voilab research
- [Finite Element-Based Thermo-Structural Optimization of an Internal Combustion Engine Intake Manifold](https://www.rbf-morph.com/finite-element-based-thermo-structural-optimization-of-an-internal-combustion-engine-intake-manifold/) - Author: G. Bortolotto University of Rome Tor Vergata I 2026 I Italian/English Use the links to download the presentation and the thesis.
- [Leveraging RBF Morph for Thermo-Structural Optimization of Automotive Components](https://www.rbf-morph.com/leveraging-rbf-morph-for-thermo-structural-optimization-of-automotive-components/) - RBF Morph is pleased to congratulate Gabriele Bortolotto on earning his Engineering degree from the University of Rome Tor Vergata following the successful defense of his thesis, “Finite Element-Based Thermo-Structural Optimization of an Internal Combustion Engine Intake Manifold.” Conducted under the supervision of Prof. Marco Evangelos Biancolini, with co-supervisors Ing. Riccardo Serenella and Prof. Lorenzo
- [Accurate Mapping Strategies for Fluid-Structure Interaction Across Multi-Fidelity Models for Aircraft Winglet Optimization](https://www.rbf-morph.com/accurate-mapping-strategies-for-fluid-structure-interaction-across-multi-fidelity-models-for-aircraft-winglet-optimization/) - Published in the new Springer volume Digital Twins for Aerospace, edited by Marco Biancolini, Corrado Groth, and Ubaldo Cella, this contribution presents a workflow for aero-structural shape optimization based on high-fidelity Fluid-Structure Interaction (FSI) analysis. The study focuses on the optimization of aircraft winglets by integrating aerodynamic simulations with structural flexibility effects. A dedicated FSI
- [Smarter wheels: How multi-physics optimization is shaping the future of automotive design](https://www.rbf-morph.com/smarter-wheels-how-multi-physics-optimization-is-shaping-the-future-of-automotive-design/) - Published in Futurities, July 2025 issue Download the PDF
- [RBF Morph and Kingston University: Advancing Morphing Wing Technology for More Sustainable Aviation](https://www.rbf-morph.com/rbf-morph-and-kingston-university-advancing-morphing-wing-technology-for-more-sustainable-aviation/) - RBF Morph is proud to support innovative research exploring the next generation of aircraft design through morphing wing technology. In collaboration with Kingston University and PhD researcher Muram Abbadi, this project investigates how flexible wing structures can adapt their shape across different flight conditions to optimise aerodynamic performance. The concept draws inspiration from the wing-warping
- [EMMS 2026](https://www.rbf-morph.com/emms-2026-2/) - Use the link below to download the presentation: Presentation: “Modeling Pedaling Kinematics for Cycling Aerodynamic Analyses”
- [EMMS 2026](https://www.rbf-morph.com/emms-2026/) - Use the link below to download the presentation: Presentation: “Surgeon-in-the-Loop”
- [New Postgraduate Master’s Program in Additive Manufacturing for the Medical Sector (Rome)](https://www.rbf-morph.com/new-postgraduate-masters-program-in-additive-manufacturing-for-the-medical-sector-rome/) - RBF Morph is pleased to highlight the launch of the 2nd Level University Master’s Degree in Additive Manufacturing for the Medical Sector: Innovation, Technology and Advanced Training, jointly awarded by the University of Rome Tor Vergata and Sapienza University of Rome. The program is delivered within the framework of the Scuola IaD at the University
- [Advanced Reconstruction and As-Built Modeling for Metrology, CAD, and CAE Integration](https://www.rbf-morph.com/advanced-reconstruction-and-as-built-modeling-for-metrology-cad-and-cae-integration/) - We are pleased to share our founder’s presentation, “Advanced Reconstruction: Creating the As-Built Model,” originally delivered during the December online session of the Metrology & Reverse Engineering Technology Development Programme and now available for download. This release coincides with our participation in the on-site workshop for Fusion Innovation in Barcelona, where the discussion around high-fidelity
- [Metrology & Reverse Engineering Technology Development Programme Workshop for Fusion Innovation](https://www.rbf-morph.com/metrology-reverse-engineering-technology-development-programme-workshop-for-fusion-innovation/) - Use the link below to download the presentation: Presentation: “Advanced Reconstruction: Creating the As-Built Model”
- [ANSYS White paper "Scaling New Heights in Aerodynamics Optimization: The 50:50:50 Method"](https://www.rbf-morph.com/113-ansys-wp-50-50-50/) - Have a look to the ANSYS blog post of Sandeep Sovani Innovative New Method for Vehicle Aerodynamic Simulations describing the the recently-released white paper: Scaling New Heights in Aerodynamics Optimization: The 50:50:50 Method, co-authored with Ashok Khondge. The topics are the Current Role of CFD in Aerodynamic Design, the 50:50:50 Method, Meshing and Defining Computational Domain, Defining Shape Parameters,
- [Crack Propagation Analysis of ITER Vacuum Vessel Port Stub with Radial Basis Functions Mesh Morphing](https://www.rbf-morph.com/crack-propagation-analysis-of-iter-vacuum-vessel-port-stub-with-radial-basis-functions-mesh-morphing-2/) - See the link Published in Fusion Engineering and Design, Volume 157, August 2020
- [Fast High Fidelity CFD/CSM Fluid Structure Interaction Using RBF Mesh Morphing and Modal Superposition Method](https://www.rbf-morph.com/fast-high-fidelity-cfd-csm-fluid-structure-interaction-using-rbf-mesh-morphing-and-modal-superposition-method/) - See the link Published in the the Emerald Insight of Aircraft Engineering and Aerospace Technology, vol. 91 no. 6
- [Flexible Engineering Toward Green Aircraft: CAE Tools for Sustainable Mobility](https://www.rbf-morph.com/flexible-engineering-toward-green-aircraft-cae-tools-for-sustainable-mobility-2/) - See the link Published with the title “Lecture Notes in Applied Mechanics”, Volume 7 Springer, 2020
- [Optimization of the Formula SAE Car Airbox](https://www.rbf-morph.com/fluid-dynamics-of-exhaust-manifolds-for-internal-combustion-engines-3/) - Theses and dissertations 2010 - Author: G.Sforza
- [Fluid Dynamics of Exhaust Manifolds for Internal Combustion Engines](https://www.rbf-morph.com/fluid-dynamics-of-exhaust-manifolds-for-internal-combustion-engines-2/) - Theses and dissertations 2011 - Author: W.Savastano
- [Optimization of Sail Settings Using RBF Mesh Morphing](https://www.rbf-morph.com/optimization-of-sail-settings-using-rbf-mesh-morphing-2/) - Theses and dissertations 2014 - Author: S. Ramirez
- [Aerodynamics Optimization of a Motorglider Using Mesh Morphing](https://www.rbf-morph.com/aerodynamics-optimization-of-a-motorglider-by-using-of-mesh-morphing-2/) - Theses and dissertations 2014 - Author: D.Sorani
- [Goal-Driven Multi-Objective Shape Optimization for Conjugate Heat Transfer in an Effusion Cooling System of a Combustion Chamber, through a CFD/Mesh Morphing-Based Approach](https://www.rbf-morph.com/goal-driven-multi-objective-shape-optimization-for-conjugate-heat-transfer-in-an-effusion-cooling-system-of-a-combustion-chamber-through-a-cfd-mesh-morphing-based-approach-2/) - Theses and dissertations 2014 - Author: W. Savastano
- [Structural Analysis of the Hub of a Rental Kart and Optimization through Mesh Morphing](https://www.rbf-morph.com/structural-analysis-of-the-hub-of-a-rental-kart-and-optimization-through-mesh-morphing-2/) - Theses and dissertations 2017 - Author: L.Mazzaferro
- [An Investigation on Digital Twin Methodologies for the ITER Project](https://www.rbf-morph.com/an-investigation-on-digital-twin-methodologies-for-the-iter-project-2/) - Theses and dissertations 2018 - Author: E.Pompa
- [Evaluation of ‘As Built’ Performance of Mechanical Components Using Mesh Morphing Techniques](https://www.rbf-morph.com/evaluation-of-as-built-performance-of-mechanical-components-using-mesh-morphing-techniques-2/) - Theses and dissertations 2019 - Author: F. Scarpitta
- [Analysis of Vortex Induced Vibration of a Thermowell by High Fidelity FSI Numerical Analysis Based on RBF Structural Modes Embedding A](https://www.rbf-morph.com/analysis-of-vortex-induced-vibration-of-a-thermowell-by-high-fidelity-fsi-numerical-analysis-based-on-rbf-structural-modes-embedding-a/) - Theses and dissertations 2019 - Author: A.Felici
- [Optimization Methods for External and Internal Flows Using CFD Adjoint and Mesh Morphing](https://www.rbf-morph.com/optimization-methods-for-external-and-internal-flows-using-cfd-adjoint-and-mesh-morphing/) - Theses and dissertations 2019 - Author: A.Lopez
- [Optimization of the Shape of a Helical Spring Using the Biological Growth Method](https://www.rbf-morph.com/optimization-of-the-shape-of-a-helical-spring-using-the-biological-growth-method-2/) - Theses and dissertations 2019 - Author: E. Lombardi
- [Frontal Impact Performance Optimization of an Automotive Hood through Explicit Finite Element Simulations and Mesh Morphing](https://www.rbf-morph.com/frontal-impact-performance-optimization-of-an-automotive-hood-through-explicit-finite-element-simulations-and-mesh-morphing-2/) - Theses and dissertations 2021 - Author: M. Volponi
- [Aerodynamic Optimization of a Cycling Helmet for Time-Trial](https://www.rbf-morph.com/aerodynamic-optimization-of-a-cycling-helmet-for-time-trial-2/) - Theses and dissertations 2023 - Author: A.Sgambellone
- [Advanced Simulation of an Operating Room: from the Virtual Model to the Digital Twin](https://www.rbf-morph.com/advanced-simulation-of-an-operating-room-from-the-virtual-model-to-the-digital-twin-2/) - Theses and dissertations 2022 - Author: G.Gargiulo
- [Aeroelastic High-Fidelity Calculation through HPC](https://www.rbf-morph.com/aeroelastic-high-fidelity-calculation-through-hpc/) - Theses and dissertations 2022 - Author: D. Regine
- [Aerodynamic Optimization of a Formula SAE Car Using CFD and Mesh Morphing](https://www.rbf-morph.com/aerodynamic-optimization-of-a-formula-sae-car-using-cfd-and-mesh-morphing-2/) - Theses and dissertations 2022 - Author: G.Marica
- [Aeroelastic Analysis of a Competition Car](https://www.rbf-morph.com/aeroelastic-analysis-of-a-competition-car/) - Theses and dissertations 2022 - Author: L. Carnevale
- [Structural Optimization of an Automotive Wheel Rim](https://www.rbf-morph.com/structural-optimization-of-an-automotive-wheel-rim-2/) - Theses and dissertations 2022 - Author: L. Cerniglia
- [Cylinder Head Optimization with RBF Mesh Morphing and the Biological Growth Method](https://www.rbf-morph.com/cylinder-head-optimisation-with-rbf-mesh-morphing-and-biological-growth-method/) - Theses and dissertations 2022 - Author: M.Marra
- [Aerodynamic Optimization of a MotoGP Motorcycle using CFD and Mesh Morphing](https://www.rbf-morph.com/aerodynamic-optimization-of-a-motogp-motorcycle-using-cfd-and-mesh-morphing-2/) - Theses and dissertations 2023 - Author: F. Ricci
- [Aerodynamic Optimization of a Rear Camera through CFD Analysis and Mesh Morphing](https://www.rbf-morph.com/aerodynamic-optimization-of-a-rear-camera-through-cfd-analysis-and-mesh-morphing/) - Author: L. D'Anastasio University of Rome Tor Vergata I 2022 I English Use the links to download the presentation and the thesis.
- [Towards Digital Twin Technologies for Ascending Aortic Aneurysm Growth Prediction and Real-Time Diagnosis](https://www.rbf-morph.com/towards-digital-twin-technologies-for-ascending-aortic-aneurysm-growth-prediction-and-real-time-diagnosis-2/) - Theses and dissertations 2023. Author: L. Geronzi
- [Improving Vehicular Safety: Customizing Human Body Models through Advanced Mesh Morphing](https://www.rbf-morph.com/improving-vehicular-safety-customizing-human-body-models-through-advanced-mesh-morphing-2/) - Theses and dissertations 2023. Author: E. Lombardi
- [Computational Methods for the Analysis of Ascending Aortic Aneurysms](https://www.rbf-morph.com/computational-methods-for-the-analysis-of-ascending-aortic-aneurysms-3/) - Author: A. Martinez University of Rome Tor Vergata I 2023 I Italian Use the links to download the presentation and the thesis.
- [Aerodynamic Optimization of an Aircraft Using Parametric CAD and Mesh Morphing](https://www.rbf-morph.com/aerodynamic-optimization-of-an-aircraft-using-parametric-cad-and-mesh-morphing/) - Theses and dissertations 2023. Author: G. Magrì
- [Innovative Computational Tools for Enhancing Cardiovascular Surgery Outcomes](https://www.rbf-morph.com/innovative-computational-tools-for-enhancing-cardiovascular-surgery-outcomes-2/) - Theses and dissertations 2023. Author: E. Kardampiki
- [Computational Methods for the Analysis of Ascending Aortic Aneurysms](https://www.rbf-morph.com/computational-methods-for-the-analysis-of-ascending-aortic-aneurysms-2/) - Theses and dissertations 2023. Author: A. Martinez
- [Frontal Impact Performance Optimization of an Automotive Hood through Explicit Finite Element Simulations and Mesh Morphing](https://www.rbf-morph.com/frontal-impact-performance-optimization-of-an-automotive-hood-through-explicit-finite-element-simulations-and-mesh-morphing-3/) - Author: M. Volponi University of Rome Tor Vergata I 2020 I Italian Use the links to download the presentation and the thesis.
- [Fluid Dynamics of Exhaust Manifolds for Internal Combustion Engines](https://www.rbf-morph.com/fluid-dynamics-of-exhaust-manifolds-for-internal-combustion-engines-4/) - Author: W. Savastano University of Rome Tor Vergata I 2011 I Italian Use the links to download the presentation and the thesis.
- [Structural Analysis of the Hub of a Rental Kart and Optimization through Mesh Morphing](https://www.rbf-morph.com/structural-analysis-of-the-hub-of-a-rental-kart-and-optimization-through-mesh-morphing-3/) - Author: L. Mazzaferro University of Rome Tor Vergata I 2017 I Italian Use the links to download the presentation and the thesis.
- [Goal Driven Multi-Objective Shape Optimization for Conjugate Heat Transfer in an Effusion Cooling System of a Combustion Chamber, through a CFD-Mesh-Morphing-Based Approach](https://www.rbf-morph.com/goal-driven-multi-objective-shape-optimization-for-conjugate-heat-transfer-in-an-effusion-cooling-system-of-a-combustion-chamber-through-a-cfd-mesh-morphing-based-approach-3/) - Author: W. Savastano University of Rome Tor Vergata I 2011 I English Use the links to download the presentation and the thesis.
- [Optimization of Sail Settings Using RBF Mesh Morphing](https://www.rbf-morph.com/optimization-of-sail-settings-using-rbf-mesh-morphing-3/) - Author: S. Ramirez University of Rome Tor Vergata I 2012 I English Use the links to download the presentation and the thesis.
- [Aerodynamic Optimization of a MotoGP Motorcycle Using CFD and Mesh Morphing](https://www.rbf-morph.com/aerodynamic-optimization-of-a-motogp-motorcycle-using-cfd-and-mesh-morphing-3/) - Author: F. Ricci University of Rome Tor Vergata I 2022 I Italian Use the links to download the presentation and the thesis.
- [Shape Optimization of a Helical Spring Using the Biological Growth Method](https://www.rbf-morph.com/11358-2/) - Author: E. Lombardi University of Rome Tor Vergata I 2019 I Italian Use the links to download the thesis.
- [A Characterization of the Vertebral Body of L1 Vertebra’s Mechanical Properties through Statistical Shape and Appearance Modelling](https://www.rbf-morph.com/a-characterization-of-the-vertebral-body-of-l1-vertebras-mechanical-properties-through-statistical-shape-and-appearance-modelling/) - Author: F. Pais University of Rome Tor Vergata I 2020 I Italian Use the links to download the presentation and the thesis.
- [Analysis of Vortex Induced Vibration of a Thermowell by High Fidelity FSI Numerical Analysis Based on RBF Structural Modes Embedding](https://www.rbf-morph.com/analysis-of-vortex-induced-vibration-of-a-thermowell-by-high-fidelity-fsi-numerical-analysis-based-on-rbf-structural-modes-embedding-2/) - Author: A. Felici University of Rome Tor Vergata I 2019 I Italian Use the links to download the presentation and the thesis.
- [Evaluation of ‘As Built’ Performance of Mechanical Components Using Mesh Morphing Techniques](https://www.rbf-morph.com/evaluation-of-as-built-performance-of-mechanical-components-using-mesh-morphing-techniques-3/) - Author: F. Scarpitta University of Rome Tor Vergata I 2018 I Italian Use the links to download the presentation and the thesis.
- [Optimization Methods for External and Internal Flows Using CFD Adjoint and Mesh Morphing](https://www.rbf-morph.com/optimization-methods-for-external-and-internal-flows-using-cfd-adjoint-and-mesh-morphing-2/) - Author: A. Lopez University of Rome Tor Vergata I 2019 I Italian Use the links to download the presentation and the thesis.
- [Aerodynamic Optimization of an Aircraft Using Parametric CAD and Mesh Morphing](https://www.rbf-morph.com/aerodynamic-optimization-of-an-aircraft-using-parametric-cad-and-mesh-morphing-2/) - Author: G. Magrì University of Rome Tor Vergata I 2023 I Italian Use the links to download the presentation and the thesis.
- [Go-Kart Aerodynamic Optimization by Means of CFD and RBF Mesh Morphing](https://www.rbf-morph.com/go-kart-aerodynamic-optimization-by-means-of-cfd-and-rbf-mesh-morphing/) - Authors: C. Del Bene, R. Anello University of Rome Tor Vergata I 2014 I Italian Use the links to download the presentation or thesis.
- [Advanced Optimization of the WT Model of the RIBES Project](https://www.rbf-morph.com/advanced-optimization-of-the-wt-model-of-the-ribes-project-2/) - Author: D. Beltramme University of Rome Tor Vergata I 2013 I English Use the links to download the thesis.
- [Upcoming Workshop on Metrology and Reverse Engineering](https://www.rbf-morph.com/upcoming-workshop-on-metrology-and-reverse-engineering/) - With only a few weeks remaining, preparations are well underway for the forthcoming Metrology and Reverse Engineering Workshop, organized by Fusion for Energy (F4E). The RBF Morph team is pleased to participate in this initiative and to contribute to the program with an online session scheduled for 5 December 2025. The speakers will present recent
- [Acceleration of the Aerodynamic Design Workflow: A Plugin for Alias Based on Radial Basis Functions](https://www.rbf-morph.com/acceleration-of-the-aerodynamic-design-workflow-a-plugin-for-alias-based-on-radial-basis-functions/) - Author: D. Zambon University of Rome Tor Vergata I 2025 I Italian Use the links to download the thesis.
- [Advancing CAD–CFD Integration with RBF Morph: A New Thesis on Accelerating Aerodynamic Design](https://www.rbf-morph.com/advancing-cad-cfd-integration-with-rbf-morph-a-new-thesis-on-accelerating-aerodynamic-design/) - We are glad to present a new thesis featuring RBF Morph software, developed by Davide Zambon at Università Ca’ Foscari Venezia during the academic year 2024/2025. The thesis, titled “Acceleration of the Aerodynamic Design Workflow: A Plugin for Alias Based on Radial Basis Functions," investigates the integration of Radial Basis Functions within Autodesk Alias to accelerate the aerodynamic design workflow. The work
- [High Fidelity Fluid-Structure Interaction by Radial Basis Functions Mesh Adaption of Moving Walls: A Workflow Applied to an Aortic Valve](https://www.rbf-morph.com/high-fidelity-fluid-structure-interaction-by-radial-basis-functions-mesh-adaption-of-moving-walls-a-workflow-applied-to-an-aortic-valve-2/) - See the link Published in Journal of Computational Science Volume 51, April 2021
- [A Novel Formulation for the Study of the Ascending Aortic Fluid Dynamics with In Vivo Data](https://www.rbf-morph.com/a-novel-formulation-for-the-study-of-the-ascending-aortic-fluid-dynamics-with-in-vivo-data-3/) - See the link Published in Medical Engineering & Physics Volume 91, May 2021
- [An RBF Meshless Approach to Evaluate Strain Due to Large Displacements in Flexible Printed Circuit Boards](https://www.rbf-morph.com/an-rbf-meshless-approach-to-evaluate-strain-due-to-large-displacements-in-flexible-printed-circuit-boards-2/) - Download the pdf Published in Micromachines 2022, 13 (8), 1163, 2022
- [Preliminary Design of the Cold Mass Supports for the EU DEMO Feeders](https://www.rbf-morph.com/preliminary-design-of-the-cold-mass-supports-for-the-eu-demo-feeders/) - See the link Fusion Engineering and Design Volume 188, March 2023, 113418 – DOI: https://doi.org/10.1016/j.fusengdes.2023.113418
- [Towards a Reduced Order Model for EVAR Planning and Intra-Operative Navigation](https://www.rbf-morph.com/towards-a-reduced-order-model-for-evar-planning-and-intra-operative-navigation/) - Published on Medical Engineering & Physics Volume 131, September 2024, 104229, DOI https://doi.org/10.1016/j.medengphy.2024.104229
- [Prosthetist-Specific Rectification Templates Based on Artificial Intelligence for the Digital Fabrication of Custom Transtibial Sockets](https://www.rbf-morph.com/prosthetist-specific-rectification-templates-based-on-artificial-intelligence-for-the-digital-fabrication-of-custom-transtibial-sockets/) - Download the pdf published in MDPI, Section Orthopedics and Rehabilitation, September 2024 https://www.rbf-morph.com/wp-content/uploads/2024/09/prosthesis-06-00083-with-cover.pdf
- [Shape Optimization of a Roots Blower Rotor Profile Using CFD Model with a Coupled Adjoint-sculpting Method](https://www.rbf-morph.com/shape-optimization-of-a-roots-blower-rotor-profile-using-cfd-model-with-a-coupled-adjoint-sculpting-method/) - Download the pdf published in the Purdue University Repository, October 2024 https://www.rbf-morph.com/wp-content/uploads/2024/11/Shape-Optimization-of-a-Roots-Blower-Rotor-Profile-Using-CFD-Mode.pdf
- [Reduced-Order Model of a Time-Trial Cyclist Helmet for Aerodynamic Optimization Through Mesh Morphing and Enhanced with Real-Time Interactive Visualization](https://www.rbf-morph.com/reduced-order-model-of-a-time-trial-cyclist-helmet-for-aerodynamic-optimization-through-mesh-morphing-and-enhanced-with-real-time-interactive-visualization/) - Download the pdf published in MDPI, Section Fluids, December 2024 https://www.rbf-morph.com/wp-content/uploads/2024/12/fluids-09-00300-v2.pdf
- [Numerical Simulation of Snowdrift Development in Non-Equilibrium Flow Fields Around Buildings](https://www.rbf-morph.com/numerical-simulation-of-snowdrift-development-in-non-equilibrium-flow-fields-around-buildings/) - Read the article published in MDPI, Section Fluids, March 2025 https://www.rbf-morph.com/storage/2024/12/fluids-09-00300-v2.pdf
- [Towards Digital Twin Technologies for Ascending Aortic Aneurysm Growth Prediction and Real-Time Diagnosis](https://www.rbf-morph.com/towards-digital-twin-technologies-for-ascending-aortic-aneurysm-growth-prediction-and-real-time-diagnosis-3/) - Author: L. Geronzi University of Rome Tor Vergata I 2022 I English Use the links to download the presentation and the thesis.
- [Structural Optimization of Thermal Turbine Blade Roots Using the Biological Growth Method](https://www.rbf-morph.com/structural-optimization-of-thermal-turbine-blade-roots-using-the-biological-growth-method-2/) - Author: S. Putzu University of Rome Tor Vergata I 2017 I Italian Use the links to download the presentation and the thesis.
- [Development of Computational Tools for Cardiovascular Applications](https://www.rbf-morph.com/development-of-computational-tools-for-cardiovascular-applications/) - Author: E. Kardampiki University of Rome Tor Vergata I 2023 I English Use the links to download the presentation and the thesis.
- [Multi-Physics and Multi-Fidelity Approaches for Digital Twin Integration](https://www.rbf-morph.com/multi-physics-and-multi-fidelity-approaches-for-digital-twin-integration-2/) - Author: A. Lopez University of Rome Tor Vergata I 2024 I English Use the links to download the presentation and the thesis.
- [Setup and Validation of High Fidelity Aeroelastic Analysis Methods Based on RBF Mesh Morphing](https://www.rbf-morph.com/setup-and-validation-of-high-fidelity-aeroelastic-analysis-methods-on-rbf-mesh-morphing/) - Author: U. Cella University of Rome Tor Vergata I 2015 I English Use the links to download the presentation and the thesis.
- [DLR-F6 Design Optimization by Means of Radial Basis Functions Mesh Morphing](https://www.rbf-morph.com/dlr-f6-design-optimization-by-means-of-radial-basis-functions-mesh-morphing/) - Author: M. Gozzi University of Rome Tor Vergata I 2013 I Italian Use the links to download the presentation and the thesis.
- [Structural Optimization of an Automotive Wheel Rim Using the BGM Method](https://www.rbf-morph.com/structural-optimization-of-an-automotive-wheel-rim-using-the-bgm-method/) - Author: M. Bisin University of Rome Tor Vergata I 2023 I Italian English Use the links to download the presentation and the thesis.
- [Digital Twin for the Aerodynamic Development of a MotoGP Motorcycle through Mesh Morphing and Reduced-Order Models](https://www.rbf-morph.com/digital-twin-for-the-aerodynamic-development-of-a-motogp-motorcycle-through-mesh-morphing-and-reduced-order-models/) - Author: F. Bardelloni University of Rome Tor Vergata I 2022 I Italian Use the links to download the presentation and the thesis.
- [Structural Optimization of a Four-Stroke Engine Connecting Rod: from High-Fidelity FEM Simulation to Artificial Intelligence](https://www.rbf-morph.com/structural-optimization-of-a-four-stroke-engine-connecting-rod-from-high-fidelity-fem-simulation-to-artificial-intelligence/) - Author: D, Lampasona University of Rome Tor Vergata I 2023 I Italian-English Use the links to download the presentation and the thesis.
- [RBF Morph 2025 Webinar with the Avicenna Alliance](https://www.rbf-morph.com/rbf-morph-2025-webinar-with-the-avicenna-alliance/) - Use the link below to download the presentation: Presentation: “Real-Time Medical Digital Twins: Geometry, Simulation, and Immersive Interaction"
- [The Avicenna Alliance Webinar Featuring RBF Morph 2025](https://www.rbf-morph.com/the-avicenna-alliance-webinar-featuring-rbf-morph-2025/) - Our second RBF Morph webinar hosted and organized by the Avicenna Alliance was a success. On November 11, 2025, the webinar "Real-Time Medical Digital Twins: Geometry, Simulation, and Immersive Interaction" featured Marco Evangelos Biancolini, Founder of RBF Morph, who explored how real-time medical Digital Twins are transforming healthcare. The session examined the integration of geometry,
- [EUCASS 2025](https://www.rbf-morph.com/eucass-2025-2/) - Use the link below to download the presentation Presentation: “Dynamic Response of the VEGA C Launch Vehicle Subjected to Wind Effect on Ground”
- [AIAS 2024](https://www.rbf-morph.com/aias-2024/) - September I 2024 I Italian Use the links below to download the presentation: Presentation: Shape Optimization of Frame Structures through a Mixed Analytical-2D and Numerical-3D Approach
- [AIAS 2024](https://www.rbf-morph.com/aias-2024-2/) - September I 2024 I English Use the links below to download the presentation: Presentation: The Payload Design of the Cubesat Solar Polarimeter (CUSP) for Space Weather and Solar Flares X-Ray Polarimetry
- [ICAS 2024](https://www.rbf-morph.com/icas-2024/) - Use the links below to download the presentation: Presentation: Efficient Shape Optimization in Aeronautics: Integrating Parametric CAD and Mesh Morphing for Enhanced Aerodynamic Performance
- [SOFT 2024](https://www.rbf-morph.com/soft-2024/) - Use the links below to download the presentation: Presentation: 𝘝𝘢𝘭𝘪𝘥𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘝𝘢𝘤𝘶𝘶𝘮 𝘝𝘦𝘴𝘴𝘦𝘭 𝘛𝘩𝘦𝘳𝘮𝘢𝘭 𝘚𝘩𝘪𝘦𝘭𝘥 𝘋𝘦𝘧𝘰𝘳𝘮𝘢𝘵𝘪𝘰𝘯 𝘷𝘪𝘢 𝘍𝘪𝘯𝘪𝘵𝘦 𝘌𝘭𝘦𝘮𝘦𝘯𝘵𝘴 𝘢𝘯𝘥 𝘔𝘰𝘳𝘱𝘩𝘪𝘯𝘨 𝘛𝘦𝘤𝘩𝘯𝘪𝘲𝘶𝘦𝘴 𝘉𝘢𝘴𝘦𝘥 𝘈𝘯𝘢𝘭𝘺𝘴𝘪𝘴
- [Car Body Pressure Prediction: a Case Study](https://www.rbf-morph.com/car-body-pressure-prediction-a-case-study/) - Use the link below to download the presentation: Presentation: Car Body Pressure Prediction
- [SOFT 2024](https://www.rbf-morph.com/soft-2024-2/) - Use the links below to download the presentation Presentation: First Thermo-Structural Vacuum Barrier Design for EU DEMO Feeders News
- [THUMS User Meeting 2024](https://www.rbf-morph.com/10864-2/) - Use the link below to download the presentation: Presentation: 𝘏𝘶𝘮𝘢𝘯 𝘉𝘰𝘥𝘺 𝘔𝘰𝘥𝘦𝘭𝘴 𝘊𝘶𝘴𝘵𝘰𝘮𝘪𝘻𝘢𝘵𝘪𝘰𝘯 𝘣𝘺 𝘈𝘥𝘷𝘢𝘯𝘤𝘦𝘥 𝘔𝘦𝘴𝘩 𝘔𝘰𝘳𝘱𝘩𝘪𝘯𝘨: 𝘗𝘢𝘳𝘢𝘮𝘦𝘵𝘳𝘪𝘤 𝘛𝘏𝘜𝘔𝘚
- [𝐋𝐄𝐒𝐒-𝐈𝐂𝐄: Multiscale LES Simulation for in Flight ICE Accretion Simulation](https://www.rbf-morph.com/𝐋𝐄𝐒𝐒-𝐈𝐂𝐄-multiscale-les-simulation-for-in-flight-ice-accretion-simulation/) - Use the link below to download the presentation: Presentation: 𝐋𝐄𝐒𝐒-𝐈𝐂𝐄: Multiscale LES Simulation for in Flight ICE Accretion Simulation
- [Tech Transfer Day 2024](https://www.rbf-morph.com/tech-transfer-day-2024/) - Use the link below to download the presentation: Presentation: DigiPAD: Digital Twin for Advanced Design in the Aerospace Industry
- [𝐑𝐢𝐮𝐧𝐢𝐨𝐧𝐞 𝐏𝐥𝐞𝐧𝐚𝐫𝐢𝐚 𝐒𝐩𝐨𝐤𝐞 9 𝐢𝐍𝐄𝐒𝐓 2025](https://www.rbf-morph.com/𝐑𝐢𝐮𝐧𝐢𝐨𝐧𝐞-𝐏𝐥𝐞𝐧𝐚𝐫𝐢𝐚/) - Use the link below to download the presentation: Presentation: 𝐑𝐎𝐌𝐞𝐝2𝐕𝐑 – 𝐀𝐝𝐯𝐚𝐧𝐜𝐢𝐧𝐠 𝐌𝐞𝐝𝐢𝐜𝐚𝐥 𝐃𝐢𝐠𝐢𝐭𝐚𝐥 𝐓𝐰𝐢𝐧𝐬 𝐰𝐢𝐭𝐡 𝐕𝐑
- [Ansys Cardiovascular Symposium Spring 2025](https://www.rbf-morph.com/ansys-cardiovascular-symposium-spring-2025/) - Use the link below to download the presentation: Presentation: Accelerating Cardiovascular Pre-Operative Planning and Building Large Cohorts of Patient-Realistic Modeling: the mesh Morphing Solution
- [Digital Engineering Day Roma 2025](https://www.rbf-morph.com/digital-engineering-day-roma-2025/) - Use the link below to download the presentation: Presentation: Structural Optimization of Internal Combustion Engines Using RBF Mesh Morphing
- [Ansys EMEA Transportation Summit and LS-DYNA User Conference 2025](https://www.rbf-morph.com/ansys-emea-transportation-summit-and-ls-dyna-user-conference-2025/) - Use the link below to download the presentation: Presentation: "Occupant- Specific Safety Assessment Using a Parametric THUMS Model"
- [Digital Engineering Day Roma 2025: Structural Optimization of Combustion Engines Using RBF Mesh Morphing](https://www.rbf-morph.com/digital-engineering-day-roma-2025-structural-optimization-of-combustion-engines-using-rbf-mesh-morphing/) - Today in Rome, the Digital Engineering Day, organized by ESSS Italy, brought together researchers, engineers, and industry leaders to showcase how simulation technologies are transforming the way products are designed, tested, and optimized. The event highlighted the growing importance of digital workflows, simulation-driven design, and digital twins in accelerating innovation across multiple sectors. Among the
- [EUCASS 2025 Conference Presentation Now Available for Download](https://www.rbf-morph.com/eucass-2025-conference-presentation-now-available-for-download/) - Title: Dynamic Response of the VEGA C Launch Vehicle Subjected to Wind Effect on Ground Presented at: EUCASS 2025 We are pleased to announce that the presentation developed through the collaboration between AVIO, RBF Morph, and the University of Rome Tor Vergata is now available for download. Authors: Fabio Paglia (AVIO) Marta Colella (AVIO) Marco E. Biancolini (University of Rome Tor
- [RBF Morph at CM3 – Transport 2025](https://www.rbf-morph.com/rbf-morph-at-cm3-transport-2025/) - RBF Morph will participate in the upcoming CM3 – Transport 2025 | Technologies for Smart and Sustainable Transport Systems conference, organized by the Università degli Studi di Trieste in collaboration with CIRA. The event will take place in Trieste, Italy, from 24 to 26 September 2025. This international conference addresses one of the most pressing
- [rbfLAB at the AIAS Conference 2025](https://www.rbf-morph.com/rbf-morph-at-the-aias-conference-2025/) - rbfLAB, part of the University of Rome Tor Vergata, will participate in the 54th AIAS Conference, which will take place from September 3 to 6, 2025, in the city of Florence at the Centro Didattico Morgagni (CDM) of the University of Florence. The AIAS Conference has long been a central event for the Italian and
- [NAFEMS Italy Conference 2024](https://www.rbf-morph.com/nafems-italy-conference-2024/) - Use the link below to download the presentation: Presentation: Reduced-Order Model of a Time-Trial Cyclist Helmet for Aerodynamic Optimization through Mesh Morphing and Real-Time Interactive Visualization
- [RBF Morph Collaborates on Pioneering Automotive Design Study Published in Futurities](https://www.rbf-morph.com/rbf-morph-collaborates-on-pioneering-automotive-design-study-published-in-futurities/) - A new article published in the Summer 2025 issue of Futurities spotlights a breakthrough in multi-physics optimization for automotive wheel design, featuring a powerful collaboration between RBF Morph, the University of Rome “Tor Vergata”, and Nissan Technical Centre Europe. The publication, titled “Smarter wheels: How multi-physics optimization is shaping the future of automotive design”, was
- [New Thesis Explores Biomechanical Characterization of the L1 Vertebra through Statistical Modelling and Mesh Morphing](https://www.rbf-morph.com/new-thesis-explores-biomechanical-characterization-of-the-l1-vertebra-through-statistical-modelling-and-mesh-morphing/) - A new Master’s thesis by Francesco Pais, completed at the University of Rome Tor Vergata, introduces an innovative approach to the biomechanical characterization of the L1 vertebral body. The study, titled "A characterization of the vertebral body of L1 vertebra’s mechanical properties through Statistical Shape and Appearance Modelling", is now available for download and represents
- [SafeBot4Twin: Secure LLM-Based Chatbot for Medical Digital Twin Management](https://www.rbf-morph.com/safebot4twin-secure-llm-based-chatbot-for-medical-digital-twin-management/) - SafeBot4Twin is an EU-funded project by the Cyber 4.0 competence center, uniting RBF Morph and MedTech startup LivGemini to develop a secure chatbot powered by Large Language Models (LLMs) for managing medical digital twins. These twins rely on sensitive clinical data, increasingly targeted by cyberattacks. The project addresses the need for intuitive, secure tools that
- [New Thesis Published in Collaboration with Piaggio and RBF Morph](https://www.rbf-morph.com/new-thesis-published-in-collaboration-with-piaggio-and-rbf-morph/) - A new thesis by Danilo Lampasona, conducted at the University of Rome Tor Vergata in collaboration with Piaggio and RBF Morph, is now available on our website. The title is: Structural Optimization of a Four-Stroke Engine Connecting Rod: from High-Fidelity FEM Simulation to Artificial Intelligence The work focuses on the structural optimization of a connecting
- [Digital Twin for the Aerodynamic Development of a MotoGP Motorcycle through Mesh Morphing and Reduced-Order Models](https://www.rbf-morph.com/digital-twin-for-the-aerodynamic-development-of-a-motogp-motorcycle-through-mesh-morphing-and-reduced-order-models-2/) - The thesis Digital Twin for the Aerodynamic Development of a MotoGP Motorcycle through Mesh Morphing and Reduced-Order Models, presented by Filippo Bardelloni at the University of Rome Tor Vergata, outlines a complete simulation-driven design workflow for aerodynamic optimization in motorsports. The work combines RBF Morph, Ansys Fluent, and Ansys Twin Builder to enable geometry parameterization,
- [New Thesis on Structural Optimization of an Automotive Wheel Rim Now Available](https://www.rbf-morph.com/new-thesis-on-structural-optimization-of-an-automotive-wheel-rim-now-available/) - RBF Morph is pleased to present a thesis by Matteo Bisin, University of Rome Tor Vergata, that highlights the advanced capabilities of our technology in the field of structural optimization: "Structural Optimization of an Automotive Wheel Rim Using the BGM Method." This thesis focuses on the optimization of a real aluminum alloy wheel rim provided
- [A Pioneering Thesis That Sparked Two EU-Funded Projects: RBF4AERO and RIBES](https://www.rbf-morph.com/a-pioneering-thesis-that-sparked-two-eu-funded-projects-rbf4aero-and-ribes/) - We are proud to spotlight a Master’s thesis that not only laid the groundwork for cutting-edge research in aerodynamic optimization but was also conducted within a foundational research project that ultimately gave rise to two major EU-funded initiatives: RBF4AERO and RIBES. Titled “DLR-F6 Design Optimization by Means of Radial Basis Functions Mesh Morphing,” this thesis
- [RBF Morph to Present at EUCASS 2025 in Rome](https://www.rbf-morph.com/rbf-morph-to-present-at-eucass-2025-in-rome/) - RBF Morph is pleased to announce its participation in the 9th European Conference for AeroSpace Sciences (EUCASS 2025), which will be held from 30 June to 4 July in Rome, Italy. We will be presenting the research work titled:"Dynamic Response of the Vega C Launch Vehicle Subjected to Wind Effect on Ground" The authors of
- [PhD Research Spotlight: Ubaldo Cella’s Contribution to Aeroelastic Analysis at Tor Vergata](https://www.rbf-morph.com/phd-research-spotlight-ubaldo-cellas-contribution-to-aeroelastic-analysis-at-tor-vergata/) - We're excited to spotlight the 2015 doctoral research of Ubaldo Cella, 𝘚𝘦𝘵𝘶𝘱 𝘢𝘯𝘥 𝘝𝘢𝘭𝘪𝘥𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘏𝘪𝘨𝘩 𝘍𝘪𝘥𝘦𝘭𝘪𝘵𝘺 𝘈𝘦𝘳𝘰𝘦𝘭𝘢𝘴𝘵𝘪𝘤 𝘈𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘔𝘦𝘵𝘩𝘰𝘥𝘴 𝘉𝘢𝘴𝘦𝘥 𝘰𝘯 𝘙𝘉𝘍 𝘔𝘦𝘴𝘩 𝘔𝘰𝘳𝘱𝘩𝘪𝘯𝘨. The bases of this work refer to a collaboration between the University of Rome “Tor Vergata” and the aircraft industry Piaggio Aerospace aimed to the implementation of FSI (Fluid Structure
- [Multi-Physics and Multi-Fidelity Approaches for Digital Twin Integration](https://www.rbf-morph.com/multi-physics-and-multi-fidelity-approaches-for-digital-twin-integration/) - Andrea Lopez’s doctoral research, conducted at the University of Rome Tor Vergata, presents a comprehensive methodology for integrating multi-physics and multi-fidelity analyses within digital twin frameworks. The thesis, titled "Multi-Physics and Multi-Fidelity Approaches for Digital Twin Integration," proposes innovative workflows and optimization strategies to enable real-time data access and simulation interoperability across diverse modeling environments.
- [NAFEMS World Congress 2025 — RBF Morph is Proud to Be Part of It!](https://www.rbf-morph.com/nafems-world-congress-2025-rbf-morph-is-proud-to-be-part-of-it/) - We’re thrilled to announce that RBF Morph will be participating in the NAFEMS World Congress 2025, the premier global event dedicated exclusively to engineering simulation. Join us in Salzburg, Austria from 19–22 May 2025 for an inspiring gathering of minds shaping the future of digital engineering. This year's congress promises to be bigger and better
- [Smart Mesh Morphing for Snowdrift Analysis in Challenging Wind Environments](https://www.rbf-morph.com/smart-mesh-morphing-for-snowdrift-analysis-in-challenging-wind-environments/) - We’re proud to highlight a collaborative effort between the University of Rome Tor Vergata and ANSYS Japan K.K., featured in the study: “𝘕𝘶𝘮𝘦𝘳𝘪𝘤𝘢𝘭 𝘚𝘪𝘮𝘶𝘭𝘢𝘵𝘪𝘰𝘯 𝘰𝘧 𝘚𝘯𝘰𝘸𝘥𝘳𝘪𝘧𝘵 𝘋𝘦𝘷𝘦𝘭𝘰𝘱𝘮𝘦𝘯𝘵 𝘪𝘯 𝘕𝘰𝘯-𝘌𝘲𝘶𝘪𝘭𝘪𝘣𝘳𝘪𝘶𝘮 𝘍𝘭𝘰𝘸 𝘍𝘪𝘦𝘭𝘥𝘴 𝘈𝘳𝘰𝘶𝘯𝘥 𝘉𝘶𝘪𝘭𝘥𝘪𝘯𝘨𝘴”Authors: Ryu Nara, Corrado Groth, and Marco Evangelos Biancolini. This research centers on the use of RBF Morph, a state-of-the-art mesh morphing tool,
- [Reshaping Automotive Components with Advanced RBF Mesh Morphing](https://www.rbf-morph.com/reshaping-automotive-components-with-advanced-rbf-mesh-morphing/) - Published in Automotive CAE Companion 2025-2026 Download the PDF
- [Automotive CAE Companion 2025/2026 Edition Released: RBF Morph is in](https://www.rbf-morph.com/automotive-cae-companion-2025-2026-edition-released-rbf-morph-is-in/) - We are pleased to announce the release of the 2025/2026 edition of the AUTOMOTIVE CAE COMPANION, a comprehensive and freely available handbook dedicated to the advancement of Computer Aided Engineering (CAE) in the automotive industry. This updated edition provides a wealth of in-depth knowledge, case studies, and methodologies that reflect the evolving challenges and innovations
- [RBF Morph at the Ansys Cardiovascular Symposium 2025](https://www.rbf-morph.com/rbf-morph-at-the-ansys-cardiovascular-symposium-2025/) - RBF Morph was thrilled to be part of the 2nd online Ansys Cardiovascular Symposium, happening on April 3rd, from 10 AM to 12 PM EDT. This was a fantastic opportunity to explore the latest advancements in in silico cardiovascular modeling and exchange insights with leading experts. Featured Speakers: 🔹 Marco Evangelos Biancolini (RBF Morph) 🔹
- [Ansys Simulation World 2024](https://www.rbf-morph.com/ansys-simulation-world-2024/) - Use the link below to download the presentation: Presentation: Enabling Medical Digital Twin through Advanced Mesh Morphing and High-Fidelity Patient-Spacific Simulations
- [RBF Morph at the Ansys Simulation World 2024](https://www.rbf-morph.com/rbf-morph-at-the-ansys-simulation-world-2024/) - We’re thrilled to announce our participation in the upcoming virtual event, Ansys Simulation World, taking place from May 14-16, 2024.
- [ROMedVR Project Featured in the Latest Issue of the Avicenna Alliance Newsletter](https://www.rbf-morph.com/romedvr-project-featured-in-the-latest-issue-of-the-avicenna-alliance-newsletter/) - The ROMedVR project is pioneering advancements in pre-surgical planning for Congenital Heart Diseases (CHDs) through the integration of Computational Fluid Dynamics (CFD), Reduced Order Modeling, and Virtual Reality (VR). This interdisciplinary approach aims to enhance surgical decision-making by enabling patient-specific, optimized interventions, thereby improving clinical outcomes. Consortium and Contributions The project is driven by a
- [New Research on Thermal Shield Deformation in Fusion Reactors Published in Fusion Engineering and Design](https://www.rbf-morph.com/new-research-on-thermal-shield-deformation-in-fusion-reactors-published-in-fusion-engineering-and-design/) - A new study led by researchers from the University of Rome Tor Vergata has been published in Fusion Engineering and Design. The paper presents an innovative methodology for evaluating the deformation of the Vacuum Vessel Thermal Shield (VVTS) using finite element analysis combined with morphing techniques. Title: Validation of Vacuum Vessel Thermal Shield Deformation via
- [Our Research on Thermo-Structural Optimization of the Vacuum Barrier for EU DEMO Feeders Published in Science Direct](https://www.rbf-morph.com/our-research-on-thermo-structural-optimization-of-the-vacuum-barrier-for-eu-demo-feeders-published-in-science-direct/) - We are pleased to announce the publication of our latest research, "Advanced Thermo-Structural Optimization of the Vacuum Barrier for EU DEMO Feeders," by Corrado Groth, Andrea Chiappa, and Marco Evangelos Biancolini, now available in Science Direct. Conducted in collaboration with the University of Rome Tor Vergata and EUROfusion, this study addresses key engineering challenges in
- [Image-Based and RBF Mesh Morphing CFD Simulation for aTAA Hemodynamic](https://www.rbf-morph.com/an-image-based-and-rbf-mesh-morphing-cfd-simulation-for-ataa-hemodynamic/) - A new application of RBF Morph was presented at The Italian Chapter of the European Society of Biomechanics (ESB-ITA) which held in Rome (Italy) in September 28-29, 2017. The aim of study is to propose a novel computational approach built up by integrating patient specific images and flow data with RBF morphing techniques into FE simulations An image-based and
- [Ridurre le concentrazioni di tensione con il mesh morphing in Analisi e Calcolo](https://www.rbf-morph.com/ridurre-le-concentrazioni-di-tensione-con-il-mesh-morphing-in-the-journal-ac/) - A new article about RBF Morph has been published on the Italian journal “Analisi e Calcolo” n° 81 Jul. 2017. The case study of the Generic Turbine Blade created and made available from ANSYS Inc., shows the advantages of mesh morphing tecnique and meets the needs of the turbomachinery industry. Abstract: Il mesh morphing
- [Aircraft and Car Shape Optimization on the RBF4AERO Platform](https://www.rbf-morph.com/article-aircraft-car-shape-optimization-on-the-rbf4aero-platform/) - In this paper the solution of industrial aerodynamic shape optimization problems using the optimization methods provided by the RBF4AERO platform, developed in the framework of the EU–funded RBF4AERO project, is demostred. The platform provides a complete infrastructure needed for optimization problems, including GUI, Optimization Algorithms, CFD Solvers, Morpher Tool and Benchmark Management System. Both stochastic and
- [Papers Presented at CAE 2017 Are Now Available for Download](https://www.rbf-morph.com/apers-presented-at-cae-2017-are-now-available-to-download/) - The presentations given by RBF Morph team at 33th edition of International CAE Conference that was held in Vicenza (Italy) 6-7 November 2017, can be download in the Presentations and Proceedings 2017. The papers will be published shortly.
- [RBF Morph Featured in the EnginSoft Newsletter, Year 14, Issue 3, Autumn 2017.](https://www.rbf-morph.com/rbf-morph-published-on-the-newsletter-enginsoft-year-14-n-3-autumn-2017/) - RBF Morph published on the NewsletterYear 14 n. 3 Autumn 2017 an article on how multi-objective optimizations, combined with experienced aerodynamic design, is the most efficient strategy to face challenging designs as theimprovements of fast foiling catamarans performances in regatta. The core of the method is the parameterization of the geometry implemented by a mesh morphing
- [Evaluation of Go-Kart Aerodynamic Efficiency Using CFD, RBF Mesh Morphing and Lap Time Simulation](https://www.rbf-morph.com/evaluation-of-go-kart-aerodynamic-efficiency-using-cfd-rbf-mesh-morphing-and-lap-time-simulation/) - An article about CFD, RBF mesh morphing and lap time simulation-based analysis method to investigate the effect of aerodynamic drag on go-kart performance having title “Evaluation of go-kart aerodynamic efficiency using CFD, RBF mesh morphing and lap time simulation" has been published on the journal International Journal of Aerodynamics Volume 5, Issue 3-4. Available online
- [Multidisciplinary Shape Optimization of Ductile Iron Castings by Considering Local Microstructure and Material Behaviour](https://www.rbf-morph.com/multidisciplinary-shape-optimization-of-ductile-iron-castings-by-considering-local-microstructure-and-material-behaviour/) - The study titled Multidisciplinary shape optimization of ductile iron castings by considering local microstructure and material behaviour conducted by Sacmi Imola in collaboration with Jönköping University and presented at 12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), is avaible here. Abstract During the casting process and solidification of ductile iron castings, a heterogeneous microstructure
- [FTGM Wins Ansys Hall of Fame 2018 Competition Using RBF Morph](https://www.rbf-morph.com/ftgm-wins-2018-hall-of-fame-competition-using-rbf-morph/) - FTGM (Fondazione Toscana Gabriele Monasterio) is the winner of the Ansys Hall of Fame 2018 world competition in Academic Session. Using ANSYS CFD and RBF Morph, researchers created a virtual statistical patient to analyze the blood flow and blood pressure alterations during the transition of the aorta from a healthy to an aneurysmatic state. Application Summary In clinical practice,
- [Multidisciplinary Shape Optimization of Ductile Iron Castings by Considering Local Microstructure and Material Behaviour](https://www.rbf-morph.com/multidisciplinary-shape-optimization-of-ductile-iron-castings-by-considering-local-microstructure-and-material-behaviour-2/) - The study conducted by Sacmi Imola in collaboration with Jönköping University having title “Multidisciplinary shape optimization of ductile iron castings by considering local microstructure and material behaviour” has been published on the journal “Structural and Multidisciplinary Optimization” Volume 57 Issue 271. Available online at https://link.springer.com/journal/158 Authors: Jakob Olofsson, Riccardo Cenni, Matteo Cova, Giacomo Bertuzzi, Kent Salomonsson,Joel Johansson Abstract During the casting process and solidification of ductile iron castings, a
- [The Presentations Given at the ANSYS Innovation User Conference 2018 Are Now Available for Download](https://www.rbf-morph.com/presentations-presented-at-ansys-innovation-user-conference-2018-are-now-available-to-download/) - The presentations given by Prof. M.E Biancolini at the ANSYS Innovation User Conference 2018 that was held in Coventry on 2nd & 3rd May 2018 can be download in the Presentations and Proceedings 2018. Fast FSI in the Fluent Solver using RBF Morph Modal Superposition Method Structural modes embedding is a key enabler to tackle advanced FSI applications. The
- [RBF Morph at the AIAS Conference 2018](https://www.rbf-morph.com/rbf-morph-at-aias-conference-2018/) - The RBF Morph Team took part in the 47th edition of the Italian Conference AIAS 2018 that held in Villa San Giovanni (Italy) 5-8 September, 2018. Two works about the different applications of RBF Morph technology have been presented: Automatic shape optimization of structural components with manufacturing constraints Among optimization procedures, mesh morphing gained a relevant position: it
- [How RBF Mesh Morphing Can Boost Multi-Physics Simulation of Vehicle 4.0](https://www.rbf-morph.com/how-rbf-mesh-morphing-can-boost-multi-physics-simulation-of-vehicle-4-0/) - The presentation titled How RBF mesh morphing can boost multi-physics simulation of vehicle 4.0 by Prof. M.E Biancolini at the SAE International Workshop that was held in University of Roma 3 on 3 October can be download in the Presentations and Proceedings 2018. The aim of this Workshop is to update the participants on the
- [Our Presentation Given at the 2nd GMGW Is Now Available for Download](https://www.rbf-morph.com/rbf-morph-at-geometry-and-mesh-generation-workshop/) - RBF Morph took part in the second edition of the Geometry and Mesh Generation Workshop which held in San Diego January 5 and 6 2019. GMGW assess the current state-of-the art in geometry and mesh generation technology and software as applied to aircraft and spacecraft systems. We presented, in collaboration with ANSYS, a sophisticated geometric parameterization
- [Virtual Human Bone Modelling by Interactive Sculpting, Mesh Morphing and Force-Feedback](https://www.rbf-morph.com/virtual-human-bone-modelling-by-interactive-sculpting-mesh-morphing-and-force-feedback/) - An article about the role of interactive sculpting and radial basis function (RBF) mesh morphing in the field of biomechanical computer-aided simulations having title “Virtual human bone modelling by interactive sculpting, mesh morphing and force-feedback ” has been published on the International Journal on Interactive Design and Manufacturing (IJIDeM) November 2018, Volume 12, Issue 4, pp 1223–1234. Authors: M.E.Biancolini, P.P.
- [RBF Morph Featured in the EnginSoft Newsletter, Year 15, Issue 4, Winter 2018](https://www.rbf-morph.com/rbf-morph-published-on-the-newsletter-enginsoft-year-15-n-4-winter-2018/) - The article published by RBF Morph on the NewsletterYear 15 n.4 Winter 2018 deals with a critical aspect of digital twins: the need to gain computational results in real time. Since high-fidelity CFD simulations, which have already proven to be useful in predicting the growth and evolution of CVD pathologies, require a lot of computational effort, a
- [The Presentations Given at the ANSYS Innovation User Conference 2019 Are Now Available for Download](https://www.rbf-morph.com/rbf-morph-at-the-ansys-innovation-user-conference-and-workshop-2019/) - RBF Morph took part in the ANSYS Innovation User Conference and Workshop 2019 which was held on May, 22th and 23th in Coventry (UK). Our work titled “High Performance RBF Mesh Morphing Solutions to Face Typical Aerospace Problems” presents an overview on the feature of RBF Morph and provides a set of examples of application
- [The Presentations Given at Workshop HPC for Industry 4.0@Cineca Are Now Available for Download](https://www.rbf-morph.com/rbf-morph-at-workshop-hpc-for-industry-4-0cineca/) - RBF Morph took part in the Workshop HPC for Industry 4.0@Cineca that was held in Doria Gran Hotel Milan (MI) 21-23 May, 2019. The aim of the workshop was to present state-of-the-art Industry 4.0 technologies. In particular, here were presented methods and techniques that might be used to transform a manufacturing plant into a plant 4.0. The workshop was
- [Flying Shape Sails Analysis by Radial Basis Functions Mesh Morphing](https://www.rbf-morph.com/adm-2019-international-conference/) - A study about the sailboats’ dynamic performance powered by RBF Morph technology titled "Flying shape sails analysis by Radial Basis Functions Mesh Morphing" has been presented at the ADM2019 International Conference which was held on September, 9th and 10th in Modena (IT). The selection of a high performance and lightweight material with an effective sail panel arrangement could
- [Fast High Fidelity CFD/CSM Fluid Structure Interaction Using RBF Mesh Morphing and Modal Superposition Method](https://www.rbf-morph.com/fast-high-fidelity-cfdcsm-fluid-structure-interaction-using-rbf-mesh-morphing-and-modal-superposition-method/) - An article about a fast and effective approach to tackle complex fluid structure interaction problems that are relevant for the aeronautical design having title " Fast high fidelity CFD/CSM fluid structure interaction using RBF mesh morphing and modal superposition method" has been published on the Emerald Insight, Aircraft Engineering and Aerospace Technology, vol. 91 no. 6. Authors: C. Groth, U. Cella, E.Costa,
- [Aerodynamics Optimization of a Motorglider by Using of Mesh Morphing](https://www.rbf-morph.com/aerodynamics-optimization-of-a-motorglider-by-using-of-mesh-morphing/) - The purpose of Daniela Sorani's thesis 'Aerodynamic optimization of a motorglider using mesh-morphing' was to reduce the boundary layer separation on the root of the upper surface of the Taurus (a motorglider by Pipistrel d.o.o Ajdovščina) by a modification on the fairing using mesh morphing tools. This modification improved the aerodynamics performance of the airplane.
- [Fortissimo Launches Service to Broker HPC Resources](https://www.rbf-morph.com/fortissimo-launches-service-to-broker-hpc-resources/) - Download the PDF Published in Scientific Computing World, December 2016
- [Virtual Human Bone Modelling by Interactive Sculpting, Mesh Morphing and Force-Feedback](https://www.rbf-morph.com/virtual-human-bone-modelling-by-interactive-sculpting-mesh-morphing-and-force-feedback-2/) - See the link Published in Vol. 12, Issue 4, of the International Journal on Interactive Design and Manufacturing (IJIDeM), November 2018
- [Presentations from the AIAS Conference 2019 Are Now Available for Download](https://www.rbf-morph.com/please-join-us-at-the-aias-conference-2019/) - RBF Morph took part in the 48th edition of the Italian Conference AIAS 2019 which was held on September, from 4th to 7th in Assisi (Italy). Three works about the different applications of RBF Morph technology was presented: Optimisation of industrial parts by mesh morphing enabled automatic shape sculpting In this paper we explore how the last approach can be exploited
- [RBF-Based Mesh Morphing Approach to Perform Icing Simulations in the Aviation Sector](https://www.rbf-morph.com/rbf-based-mesh-morphing-approach-to-perform-icing-simulations-in-the-aviation-sector/) - An article about a method to update the numerical mesh with ice profiles having title RBF-based mesh morphing approach to perform icing simulations in the aviation sector has been published on the Emerald Insight Aircraft Engineering and Aerospace Technology, vol. 91 no. 4. Authors: C. Groth, U. Cella, E.Costa, Marco E.Biancolini Abstract Numerical simulation of icing has become a standard. Once the
- [Testing the Potential to Offer CAE over the Cloud in the SaaS Paradigm](https://www.rbf-morph.com/testing-the-potential-to-offer-cae-over-the-cloud-in-the-saas-paradigm/) - The article published by RBF Morph on the EnginSoft Newsletter Year 16 n°2 Summer 2019 describes a fluid-structure interaction (FSI) optimization carried out for the P180 Avanti EVO vehicle, a business aircraft designed and manufactured by Piaggio Aerospace. It shows the use of an additional module for the RBF4AERO platform, rbf4aerpFSI, designed and validated to work with both
- [RBF Morph Becomes a Partner of the Spinner Project](https://www.rbf-morph.com/rbf-morph-becomes-a-partner-of-the-spinner-project/) - We are happy to announce that RBF Morph becomes a participant of the EU Spinner project as a partner organization. It is a doctoral training programme aimed at Bioengineering early stage researchers, to train bioengineers to be in a position to design the next generation of repair materials and techniques for spine surgery. SPINNER brings
- [SACMI Designs Optimized Next-Generation Components Using Automated Surface Sculpting](https://www.rbf-morph.com/sacmi-designs-optimized-next-generation-components-using-automated-surface-sculpting/) - The article published by RBF Morph on the EnginSoft Newsletter Year 16 n°3 Autumn 2019 that describes uses Adjoint and BGM shape-modification approaches for mesh morphing is now available. With automatic surface sculpting, the morphing action can be guided by the physics of the model that is being analyzed, allowing engineers to automatically identify the surface zones
- [Presentations Given at the CAE Conference 2019 Are Now Available to Download](https://www.rbf-morph.com/presentations-given-at-the-cae-conference-2019/) - The RBF Morph Team took part in the International CAE Conference 2019 which was held on October, from 28th to 29th in Vicenza (Italy). In the first speech we presented our work in collaboration with Rina Consulting titled CAE Up: digital twins at the service of manufacturing processes. Engineering fields with high technological contents involve manufacturing requirements in
- [Heart Beating Model Leverages RBF Morph Add-on for ANSYS Fluent](https://www.rbf-morph.com/heart-beating-model-thanks-rbf-morph-add-on-for-ansys-fluent/) - In the thesis titled “Preoperative planning and simulation for artificial heart implantation surgery” Sophie Collin, phd of University of Rennes, shows as it’s possible the elaboration of a heart beating model with our Add-on for ANSYS Fluent. The RBF mesh morphing can be used, with success, to warping process in order to match the meshes
- [Design an Aircraft with our Mesh Morphing Software and See How Far It Will Fly over Venice!](https://www.rbf-morph.com/fancy-a-flight/) - RBF’s mesh morphing software works with ANSYS Fluent and ANSYS Mechanical to deliver a range of multi-physics applications including Design Exploration and Digital Twins. The game was designed using Digital Twin technology to interact in real time with high fidelity Fluent CFD simulations.
- [RBF Morph at the ANSYS Worldwide Sales Conference 2020](https://www.rbf-morph.com/rbf-morph-at-ansys-worldwide-sales-conference-2020/) - As Gold Sponsor, RBF Morph participated on January 19t-22 in the ANSYS Worldwide Sales Conference 2020 promoted by ANSYS inc, the most important commercial and technological partner of our company. About 1600 people attended the event, of which: 425 sales staff and managers; over 300 directors and business partners; over 250 application engineers. At
- [The University of Rome Tor Vergata wins the Ansys Hall of Fame 2020 Using RBF Morph](https://www.rbf-morph.com/university-of-roma-tor-vergata-wins-ansys-hall-of-fame-2020/) - The University of Rome Tor Vergata is the winner of the Ansys Hall of fame 2020 world competition in Academic Session. Engineers used ANSYS Fluent, ANSYS Mechanical and RBF Morph to perform cardiovascular simulation with moving walls and applied it to the fluid–structure interaction analysis of a custom valve coupled with patient data. By bringing these simulations into the clinic, it will be possible to help doctors
- [Design News: Interview with Marco Biancolini, Founder of RBF Morph](https://www.rbf-morph.com/design-news-interview-with-marco-biancolini-founder-of-rbf-morph/) - The Design News interview with Marco Biancolini, founder of RBF Morph, offers insight into the advantages of using mesh morphing. Proper mesh morphing can lead to faster runtimes and predictions. Click here to read the interview.
- [Crack Propagation Analysis of ITER Vacuum Vessel Port Stub with Radial Basis Functions Mesh Morphing](https://www.rbf-morph.com/crack-propagation-analysis-of-iter-vacuum-vessel-port-stub-with-radial-basis-functions-mesh-morphing/) - Nuclear fusion is the field where new technologies and advanced knowledge are put into practice in order to achieve the very high performances foreseen. A very important topic in nuclear fusion design is represented by Fracture Mechanics, assuming crucial relevance in this field since a total accessibility to the structure cannot be guaranteed, thus forcing
- [RBF Morph Technology Selected by Fusion For Energy for Unlocking Innovation](https://www.rbf-morph.com/rbf-morph-technology-selected-by-fusion-for-energy-for-unlocking-innovation/) - The Analysis and Codes Group at Fusion for Energy (F4E) recently joined the Experiment n. 12 CAEUp “Update of CAE models on actual manufactured shapes” of the Cloudifacturing EU Project “Cloudification of Production Engineering for Predictive Digital Manufacturing” as a stakeholder. The Experiment CAEUp aims to implement and assess a procedure to offer manufacturing industries
- [Tools and Methodologies for Generating Digital Twins in Medical Research](https://www.rbf-morph.com/tools-and-methodologies-for-generating-digital-twins-in-medical-research/) - It’s now aviable the article published by RBF Morph on the EnginSoft Newsletter Year 17 n°2 Summer 2020 that provides a non-exhaustive overview of some of the latest advancesin the adoption of CAE technologies in the medical field by citing some ongoing EU research programs. The pervasive use of engineering simulation during the design phase and for virtual testing,
- [Automatic Shape Optimisation of Structural Parts Driven by BGM and RBF Mesh Morphing](https://www.rbf-morph.com/automatic-shape-optimisation-of-structural-parts-driven-by-bgm-and-rbf-mesh-morphing/) - A very interesting article having title Automatic shape optimisation of structural parts driven by BGM and RBF mesh morphing has been published on the International Journal of Mechanical Sciences Volume 183 - available online 25 July 2020 - Authors: S. Porziani; C. Groth; W. Waldman; M.E. Biancolini. Abstract The great flexibility of emerging production processes based on additive manufacturing is stimulating the development of automatic shape
- [Morphing onto the As Built Shapes Helps Quality Control and Makes Your Design More Robust](https://www.rbf-morph.com/morphing-onto-the-as-built-shapes-helps-quality-control-and-makes-your-design-more-robust/) - CAD and CAE model update on manufactured shapes is a key process in the industry 4.0, where design, manufacturing and maintenance are integrated elements. Digital Twin models, together with Reverse Engineering techniques, allow tracking components performances during production and verifying the compliance with design requirements during the component lifetime. The need to have RE processes
- [Learn How RBF Morph and Ansys Make the Study of Curved PCB Easy and Flexible](https://www.rbf-morph.com/learn-how-rbf-morph-makes-easy-and-flexible-the-study-of-curved-pcb/) - Over the last decade, electronic products have become increasingly complex and dense as they support more functions into dramatically reduced footprints. The need for flexible circuits has grown exponentially, since they are often the preferred solution to achieve package weight-reduction, compared to rigid planar boards. Flexible Circuit Boards are distinctly patterned circuitry and component arrangement
- [Presentations Given at Esteco UM20 Are Now Available to Download](https://www.rbf-morph.com/presentation-given-at-esteco-um20-are-now-available-to-download/) - At Esteco UM20 our CTO Marco E. Biancolini showed how advanced mesh morphing allows creating a set of shape variations which intensities can be combined to get the resulting performance together with its derivatives, thanks to the adjoint sensitivity. The computational cost (a CFD run and an adjoint one) stays the same whatever is the number
- [A Novel Formulation for the Study of the Ascending Aortic Fluid Dynamics with In Vivo Data](https://www.rbf-morph.com/a-novel-formulation-for-the-study-of-the-ascending-aortic-fluid-dynamics-with-in-vivo-data/) - An interesting article titled A Novel Formulation for the Study of the Ascending Aortic Fluid Dynamics with In Vivo Data has been published on the Medical Engineering & Physics (available online 18 September 2020). Numerical simulations to evaluate thoracic aortic hemodynamics include a computational fluid dynamic (CFD) approach or fluid-structure interaction (FSI) approach. While CFD neglects
- [Frontal Impact Performance Optimization of an Automotive Hood through Explicit Finite Element Simulations and Mesh Morphing](https://www.rbf-morph.com/frontal-impact-performance-optimization-of-an-automotive-hood-through-explicit-finite-element-simulations-and-mesh-morphing/) - In his thesis titled "Frontal Impact Performance Optimization of an Automotive Hood through Explicit Finite Element Simulations and Mesh Morphing" presented at the University of Rome Tor Vergata, Manuel Volponi focused on crash design for the bonnet of a pick-up truck. While the geometry of the vehicle was known, previous studies conducted on the bonnet
- [LESS-ICE at Spoke 6 Workshop in Pisa, Italy](https://www.rbf-morph.com/less-ice-at-spoke-6-workshop-in-pisa-italy/) - We are pleased to share that LESSICE participated in the Spoke 6 Workshop held in Pisa on February 18-19, 2025. Organized by Sapienza Università di Roma and Università di Pisa under the 𝐈𝐂𝐒𝐂 𝐈𝐭𝐚𝐥𝐢𝐚𝐧 𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡 𝐂𝐞𝐧𝐭𝐞𝐫 𝐨𝐧 𝐇𝐢𝐠𝐡-𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞 𝐂𝐨𝐦𝐩𝐮𝐭𝐢𝐧𝐠, 𝐁𝐢𝐠 𝐃𝐚𝐭𝐚, 𝐚𝐧𝐝 𝐐𝐮𝐚𝐧𝐭𝐮𝐦 𝐂𝐨𝐦𝐩𝐮𝐭𝐢𝐧𝐠, this event focused on multiscale modeling and engineering applications. During the workshop, our colleague Ubaldo Cella
- [RBF Morph Is among the Sponsors of the 36th International CAE Conference and Exhibition](https://www.rbf-morph.com/rbf-morph-to-sponsor-the-36th-international-cae-conference-and-exhibition/) - RBF Morph joined the 36th International CAE Conference and Exhibition that was held online from November 30th to December 4th 2020 and participated as a Silver Exhibitor. The theme for this year’s edition iwas “At the epicenter of the digital transformation of industry” and this virtual evolution of the event greatly highlighted this strategic role.
- [Presentations Given at BIOMA 2020 Are Now Available](https://www.rbf-morph.com/presentation-given-at-bioma-2020-are-now-available-to-download/) - BIOMA is a key conference specifically focusing on bioinspired optimisation methods and their applications. This international conference provides an opportunity to the global research community in bioinspired optimisation to discuss recent research results and develop new ideas and collaborations in a friendly and relaxed atmosphere. In the speech titled Bio-Inspired Optimization Based on BGM and
- [Two Papers about our RIBES Wing Published in ASCE's Journal](https://www.rbf-morph.com/two-companion-papers-about-our-ribes-wing-published-in-asces-journal/) - Two companion papers, summarizing the numerical/experimental activity performed within the RIBES project, have been accepted for publication in ASCE's Journal of Aerospace Engineering after a long peer review process. The first work, titled "Wind Tunnel Model Design and Aeroelastic Measurements of the RIBES Wing" recall the setup of the aeroelastic experimental campaign performed on the
- [RBF Morph at the 1st Simulation Summit](https://www.rbf-morph.com/rbf-morph-at-simulation-summit/) - We are so proud to have participated at Simulation Summit, the first independent Italian conference about CAE Simulation in the industrial field, whose goal is to promote an aware and effective use of simulation. Click here to download our presentation "Advanced radial basis function mesh morphing of RBF Morphfor LS-DYNA enabled in AnsysMechanical".
- [Analysis of Vortex-Induced Vibration of a Thermowell](https://www.rbf-morph.com/analysis-of-vortex-induced-vibration-of-a-thermowell/) - Today the need for developing multi-physics approaches in order to address modern and complex design challenges is rising. A typical multi-physics phenomenon is the interaction between a fluid and a structure, that occurs according to the following options: it can be the working principle of the considered component, it can be due to the lightweight
- [High Fidelity Fluid-Structure Interaction by Radial Basis Functions Mesh Adaption of Moving Walls: a Workflow Applied to an Aortic Valve](https://www.rbf-morph.com/high-fidelity-fluid-structure-interaction-by-radial-basis-functions-mesh-adaption-of-moving-walls-a-workflow-applied-to-an-aortic-valve/) - An interesting article titled High fidelity fluid-structure interaction by radial basis functions mesh adaption of moving walls: a workflow applied to an aortic valve has been published on the Journal of Computational Science, available online February 2021, doi: 10.1016/j.jocs.2021.101327. Abstract Fluid-Structure Interaction (FSI) can be investigated by means of non-linear Finite Element Models (FEM), suitable to
- [Optimization of a Motorcycle Component Using the Biological Growth Method](https://www.rbf-morph.com/ottimizzazione-di-un-componente-motociclistico-attraverso-il-biological-growth-method/) - The Biological Growth Method (BGM) is an efficient optimization approach suitable for the surface stress reduction in a specific mechanical component and allows us to obtain a more homogeneous stress distribution. This method mimics the way in which biological structures, such as tree trunks, bones and horns, evolve during their growth. The effectiveness of the
- [Two Studies Powered by the RBF Morph Technology at the Ansys Simulation World 2021](https://www.rbf-morph.com/ansys-simulation-world-2021/) - Ansys Simulation World 2021 is designed to inspire and educate executives, engineers, R&D and manufacturing professionals about the transformative powers of engineering simulation. This free-of-charge virtual conference will give you insights into the future of simulation with Ansys products, services, and solutions. It will give you useful information and will support you to develop the
- [A Natural Remedy for Hot-Spot Stresses](https://www.rbf-morph.com/a-natural-remedy-for-hot-spot-stresses/) - An interesting article titled A natural remedy for hot-spot stresses has been published on EnginSoft Newsletter. This paper demonstrates how the biological growth method, studied by Mattheck in the 1990s, can be easily implemented for structural shape optimization finite element method (FEM) analyses using advanced radial basis functions (RBF) mesh morphing. We use the same mechanism observed in
- [A Novel Formulation for the Study of the Ascending Aortic Fluid Dynamics with In Vivo Data](https://www.rbf-morph.com/a-novel-formulation-for-the-study-of-the-ascending-aortic-fluid-dynamics-with-in-vivo-data-2/) - An interesting article titled A novel formulation for the study of the ascending aortic fluid dynamics with in vivo data has been published on Medical Engineering & Physics Volume 91, May 2021. https://doi.org/10.1016/j.medengphy.2020.09.005 Abstract Numerical simulations to evaluate thoracic aortic hemodynamics include a computational fluid dynamic (CFD) approach or fluid-structure interaction (FSI) approach. While CFD
- [The Presentations Given at ICCS 2021 Are Now Available](https://www.rbf-morph.com/rbf-morph-at-iccs-2021/) - The International Conference on Computational Science 2021 is an annual conference that brings together researchers and scientists from mathematics and computer science as basic computing disciplines, researchers from various application areas who are pioneering computational methods in sciences such as physics, chemistry, life sciences, and engineering, as well as in arts and humanitarian fields, to
- [RBF Morph at the ESB 2021](https://www.rbf-morph.com/rbf-at-the-esb-2021/) - RBF Morph attended ESBiomech 2021. Spine Time: 12/July/2021: 11:15am-12:15pm Application of reduced order modelling techniques for stress analysis in spine fixation Sensale, L. Geronzi, M. E. Biancolini, T. Vendeuvre, M. Rochette, E. Dall'Ara Student Award Time: 12/July/2021: 3:45pm-5:00pm An image-based cfd and rbf mesh morphing approach: an alternative for standard FSI technique Capellini, E.
- [Aero Packs in Good Shape with Advanced Mesh Morphing](https://www.rbf-morph.com/aero-packs-in-good-shape-with-advanced-mesh-morphing/) - An interesting article titled Aero packs in good shape with advanced mesh morphing has been published on EnginSoft Newsletter Year 18 n°2 Summer 2021! Increasing environmental awareness has led to changes in motorsport regulations that limit the quantity of traditional and computationally intensive optimizations that can be used and encourages the use of numerical methods to improve
- [RBF Morph and optiSLang Connected to Deliver Better Products](https://www.rbf-morph.com/rbf-morph-and-optislang-combine-to-deliver-better-products/) - We are pleased to announce that in Ansys 2021 R2 we have improved and simplified the connection between RBF Morph and optiSLang. Finally the designers can assign shape parameters directly in the CAE model and then drive the optimization to identify a new design with better performances in a very short time. Our advanced mesh
- [RBF Morph at 37th International CAE Conference and Exhibition](https://www.rbf-morph.com/5502-2/) - RBF Morph was among the speakers at the 37th International CAE Conference and Exhibition on 17-19 November, 2021, in Vicenza, Italy. This hybrid event focused on the trends, technologies, issues, and how-to’s of sustainable and successful digital transformation and the key role that engineering simulation has to play in achieving the desired outcome. Energy Session
- [Reshaping the Tokamak TF Coil of DEMO with High Fidelity Multiphysics CAE and Advanced Mesh Morphing](https://www.rbf-morph.com/reshaping-the-tokamak-tf-coil-of-demo-with-high-fidelity-multi-physics-cae-and-advanced-mesh-morphing/) - In our joint work with University of Rome Tor Vergata Reshaping the Tokamak TF Coil of DEMO with high fidelity multi physics CAE and advanced mesh morphing, Corrado Groth, a researcher in Machine Design, showed the optimisation strategy adopted for the TF coils of the ADCs, searching for the best compromise between electromagnetic (EM) and
- [RBF Morph at the CAE Conference 2021](https://www.rbf-morph.com/cae-conference-2021-it-was-a-great-success-for-our-rbf-morph/) - Our participation to the last CAE Conference held in November 17-19, 2021, at Vicenza, Italy, was a success. The participants had the chance to interact with our executive, development and service staff to share, discuss and figure out new mesh morphing-driven solutions for their CAE processes with the vision of future developments toward workflow integration and
- [Using High-Fidelity FSI Simulation and Advanced Mesh Morphing to Simulate and Mitigate Vortex-Induced Vibrations](https://www.rbf-morph.com/using-high-fidelity-fsi-simulation-and-advanced-mesh-morphing-to-simulate-and-mitigate-vortex-induced-vibrations/) - We are on the EnginSoft Newsletter Year 18 n.4 Winter! Our study Using high-fidelity FSI simulation and advanced mesh morphing to simulate and mitigate vortex-induced Vibrations discusses the complex and challenging problem of controlling vortex-induced vibrations (VIV). The fluid structure interactions (FSI) involved pose two types of problems: firstly, structural and fluid analysis skills are required
- [RBF Morph at the World Congress of Biomechanics 2022](https://www.rbf-morph.com/world-congress-of-biomechanics-2022/) - As a partner of the COPERNICUS project (FF4EuroHPC), RBF Morph attended the 9th World Congress of Biomechanics 2022 (WCB 2022) at Taipei International Convention Center, Taipei, Taiwan, from July 10 to 14, 2022. The Modified Blalock Taussig Shunt (mBTS) is one of the most common palliative operations in case of cyanotic heart diseases. To date,
- [A Digital Twin of an Operating Theater](https://www.rbf-morph.com/a-digital-twin-of-an-operating-theater/) - RBF Morph team shared a study at the event Summer School on Reduced Order Methods in Computational Fluid Dynamics. It is is an example of the possible use of the Reduced Order Model (ROM) in air quality management in an operating theater. We presented a steady-state CFD (Computer Fluid Dynamics) simulation with the aim of
- [RBF Morph at the 51st AIAS Conference](https://www.rbf-morph.com/rbf-morph-at-51-aias-conference/) - The 2022 edition of the AIAS Conference took place at the University of Padu, Italy, on 7 September, 2022. This year RBF Morph presented three interesting works about different applications of the RBF Morph technology. Mechanical Design Session Wednesday, September 7, 2022 The preliminary thermo-mechanical design, simulation and optimization, of LAD onboard the eXTP
- [RBF Morph at the VPH 2022 Conference](https://www.rbf-morph.com/rbf-morph-at-the-vph-2022-conference/) - RBF Morph attended the VPH2022 conference which took place in Porto, Portugal, from 6 to 9 September, 2022. The VPH2022 conference focused on: "Virtual bodies for treatment development and clinical trials" and touched the following main topics: Machine learning, big data and artificial intelligence Translation from in silico to clinical Computational biology and evolutionary genomics
- [Digital Twins and Medicine 4.0: from In Silico Simulations to Patient-Specific Solutions](https://www.rbf-morph.com/digital-twins-and-medicine-4-0-from-in-silico-simulations-to-patient-specific-solutions/) - The University of Sydney, one of the partners of the MeDiTATe project, hosted the workshop Heart Valve Replacements: Past, Present, and Future Directions on September 27, 2022. The meeting was organized by The School of Chemical and Biomolecular Engineering and the School of Medicine. The aim of the group is to bring a better valve to
- [RBF Morph at Ansys Level Up 3.0](https://www.rbf-morph.com/ansys-level-up-3-0/) - Our founder, Marco E. Biancolini, was among the speakers at the Ansys Level Up 3.0. In the Mechanical track he gave an overview and a hands-on of our RBF Morph Structures: "Make FEA more Flexible with Mesh Morphing". Mechanical track information: Tuesday, October 25, 2022 8.30 PM a 9.00 PM. In this webinar, you learned:
- [RBF Morph at the 38th CAE Conference](https://www.rbf-morph.com/rbf-morph-at-38th-cae-conference/) - We participated as a sponsors in the 38th International CAE Conference. The event was divided into two separate and complementary initiatives: 16-17 November was dedicated to software technology producers, each of which had a channel to host their own symposium and to present particularly significant experiences or case studies online; 18 November was held, by
- [Aerodynamic Optimization of a MotoGP Motorcycle Using CFD and Mesh Morphing](https://www.rbf-morph.com/aerodynamic-optimization-of-a-motogp-motorcycle-using-cfd-and-mesh-morphing/) - The thesis "Aerodynamic Optimization of a MotoGP Motorcycle Using CFD and Mesh Morphing" by Filippo Ricci delves deep into the world of fluid dynamics, focusing on the aerodynamic analysis and optimization of a MotoGP motorcycle, employing the cutting-edge techniques of Computational Fluid Dynamics (CFD) and Mesh Morphing. The primary objectives of this research are two-fold:
- [Our paper presented at the 14th LS-DYNA Conference is now on the dynalook.com website](https://www.rbf-morph.com/our-paper-presented-at-the-14th-ls-dyna-conference-is-now-on-the-dynalook-com-website/) - Exciting news to share! The 2023 proceedings have been unveiled on https://www.dynalook.com/, showcasing an impressive archive of over a hundred research papers. Our contribution to this repository is the paper titled “Reduced Order Model for Enhanced EVAR Planning and Navigation Guidance" Endovascular Aneurysm Repair (EVAR) is a revolutionary minimally invasive technique for treating abdominal aortic
- [Fluid Dynamics of Exhaust Manifolds for Internal Combustion Engines](https://www.rbf-morph.com/fluid-dynamics-of-exhaust-manifolds-for-internal-combustion-engines/) - The thesis "Fluid Dynamics of Exhaust Manifolds for Internal Combustion Engines. Analysis and Optimization of Geometry through a Numerical Approach Based on a Mesh Morphing Algorithm' by Walter Savastano focuses on the parametric analysis of a manifold exhaust system for a four-cylinder internal combustion engine using a model provided by Ansys UK. The goal was
- [Structural Analysis of the Hub of a Rental Kart and Optimization through Mesh Morphing](https://www.rbf-morph.com/structural-analysis-of-the-hub-of-a-rental-kart-and-optimization-through-mesh-morphing/) - In his thesis titled "Structural Analysis of the Hub of a Rental Kart and Optimization through Mesh Morphing" Lorenzo Mazzaferro collaborated with one of the leading companies in Kart production, CRG. This company boasts an impressive clientele, including renowned Formula 1 drivers such as Michael Schumacher and Lewis Hamilton. Lorenzo was tasked by CRG to
- [Goal Driven Multi-Objective Shape Optimization for Conjugate Heat Transfer in an Effusion Cooling System of a Combustion Chamber, through a CFD-Mesh-Morphing-Based Approach](https://www.rbf-morph.com/goal-driven-multi-objective-shape-optimization-for-conjugate-heat-transfer-in-an-effusion-cooling-system-of-a-combustion-chamber-through-a-cfd-mesh-morphing-based-approach/) - In his thesis "Goal Driven Multi-Objective Shape Optimization for Conjugate Heat Transfer in an Effusion Cooling System of a Combustion Chamber, through a CFD-Mesh-Morphing-Based Approach" Walter Savastano conducted numerical investigations to optimize the effectiveness of full coverage effusion cooling through computational fluid dynamics (CFD). The study examined the impact of hole density and injection angle
- [Optimization of Sail Settings Using RBF Mesh Morphing](https://www.rbf-morph.com/optimization-of-sail-settings-using-rbf-mesh-morphing/) - In his thesis 'Optimization of Sail Settings Using RBF Mesh Morphing,' Saverio Ramirez explored the application of mesh morphing in the field of sailing. The purpose of this project was to present the latest results achieved through the ongoing collaboration between the University of Rome Tor Vergata and the Yacht and Superyacht Research Group at
- [Analysis of Vortex Induced Vibration of a Thermowell by High Fidelity FSI Numerical Analysis Based on RBF Structural Modes Embedding](https://www.rbf-morph.com/analysis-of-vortex-induced-vibration-of-a-thermowell-by-high-fidelity-fsi-numerical-analysis-based-on-rbf-structural-modes-embedding/) - Here’s a new thesis by Alessandro Felici, Università di Roma Tor Vergata, using our RBF Morph software. His study, "Analysis of Vortex Induced Vibration of a Thermowell by High Fidelity FSI Numerical Analysis Based on RBF Structural Modes Embedding", focuses on the numerical analysis of fluid-structure interaction (FSI) involving a thermowell submerged in a water
- [Optimization of the Shape of a Helical Spring Using the Biological Growth Method](https://www.rbf-morph.com/optimization-of-the-shape-of-a-helical-spring-using-the-biological-growth-method/) - We are proud to present another thesis leveraging our RBF Morph software together with Ansys Workbench: ‘Optimization of the Shape of a Helical Spring Using the Biological Growth Method’ by Emanuele Lombardi, an Engineering student at Università di Roma Tor Vergata. The Biological Growth Method (BGM) has proven to be highly effective in facilitating structural
- [Evaluation of ‘As Built’ Performance of Mechanical Components Using Mesh Morphing Techniques](https://www.rbf-morph.com/evaluation-of-as-built-performance-of-mechanical-components-using-mesh-morphing-techniques/) - We are happy to share another interesting thesis that leverages our software discussed by an Engineering student at University of Rome Tor Vergata. In Francesco Scarpitta’s thesis, “Evaluation of ‘As Built’ Performance of Mechanical Components Using Mesh Morphing Techniques,” the focus was directed towards devising innovative methodologies to ascertain the influence of shape error on
- [Optimization Methods for External and Internal Flows Using CFD Adjoint and Mesh Morphing](https://www.rbf-morph.com/optimization-of-external-and-internal-flows-using-adjoint-cfd-and-mesh-morphing-methods/) - For Andrea Lopez's thesis on 'Optimization Methods for External and Internal Flows Using CFD Adjoint and Mesh Morphing,' two workflows were developed: 'Adjoint-sculpting' and 'Adjoint-preview.' Adjoint-sculpting is parameterless, leveraging the adjoint method to identify new shapes, while Adjoint-preview requires user-defined parameters, and adjoint is used to drive optimization and identify the optimum solution. These two
- [Aerodynamic Optimization of a Rear Camera through CFD Analysis and Mesh Morphing](https://www.rbf-morph.com/optimization-of-the-aerodynamics-of-a-rear-camera-through-cfd-analysis-and-mesh-morphing/) - Dive into the world of aerodynamics with Lorenzo D’Anastasio’s groundbreaking thesis: “Optimization of the Aerodynamics of a Rear Camera through CFD Analysis and Mesh Morphing.”
- [Towards Digital Twin Technologies for Ascending Aortic Aneurysm Growth Prediction and Real-Time Diagnosis](https://www.rbf-morph.com/towards-digital-twin-technologies-for-ascending-aortic-aneurysm-growth-prediction-and-real-time-diagnosis/) - We are very proud to announce the publication of our colleague Leonardo Geronzi’s doctoral thesis, “Towards Digital Twin Technologies for Ascending Aortic Aneurysm Growth Prediction and Real-Time Diagnosis.”
- [Innovative Computational Tools for Enhancing Cardiovascular Surgery Outcomes](https://www.rbf-morph.com/innovative-computational-tools-for-enhancing-cardiovascular-surgery-outcomes/) - We are proud to present here Eirini Kardampiki’s doctoral thesis “Development of Computational Tools for Cardiovascular Applications,” discussed at the University of Rome Tor Vergata. This research develops computational tools to support cardiovascular surgeries, specifically Endovascular Aneurysm Repair (EVAR) and the modified Blalock–Taussig shunt (MBTS).
- [Computational Methods for the Analysis of Ascending Aortic Aneurysms](https://www.rbf-morph.com/computational-methods-for-the-analysis-of-ascending-aortic-aneurysms/) - We are excited to share a very interesting thesis by Antonio Martinez presented at the University of Rome Tor Vergata and titled “Computational Methods for the Analysis of Ascending Aortic Aneurysms”.
- [Unlocking Aircraft Performance: Parametric CAD and Mesh Morphing Techniques](https://www.rbf-morph.com/unlocking-aircraft-performance-parametric-cad-and-mesh-morphing-techniques/) - We are thrilled to bring to your attention another outstanding thesis leveraging the power of our RBF Morph software. On December 5, 2023.Gianluca Magrì successfully defended his thesis titled “Aerodynamic Optimization of an Aircraft Using Parametric CAD and Mesh Morphing” at the University of Padova, Italy,
- [𝐑𝐎𝐌𝐞𝐝2𝐕𝐑 𝐚𝐭 𝐭𝐡𝐞 𝐑𝐢𝐮𝐧𝐢𝐨𝐧𝐞 𝐏𝐥𝐞𝐧𝐚𝐫𝐢𝐚 𝐒𝐩𝐨𝐤𝐞 9 𝐢𝐍𝐄𝐒𝐓 – 𝐀𝐝𝐯𝐚𝐧𝐜𝐢𝐧𝐠 𝐌𝐞𝐝𝐢𝐜𝐚𝐥 𝐃𝐢𝐠𝐢𝐭𝐚𝐥 𝐓𝐰𝐢𝐧𝐬 𝐰𝐢𝐭𝐡 𝐕𝐑](https://www.rbf-morph.com/𝐑𝐎𝐌𝐞𝐝2𝐕𝐑-𝐚𝐭-𝐭𝐡𝐞-𝐑𝐢𝐮𝐧/) - On February 13, 2025, at SISSA, Trieste (Italy), the ROMed2VR team showcased their innovative work at the Riunione Plenaria Spoke 9 iNEST. This event highlighted the projects selected under the “Bandi a Cascata Spoke 9”, bringing together key players in medical simulation, computational modeling, and virtual reality. Representing InSilicoTrials, Vincenzo Carbone, PhD presented how Reduced Order
- [Advancing Pre-Surgical Planning with ROMed2VR: RBF Morph’s Role in Integrating ROMs and Virtual Reality](https://www.rbf-morph.com/advancing-pre-surgical-planning-with-romed2vr-rbf-morphs-role-in-integrating-roms-and-virtual-reality/) - RBF Morph is proud to participate in ROMed2VR, a research initiative focused on enhancing pre-surgical planning for congenital heart defects through the integration of Computational Fluid Dynamics (CFD) and Virtual Reality (VR). The project aims to develop an advanced computational framework that combines open-source CFD with Reduced Order Models (ROM) to improve the accuracy and
- [Exploring the Future of CAE: Marco E. Biancolini's Exclusive Interview on MCADCafe](https://www.rbf-morph.com/exploring-the-future-of-cae-marco-evangelos-biancolinis-exclusive-interview-on-mcadcafe/) - We are glad to announce an exclusive feature on MCADCafe.com, where our founder, Marco Evangelos Biancolini, shares his insights into the future of Computer-Aided Engineering (CAE) and the trends shaping the industry as we move into 2025. In the interview, Biancolini underscores the transformative impact of artificial intelligence (AI) and advanced computational technologies on CAE.
- [RBF Morph: Digital Twin and Simulation Serving Automotive, Aerospace, Naval, Medical Sectors, and More](https://www.rbf-morph.com/rbf-morph-digital-twin-and-simulation-serving-automotive-aerospace-naval-medical-sectors-and-more/) - An interview with Marco Evangelos Biancolini, founder of RBF Morph and professor of machine design at the University of Tor Vergata in Rome, to discover how the company's digital twins support industries such as motorsports, aerospace, and healthcare. Digital twins and simulations are key topics in many industrial sectors, starting with the world of automotive
- [Digital Twin for Medicine: The Remarkable Case of Aortic Aneurysm](https://www.rbf-morph.com/digital-twin-for-medicine-the-remarkable-case-of-aortic-aneurysm/) - A hemodynamic testbed, using 3D printing and ultrasound, replicates the physiological and pathological conditions of those with an aortic aneurysm: we explored the prospects of the digital twin with Marco Evangelos Biancolini, coordinator of the EU Meditate project. Building physical and digital twins of the circulatory system is no longer science fiction: by combining 3D
- [RBF Morph webinar for Avicenna Alliance](https://www.rbf-morph.com/rbf-morph-webinar-for-avicenna-alliance/) - Use this link to download the presentation: Enabling the Medical Digital Twin by Advanced Mesh Morphing and High-Fidelity Patient-Specific Simulations
- [Revolutionizing Healthcare: Our First Webinar Hosted by Avicenna Alliance Explores Advanced Mesh Morphing and High Fidelity Patient-Specific Simulations](https://www.rbf-morph.com/revolutionizing-healthcare-our-first-webinar-hosted-by-avicenna-alliance-explores-advanced-mesh-morphing-and-high-fidelity-patient-specific-simulations/) - In a webinar held on March 5, 2024, we delved into the future of healthcare, exploring the potential of “Enabling the Medical Digital Twin by Advanced Mesh Morphing and High Fidelity Patient-Specific Simulations.” Hosted by Avicenna Alliance, the event provided a comprehensive overview of the in-silico approach in healthcare applications, led by our founder, Dr. Marco Evangelos Biancolini.
- [Cutting-Edge Methodology for Aerodynamic Helmet Design Published in MDPI](https://www.rbf-morph.com/cutting-edge-methodology-for-aerodynamic-helmet-design-published-in-mdpi/) - We are pleased to announce the latest research from the University of Rome Tor Vergata, which leverages RBF Morph technology for groundbreaking advancements in sports aerodynamics. The paper, titled "Reduced-Order Model of a Time-Trial Cyclist Helmet for Aerodynamic Optimization Through Mesh Morphing and Enhanced with Real-Time Interactive Visualization", is now published in MDPI. This collaboration
- [RBF Morph Highlights at "Tecnologie e Sostenibilità: Nuove Frontiere per Scienza, Medicina e Industria" Event](https://www.rbf-morph.com/rbf-morph-highlights-at-tecnologie-e-sostenibilita-nuove-frontiere-per-scienza-medicina-e-industria-event/) - RBF Morph is delighted to share the success of our participation in the prestigious event "Tecnologie e Sostenibilità: Nuove Frontiere per Scienza, Medicina e Industria," organized by Rome Technopole as part of the Roma Fotografia – Future 2024 exhibition. When: Thursday, December 5, 2024 Where: Palazzo Massimo – Museo Nazionale Romano, Rome Our founder, Marco
- [Structural Optimization of Thermal Turbine Blade Roots Using the Biological Growth Method](https://www.rbf-morph.com/structural-optimization-of-thermal-turbine-blade-roots-using-the-biological-growth-method/) - The thesis Structural Shape Optimization Using BGM at the Root of Thermal Turbine Blades, presented by Simone Putzu at the University of Rome Tor Vergata, provides a rigorous exploration of innovative methodologies for structural optimization. Focused on axial turbine blade roots, the work integrates advanced computational tools and methodologies to enhance the mechanical performance of
- [𝐑𝐁𝐅 𝐌𝐨𝐫𝐩𝐡 𝐟𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐢𝐧 𝐀𝐮𝐭𝐨𝐦𝐚𝐳𝐢𝐨𝐧𝐞 𝐎𝐠𝐠𝐢](https://www.rbf-morph.com/𝐑𝐁𝐅-𝐌𝐨𝐫𝐩𝐡-𝐟𝐞𝐚𝐭𝐮𝐫𝐞𝐝/) - This month, Marco Evangelos Biancolini, the founder of RBF Morph, has authored an in-depth article for Automazione Oggi, a premier publication in the field of industrial software solutions. The article explores how advanced simulation methodologies, high-fidelity CAE modeling, and real-time optimization can effectively address complex shape optimization challenges in product design. Leveraging the capabilities of
- [Advancing Rotor Design: RBF Morph Technology Optimizes Roots Blowers](https://www.rbf-morph.com/advancing-rotor-design-new-study-highlights-rbf-morph-technology-in-roots-blower-optimization/) - We are pleased to share a newly published study highlighting the capabilities of RBF Morph technology, now available in Purdue University’s online repository. Titled "Shape optimization of a Roots blower rotor profile using CFD model with a coupled Adjoint-Sculpting method," the research explores innovative methods for enhancing the performance of rotary positive displacement machines. Authored
- [CADFEM Conference 2024](https://www.rbf-morph.com/cadfem-conference-2024/) - Use the link below to download the presentation: Presentation: Complete Solution for Delivering Interactive Digital Twins with Custom AR/VR UI
- [Innovative Aircraft Design with DigiPAD: Insights from Tech Transfer Day](https://www.rbf-morph.com/innovative-aircraft-design-with-digipad-insights-from-tech-transfer-day/) - On November 14, the University of Rome Tor Vergata hosted Tech Transfer Day, where RBF Morph had a chance to showcase a dedicated booth highlighting the DigiPAD project. DigiPAD (Digital Twin for Advanced Design in the Aerospace Industry) is an innovative initiative designed to revolutionize the aircraft design process. The project brings together two cutting-edge
- [We Are Part of THUMS User Meeting 2024](https://www.rbf-morph.com/we-are-part-of-thums-user-meeting-2024/) - We’re pleased to be part of the THUMS User Meeting 2024. During the event, our colleague, Emanuele Di Meo, will present "Human Body Models Customization by Advanced Mesh Morphing: Parametric THUMS." Emanuele will discuss how advanced mesh morphing techniques are being used to customize human body models, with a focus on their applications in biomechanics
- [Our Founder Featured in an Insightful Episode of Kade Beck's Popular Podcast](https://www.rbf-morph.com/our-founder-featured-in-an-insightful-episode-of-kade-becks-popular-podcast/) - Discover the future of CFD and digital twin technology in an inspiring episode of How to Become a CFD Engineer! In this in-depth conversation, Kade Beck sits down with our founder, Marco Evangelos Biancolini, to explore the power of mesh morphing and its groundbreaking applications. In this episode, you’ll learn all about mesh morphing—what it
- [Advanced Optimization of the WT Model of the RIBES Project](https://www.rbf-morph.com/advanced-optimization-of-the-wt-model-of-the-ribes-project/) - We're happy to introduce another remarkable thesis leveraging RBF Morph technology: "Advanced Optimization of the WT Model of the RIBES Project" by Domiziano Beltramme. This thesis develops a fully automated DOE (Design of Experiment) program aimed at structural optimization, built to support the wind tunnel (WT) model for the RIBES project. From the setup of
- [Hardware Upgrade Interview on RBF Morph’s Digital Twin and Simulation Revolution](https://www.rbf-morph.com/hardware-upgrade-interview-marco-biancolini-on-rbf-morphs-digital-twin-and-simulation-revolution/) - Check out the fascinating interview with Marco Evangelos Biancolini, founder of RBF Morph, featured on Hardware Upgrade, titled "RBF Morph: Digital Twin and Simulation at the Service of Automotive, Aerospace, Naval, Medical, and More". In this in-depth conversation, Biancolini delves into how RBF Morph’s cutting-edge digital twin technology is revolutionizing industries such as motorsport, aerospace,
- [Exclusive Wired Interview: Our Founder Unveils the Future of Medical Digital Twins](https://www.rbf-morph.com/exclusive-wired-interview-our-founder-unveils-the-future-of-medical-digital-twins/) - We are thrilled to announce that Wired Italia has just published a fantastic interview featuring our founder, Marco Evangelos Biancolini, who dives deep into the future of medical digital twins and the groundbreaking work being done as part of the EU-funded MeDiTATe project. In this exclusive interview, Marco shares insights into how RBF Morph is
- [Innovating automotive with RBF Morph's software: a case study](https://www.rbf-morph.com/innovating-automotive-a-case-study/) - We are excited to share a new case study showcasing the power of RBF Morph in the automotive industry. Dr. Kevin Cremanns from PI Probaligence GmbH and Emanuele Di Meo, a CAE Senior Engineer from RBF Morph, collaborated to explore predictive capabilities for automotive body pressure using advanced simulations. The study involved analyzing 51 design
- [Go-Kart Aerodynamic Optimization by RBF Mesh Morphing](https://www.rbf-morph.com/go-kart-aerodynamic-optimization-by-rbf-mesh-morphing/) - We are happy to share a thesis by Carlo Del Bene and Ruben Anello from the University of Rome Tor Vergata: "Go-kart aerodynamic optimization by means of CFD and RBF Mesh Morphing." The study introduces a novel computational approach to enhance go-kart performance by focusing on aerodynamic efficiency. Leveraging Computational Fluid Dynamics (CFD) in conjunction
- [RBF Morph at the CADFEM Ansys Simulation Conference Lyon 2023](https://www.rbf-morph.com/ansys_simulation_conference_lyon_2023/) - We are participating in the second edition of the CADFEM Ansys Simulation Conference in Lyon, France, on June 8, 2023. The venue is the Veolia campus in Jonage (69). Attending the event means joining the first community of digital simulation fans in France. CADFEM will meet all Ansys' users at the Simulation Conference. During this
- [Improving Vehicular Safety: Customizing Human Body Models through Advanced Mesh Morphing](https://www.rbf-morph.com/improving-vehicular-safety-customizing-human-body-models-through-advanced-mesh-morphing/) - Finite Element Human Body Models (FE HBMs) have emerged as indispensable tools in the realm of vehicular safety research and design.
- [RBF Morph at ICAS 2024 Congress](https://www.rbf-morph.com/rbf-morph-to-present-groundbreaking-research-at-the-24th-icas-congress/) - RBF Morph participated in the 24th International Council of the Aeronautical Sciences (ICAS) Congress, on September 9-13, 2024, in Florence, Italy. Founded in 1957 by Professor Theodore von Kármán, the ICAS Congress is a cornerstone event for the global aerospace community. It serves as a vital platform where professionals, companies, and institutions converge to exchange
- [The 2024 Nordic Innovation Conference](https://www.rbf-morph.com/rbf-morph-to-participate-in-the-2024-nordic-innovation-conference-in-gothenburg-sweden/) - RBF Morph attended the 2024 Nordic Innovation Conference in Gothenburg, Sweden, on October 1, 2024. Hosted by our partner Ansys, this year’s event was a groundbreaking experience featuring sessions with industry-leading speakers. Attendees had the opportunity to gain inspiration from top industry leaders, exploring how Ansys simulation technology is transforming industries. The event provided cutting-edge
- [RBF Morph at SOFT 2024](https://www.rbf-morph.com/rbf-morph-to-participate-in-soft-2024/) - RBF Morph participated in the 33rd Symposium on Fusion Technology (SOFT 2024), that took place in Dublin, Ireland, on September 22-27, 2024. Organized by Dublin City University and the National Centre for Plasma, Science and Technology, this biennial event is the premier conference in the field of fusion technology in Europe. SOFT brings together scientists,
- [Our paper published by Springer](https://www.rbf-morph.com/our-paper-published-by-springer/) - We are excited to share that our paper, "Human Body Models Customization by Advanced Mesh Morphing: Parametric THUMS," is now available in the book Engineering Methodologies for Medicine and Sports, published by Springer. Authored by Emanuele Di Meo, Emanuele Lombardi, Andrea Lopez, and Marco Evangelos Biancolini, this work delves into a cutting-edge approach to customizing
- [RBF Morph Powers Prosthetic Fabrication](https://www.rbf-morph.com/rbf-morph-powers-prosthetic-fabrication/) - We are pleased to announce the publication of an important work in MDPI titled "Prosthetist-Specific Rectification Templates Based on Artificial Intelligence for the Digital Fabrication of Custom Transtibial Sockets." The study, authored by Andrea Giovanni Cutti, Maria Grazia Santi, Andrew H. Hansen, Stefania Fatone, and the Residual Limb Shape Capture Group, represents a significant advancement
- [New article published in Futurities](https://www.rbf-morph.com/new-article-published-in-futurities-3/) - Futurities, the EnginSoft magazine, has recently featured our FF4EuroHPC project DiTAiD in their latest article: ‘A digital twin of airflow and inhaled drug delivery in a human airway’. Respiratory diseases like asthma and chronic obstructive pulmonary disease (COPD) arise when human airways narrow. The conventional medical approach involves patients inhaling drug particles, but uneven distribution
- [Our Study ‘A Parametric 3D Model of Human Airways for Particle Drug Delivery and Deposition’ published in MDPI](https://www.rbf-morph.com/our-study-a-parametric-3d-model-of-human-airways-for-particle-drug-delivery-and-deposition-published-in-mdpi/) - A paper titled “A Parametric 3D Model of Human Airways for Particle Drug Delivery and Deposition” has just been published in MDPI’s Special Issue on Radial Basis Functions and their Applications in Fluids. Led by Leonardo Geronzi and Benigno Marco Fanni, alongside an esteemed group of co-authors from RBF Morph, the University of Rome Tor Vergata,
- [Unlocking Innovation: Webinar on FEA and CFD Mesh Morphing with Ansys RBF Morph](https://www.rbf-morph.com/unlocking-innovation-webinar-on-fea-and-cfd-mesh-morphing-with-ansys-rbf-morph/) - In the realm of simulation technology, staying ahead is the key to unlocking unprecedented efficiency and optimization. We are thrilled to announce our webinar on “FEA and CFD Mesh Morphing with Ansys RBF Morph” scheduled for Wednesday, February 21, 2024, from 10:00 am to 11:00 am GMT. Hosted by Dr. Marco Evangelos Biancolini, the Chief
- [Unlocking Innovation: Webinar on FEA and CFD Mesh Morphing with Ansys RBF Morph](https://www.rbf-morph.com/__trashed-3/) - In the realm of simulation technology, staying ahead is the key to unlocking unprecedented efficiency and optimization. We are thrilled to announce our webinar on “FEA and CFD Mesh Morphing with Ansys RBF Morph” scheduled for Wednesday, February 21, 2024, from 10:00 am to 11:00 am GMT. Hosted by Dr. Marco Evangelos Biancolini, the Chief
- [Use of RBF Morph mesh morphing for the estimation of airfoil performances in presence of ice profiles](https://www.rbf-morph.com/use-of-rbf-morph-mesh-morphing-for-the-estimation-of-airfoil-performances-in-presence-of-ice-profiles-presentations/) - Use the links below to download: UGM 2013 paper “Aircraft design optimization” UGM 2013 paper:“Airfoil performances ice profile” Icing Image ANSYS User Group Meeting Italia (UGM 2013) June 2013 I Salsomaggiore Terme, Parma I English
- [RBF Morph Expands Focus on Medical Sector and Sponsors XIII Annual ESB-ITA Meeting](https://www.rbf-morph.com/rbf-morph-expands-focus-on-medical-sector-and-sponsors-xiii-annual-esb-ita-meeting/) - We are excited to announce that RBF Morph is broadening its focus within the medical sector, furthering our dedication to revolutionizing personalized medicine. As part of this initiative, RBF Morph is proud to sponsor the XIII Annual Meeting of the Italian Chapter of the European Society of Biomechanics (ESB-ITA), taking place in Pescara, Italy, on
- [RBF Morph at AIAS 2024 Conference in Naples, Italy](https://www.rbf-morph.com/rbf-morph-at-aias-2024-conference-in-naples-italy/) - RBF Morph proudly participated in the prestigious AIAS 2024 Conference, held in Naples, Italy. This highly regarded event, organized by the Università degli Studi di Napoli Federico II, Università degli Studi della Campania "Luigi Vanvitelli," and Università degli Studi di Salerno, brought together Professors, Researchers, PhD students, and engineers from around the world to explore the latest advancements in stress analysis and mechanical design.
- [Advancing Surgical Precision: New Research on Patient-Specific Support for Abdominal Aortic Aneurysm Treatment](https://www.rbf-morph.com/advancing-surgical-precision-new-research-on-patient-specific-support-for-abdominal-aortic-aneurysm-treatment/) - We are pleased to announce a significant milestone in our collaborative efforts under the EU-funded MeDiTATe project. Our research team has successfully published a new paper titled "Towards a Reduced Order Model for EVAR Planning and Intra-Operative Navigation" in the esteemed journal Medical Engineering & Physics. This groundbreaking study presents an innovative workflow designed to
- [Advancing the Fatigue Life of Complex Mechanical Components through Automated Shape Optimization: A Thesis by Stefano Benacquista](https://www.rbf-morph.com/advancing-the-fatigue-life-of-complex-mechanical-components-through-automated-shape-optimization-a-thesis-by-stefano-benacquista/) - The use of RBF Morph software was instrumental in this research. RBF Morph, renowned for its efficiency in shape optimization and structural analysis, enabled precise control over the geometric modifications necessary to mitigate stress concentrations.
- [Highlights from the CADFEM Conference 2024 in Rapperswil](https://www.rbf-morph.com/highlights-from-the-cafdem-conference-2024-in-rapperswil/) - We are thrilled to share the highlights of the recently concluded CADFEM Conference in Rapperswil, Switzerland! On June 20, 2024, this unique event, focused on simulation, brought together industry professionals and simulation enthusiasts for an inspiring gathering.
- [Store Separation: Theoretical Investigation of Wing Aeroelastic Response](https://www.rbf-morph.com/store-separation-theoretical-investigation-of-wing-aeroelastic-response/) - Use the links below to download: Presentation: “Store Separation: Theoretical Investigation of Wing Aeroelastic Response” 4th Aircraft Structural Design Conference 2014 October 2014 I Queen’s University Belfast I English
- [Optimization of wing efficiency vs. sweep angles using mesh morphing](https://www.rbf-morph.com/optimization-of-wing-efficiency-vs-sweep-angles-using-mesh-morphing/) - Use the links below to download: Paper: “Optimization of wing efficiency vs. sweep angles using mesh morphing” International CAE Conference 2012 October 2012 I Lazise Verona, Italy I English
- [A Mesh Morphing Based Technique To Efficiently Perform FSI Analyses For Aeroelastic Design Applications](https://www.rbf-morph.com/a-mesh-morphing-based-technique-to-efficiently-perform-fsi-analyses-for-aeroelastic-design-applications/) - Use the links below to download: Paper: “A Mesh Morphing Based Technique To Efficiently Perform FSI Analyses For Aeroelastic Design Applications” Italian Association of Aeronautics and Astronautics XXII Conference (A.I.D.A.A 2013) September 2013 I Napoli Italy I English
- [Optimization under Uncertainty using Adjoint Solver and RBF Morph](https://www.rbf-morph.com/optimization-under-uncertainty-using-adjoint-solver-and-rbf-morph/) - Use the links below to download: Paper: “Optimization under Uncertainty using Adjoint Solver and RBF Morph” 10th International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control (EUROGEN 2013) Ocotber 2013 I Las Palmas de Gran Canaria, Spain I English
- [Advanced Mesh Morphing for Automotive Applications using RBF Morph](https://www.rbf-morph.com/advanced-mesh-morphing-for-automotive-applications-using-rbf-morph/) - Use the links below to download: Paper: “Advanced Mesh Morphing for Automotive Applications using RBF Morph“ ANSYS Automotive Simulation World Congress (ASWC 2013) October 2013 I Frankfurt Germany I English
- [RBF Morph software How to reshape the CAE workflows by Radial Basis Functions mesh morphing](https://www.rbf-morph.com/rbf-morph-software-how-to-reshape-the-cae-workflows-by-radial-basis-functions-mesh-morphing/) - Use the links below to download: ANSYS Brazilian UGM 2014 – Presentation 1 ANSYS Brazilian UGM 2014 – Presentation 2 ANSYS User Group Meeting Brazil (UGM 2014) May 2014 I Sao Paulo, Brazil I English
- [How to boost Fluent adjoint using RBF Morph mesh morphing](https://www.rbf-morph.com/how-to-boost-fluent-adjoint-using-rbf-morph-mesh-morphing/) - Use the links below to download: ANSYS Italian UGM 2014 – Presentation 1 ANSYS Italian UGM 2014 – Presentation 2 ANSYS User Group Meeting Italia (UGM 2015) May 2014 I Sesto San Giovanni, Milano, Italy I English
- [Virtual test bench for hemodynamic evaluation of aortic cannulation in cardiopulmonary bypass](https://www.rbf-morph.com/virtual-test-bench-for-hemodynamic-evaluation-of-aortic-cannulation-in-cardiopulmonary-bypass/) - Use the links below to download: Paper: “Virtual test bench for hemodynamic evaluation of aortic cannulation in cardiopulmonary bypass” 11th World Congress on Computational Mechanics 2014 July 2014, Barcelona, Spain I English
- [An Efficient Approach to Simulating Ice Accretion on 2D and 3D Airfoils](https://www.rbf-morph.com/an-efficient-approach-to-simulating-ice-accretion-on-2d-and-3d-airfoils/) - Use the links below to download: Paper: “An Efficient Approach to Simulating Ice Accretion on 2D and 3D Airfoils“ Advanced Aero Concepts, Design and Operations Conference 2014 July 2014 I Bristol, UK I English
- [RBF Morph software External Aerodynamic Optimization Using ANSYS Mesh Morphing](https://www.rbf-morph.com/rbf-morph-software-external-aerodynamic-optimization-using-ansys-mesh-morphing/) - Use the links below to download: Presentation: “External Aerodynamic Optimization Using ANSYS Mesh Morphing” Automotive Simulation World Congress 2015 June 2015 I Detroit, Michicagan, USA I English
- [Multi-objective CFD optimisation of shaped hole film cooling with mesh morphing](https://www.rbf-morph.com/multi-objective-cfd-optimisation-of-shaped-hole-film-cooling-with-mesh-morphing/) - Goal driven shape optimisation for conjugate heat transfer in an effusion cooling plate Use the links below to download: Paper: Multi-objective CFD optimisation of shaped hole film cooling with mesh morphing Paper: Goal driven shape optimisation for conjugate heat transfer in an effusion cooling plate ASME Turbo Expo 2015: Turbine Technical Conference and Exposition June 2015 I Montréal, Canada I English
- [Aerodynamic Optimization of Car Shapes using the Continuous Adjoint Method and an RBF Morpher](https://www.rbf-morph.com/aerodynamic-optimization-of-car-shapes-using-the-continuous-adjoint-method-and-an-rbf-morpher/) - Use the links below to download: Paper: “Aerodynamic Optimization of Car Shapes using the Continuous Adjoint Method and an RBF Morpher“ 11th International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control (EUROGEN 2015) September 2015 I Glasgow (UK) I English
- [Structural optimization of an automotive wheel rim through an RBF mesh morphing technique](https://www.rbf-morph.com/structural-optimization-of-an-automotive-wheel-rim-through-an-rbf-mesh-morphing-technique/) - Use the links below to download: Paper: “Structural optimization of an automotive wheel rim through an RBF mesh morphing technique” 31st International CAE Conference 2015 October 2015 I Pacengo del Garda Verona, Italy I English
- [Structural optimisation using advanced radial basis functions mesh morphing](https://www.rbf-morph.com/structural-optimisation-using-advanced-radial-basis-functions-mesh-morphing/) - Ottimizzazione strutturale di una biella automobilistica mediante mesh morphing Use the links below to download: Paper: “Structural optimisation using advanced radial basis functions mesh morphing” Paper: “Ottimizzazione strutturale di una biella automobilistica mediante mesh morphing” Associazione italiana per l’analisi delle sollecitazioni 44° Convegno Nazionale (AIAS 2015) September 2015 I Messina, Italy I English/Italian
- [Aircraft & Car Shape Optimization On The RBF4Aero Platform](https://www.rbf-morph.com/aircraft-car-shape-optimization-on-the-rbf4aero-platform/) - Use the links below to download: Paper: Aircraft & Car Shape Optimization On The RBF4Aero Platform 11th HSTAM International Congress on Mechanics May 2016 l Athens l Greece I English
- [Evolutionary aerodynamic shape optimization through the RBF4AERO platform](https://www.rbf-morph.com/evolutionary-aerodynamic-shape-optimization-through-the-rbf4aero-platform/) - Use the links below to download: Paper: 15521 “Combining an rbf-based morpher with continuous adjoint for low-speed aeronautical optimization applications” Paper: 7206 “A mesh morphing based FSI method used in aeronautical optimization applications” Paper: 10088 “Evolutionary aerodynamic shape optimization through the RBF4AERO platform” European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016) June 2016 I Crete Island I Greece I English
- [Geometric Parameterization Strategies for shape Optimization Using RBF Mesh Morphing](https://www.rbf-morph.com/geometric-parameterization-strategies-for-shape-optimization-using-rbf-mesh-morphing/) - Paper: ” Geometric Parameterization Strategies for shape Optimization Using RBF Mesh Morphing” 7th Joint Conference of ADM –INGEGRAF – AIP PRIMECA (JCM 2016) September 2016 I Catania, Italy I English
- [A CAD-MESH mixed approach to enhance shape optimization capabilities](https://www.rbf-morph.com/a-cad-mesh-mixed-approach-to-enhance-shape-optimization-capabilities/) - Presentation: A CAD-MESH mixed approach to enhance shape optimization capabilities Presentation: Structural optimization of heavy section ductile iron components. How the integration and optimization of casting process can improve their design. Presentation: Reshaping the future of aircraft design 32st International CAE Conference (CAE 2016) October 2016 I Parma I Italy I English
- [Multi-objective Optimization of A-Class Catamaran Foils Adopting a Geometric Parameterization Based on RBF Mesh Morphing](https://www.rbf-morph.com/multi-objective-optimization-of-a-class-catamaran-foils-adopting-a-geometric-parameterization-based-on-rbf-mesh-morphing/) - Use the links below to download: Paper: “Multi-objective Optimization of A-Class Catamaran Foils Adopting a Geometric Parameterization Based on RBF Mesh Morphing” 12th International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control (EUROGEN 2017) September 2017 I Madrid, Italy I English
- [Ottimizzazione di forma mediante adjoint strutturale ed RBF mesh morphing](https://www.rbf-morph.com/ottimizzazione-di-forma-mediante-adjoint-strutturale-ed-rbf-mesh-morphing/) - Ottimizzazione di forma mediante adjoint strutturale ed RBF mesh morphing Radial Basis Functions mesh morphing FOR the analysis of CRACKS propagation (RBF4CRACKS) Fluid structure interaction analysis:vortex shedding induced vibrations Use the links below to download: Presentation: “Ottimizzazione di forma mediante adjoint strutturale ed RBF mesh morphing” Presentation: “Radial Basis Functions mesh morphing FOR the analysis
- [An image-based and RBF mesh morphing CFD simulation for aTAA hemodynamic](https://www.rbf-morph.com/an-image-based-and-rbf-mesh-morphing-cfd-simulation-for-ataa-hemodynamic-2/) - An image-based and RBF mesh morphing CFD simulation for aTAA hemodynamic Use the links below to download: Paper: An image-based and RBF mesh morphing CFD simulation for aTAA hemodynamic The Italian Chapter of the European Society of Biomechanics (ESB-ITA) September 2017 I Roma, Italy I English
- [Shape optimization of 3d printed high performances automotive parts](https://www.rbf-morph.com/shape-optimization-of-3d-printed-high-performances-automotive-parts/) - Shape optimization of 3d printed high performances automotive parts Hemo-Elastic study of ascending thoracic aorta aneurysms through RBF mesh morphing Constrained Geometric Parameterization by Mesh Morphing for a Catamaran Foils Optimization Procedure Use the links below to download: Presentation: “Shape optimization of 3d printed high performances automotive parts” Presentation: “Hemo-Elastic study of ascending thoracic aorta
- [Fast FSI in the Fluent Solver using RBF Morph Modal Superposition Method](https://www.rbf-morph.com/fast-fsi-in-the-fluent-solver-using-rbf-morph-modal-superposition-method/) - Fast FSI in the Fluent Solver using RBF Morph Modal Superposition Method Automatic shape optimisation using the Biological Growth Method (BGM) with RBF Morph ACT Extension and ANSYS Mechanical Use the links below to download: Presentation: “Fast FSI in the Fluent Solver using RBF Morph Modal Superposition Method” Presentation: “Automatic shape optimisation using the Biological
- [Automatic shape optimization of structural components with manufacturing constraints](https://www.rbf-morph.com/automatic-shape-optimization-of-structural-components-with-manufacturing-constraints/) - Automatic shape optimization of structural components with manufacturing constraints Crack propagation analysis of near‐surface defects with Radial Basis Functions mesh morphing Use the links below to download: Paper: “Automatic shape optimization of structural components with manufacturing constraints” Paper: “Crack propagation analysis of near‐surface defects with Radial Basis Functions mesh morphing” Associazione italiana per l’analisi delle
- [How RBF mesh morphing can boost multi-physics simulation of vehicle 4.0](https://www.rbf-morph.com/how-rbf-mesh-morphing-can-boost-multi-physics-simulation-of-vehicle-4-0-2/) - Use the links below to download: Presentation: “How RBF mesh morphing can boost multi-physics simulation of vehicle 4.0” SAE International Workshop October 2018 I Rome, Italy I English
- [Combining Adjoint Optimization and mesh morphing for CFD applications](https://www.rbf-morph.com/combining-adjoint-optimization-and-mesh-morphing-for-cfd-applications/) - Combining Adjoint Optimization and mesh morphing for CFD applications FSI optimization of industrial airplanes: the P180 Avanti EVO study The medical digital twin assisted by Reduced Order Models and Mesh Morphing Use the links below to download: Paper: “Combining Adjoint Optimization and mesh morphing for CFD applications” Paper: “FSI optimization of industrial airplanes: the P180
- [RBF Morph and ANSYS Contribution to GMGW-2 (case 3 – OPAM-1)](https://www.rbf-morph.com/rbf-morph-and-ansys-contribution-to-gmgw-2-case-3-opam-1/) - Use the links below to download: Presentation: “RBF Morph and ANSYS Contribution to GMGW-2 (case 3 – OPAM-1) ” 2 nd AIAA Geometry and Mesh Generation Workshop AIAA SciTech January 2019 I San Diego, USA I English
- [High Performance RBF Mesh Morphing Solutions to Face Typical Aerospace Problems](https://www.rbf-morph.com/high-performance-rbf-mesh-morphing-solutions-to-face-typical-aerospace-problems/) - Use the links below to download: Presentation: “High Performance RBF Mesh Morphing Solutions to Face Typical Aerospace Problems” ANSYS Innovation User Conference and Workshop 2019 May 2019 I Coventry, UK I English
- [RBF mesh morphing and reduced order models (ROM) squeeze high fidelity CAE simulations into real time digital twins](https://www.rbf-morph.com/rbf-mesh-morphing-and-reduced-order-models-rom-squeeze-high-fidelity-cae-simulations-into-real-time-digital-twins-2/) - RBF mesh morphing and reduced order models (ROM) squeeze high fidelity CAE simulations into real time digital twin
- [CAEUp – Update of CAE models on actual manufactured shapes](https://www.rbf-morph.com/caeup-update-of-cae-models-on-actual-manufactured-shapes-article/) - Multiphysics numerical investigation of the aeroelastic stability of a Le Mans Prototype car Optimisation of industrial parts by mesh morphing enabled automatic shape sculpting Use the links below to download: Presentation: “CAEUp – Update of CAE models on actual manufactured shapes” Presentation: ” Multiphysics numerical investigation of the aeroelastic stability of a Le Mans Prototype car” Presentation: “Optimisation
- [CAE Up: digital twins at the service of manufacturing processes](https://www.rbf-morph.com/cae-up-digital-twins-at-the-service-of-manufacturing-processes/) - Mesh morphing enabled automatic surface sculpting for industrial parts optimization Use the links below to download: Presentation: CAE Up: digital twins at the service of manufacturing processes Presentation: Mesh morphing enabled automatic surface sculpting for industrial parts optimization CAE Conference 2019 November 2019 I Asissi, Italy I English
- [CAD model update on as-built geometries with morphing technique: iter winding pack](https://www.rbf-morph.com/cad-model-update-on-as-built-geometries-with-morphing-technique-iter-winding-pack/) - Modeling flexible/curved pcbs using rbf mesh morphing Use the links below to download: Presentation: “CAD model update on as-built geometries with morphing technique: iter winding pack” Presentation: “Modeling flexible/curved pcbs using rbf mesh morphing” AIAS Conference 2020 September I 2020 I English
- [A Gradient Based Optimization Workflow Based on CFD Adjoint Solver and Advanced RBF Mesh Morphing](https://www.rbf-morph.com/a-gradient-based-optimization-workflow-based-on-cfd-adjoint-solver-and-advanced-rbf-mesh-morphing/) - Use the link below to download: Presentation: “A Gradient Based Optimization Workflow Based on CFD Adjoint Solver and Advanced RBF Mesh Morphing” ESTECO UM 2020 September I 2020 I English
- [Bio-Inspired Optimization Based on BGM and Mesh Morphing Surface Sculpting](https://www.rbf-morph.com/bio-inspired-optimization-based-on-bgm-and-mesh-morphing-surface-sculpting/) - Use the link below to download: Presentation: “Bio-Inspired Optimization Based on BGM and Mesh Morphing Surface Sculpting” BIOMA 2020 November I 2020 I English
- [Mesh morphing techniques for the numerical analysis of Flexible PCBs](https://www.rbf-morph.com/mesh-morphing-techniques-for-the-numerical-analysis-of-flexible-pcbs/) - Mesh morphing techniques for the numerical analysis of Flexible PCBs A parameter less shape optimization process allows to extend fatigue life of structural parts subjected to thermal fatigue An advanced CFD post-processing tool enabled by adjoint and RBF mesh morphing allows the fast exploration of an arbitrary number of shape parameters effect on performances Use
- [Advanced radial basis function mesh morphing of RBF Morph for LS-DYNA enabled in Ansys Mechanical](https://www.rbf-morph.com/advanced-radial-basis-function-mesh-morphing-of-rbf-morph-for-ls-dyna-enabled-in-ansys-mechanical/) - Advanced radial basis function mesh morphing of RBF Morph for LS-DYNA enabled in Ansys Mechanical Use the link below to download: Presentation: “Advanced radial basis function mesh morphing of RBF Morph for LS-DYNA enabled in Ansys Mechanical” Simulation Summit December I 2020 I English Design and Aeroelastic Measurements of the RIBES Wing Published on ASCE’s Journal of Aerospace
- [Automatic Optimization Method Based on Mesh Morphing Surface Sculpting Driven by Biological Growth Method: an Application to Coiled Spring Section Shape](https://www.rbf-morph.com/automatic-optimization-method-based-on-mesh-morphing-surface-sculpting-driven-by-biological-growth-method-an-application-to-coiled-spring-section-shape/) - Automatic Optimization Method Based on Mesh Morphing Surface Sculpting Driven by Biological Growth Method: an Application to Coiled Spring Section Shape Analysis of Vortex Induced Vibration of a thermowell by high fidelity FSI numerical analysis based on RBF structural modes embedding Use the link below to download: Presentation: Automatic Optimization Method Based on Mesh Morphing
- [Reshaping the DEMO Tokamak’s TF Coil with high fidelity Multiphysics CAE and advanced mesh morphing](https://www.rbf-morph.com/reshaping-the-demo-tokamaks-tf-coil-with-high-fidelity-multiphysics-cae-and-advanced-mesh-morphing/) - Reshaping the DEMO Tokamak’s TF Coil with high fidelity Multiphysics CAE and advanced mesh morphing Simulation and mitigation of Vortex Induced Vibrations by means of high fidelity FSI simulation and advanced mesh morphing Use the link below to download: Presentation: Reshaping the DEMO Tokamak’s TF Coil with high fidelity Multiphysics CAE and advanced mesh morphing Presentation: Simulation
- [AIAS Conference 2022](https://www.rbf-morph.com/aias-conference-2022/) - September I 2022 I English Use the links below to download the presentations: Presentation: Pedaling cyclist modeling: a combined fem and mesh morphing approach Presentation: A medical digital twin derived from a patient-specific thoracic aorta model to investigate the effects of the heart motion on the vessel wall Presentation: The preliminary thermo-mechanical design, simulation and optimization, of LAD
- [VPH2022 Conference](https://www.rbf-morph.com/vph2022-conference/) - September I 2022 I English Use the links below to download the presentation: Presentation: Impact of image segmentation variability on hemodynamic prediction of flow quantities in AAA
- [Workshop Heart Valve Replacements: Past, Present, and Future Directions](https://www.rbf-morph.com/workshop-heart-valve-replacements-past-present-and-future-directions/) - September I 2022 I English Use the links below to download the presentation: Presentation: Digital Twins and Medicine 4.0: from in silico simulations to patient specific solutions
- [ANSYS LEVEL UP](https://www.rbf-morph.com/ansys-level-up/) - October I 2022 I English Use the link below to download the presentation Presentation: Make FEA more Flexible with Mesh Morphing
- [CAE Conference 2022: RBF Metamorphosis: a new way to optimize digital twins and multi-physics simulation](https://www.rbf-morph.com/cae-conference-2022-rbf-metamorphosis-a-new-way-to-optimize-digital-twins-and-multi-physics-simulation/) - November I 2022 I English Use the links below to download the presentations or watch the recordings: Presentation and Video Overview of our RBF Morph Solutions – RBF Morph Presentation and Video Cylinder Head FEA Shape Optimisation with RBF Morph – Cummins Presentation and Video FEA shape optimization of a Nissan Micra front subframe – NIssan Presentation and Video Two-way coupled aeroelastic analysis of a Dallara Le
- [AFCEA 2022 – Armed Forces Communications & Electronics Association](https://www.rbf-morph.com/afcea-2022-armed-forces-communications-electronics-association/) - December I 2022 I English Use the link below to download the presentation: Presentation and Video: High fidelity CAE simulations for real time Digital Twin
- [Workshop – Digital Twins Aerospace](https://www.rbf-morph.com/workshop-digital-twins-aerospace/) - December I 2022 I English Use the link below to download the presentation Presentation: The role of high fidelity Cae multi-physics
- [Healthy Buildings 2023 Europe Conference](https://www.rbf-morph.com/healthy-buildings-2023-europe-conference/) - June I 2023 I English Use the link below to download the presentation: Presentation: A Digital Twin of an Operating Theater
- [The Medicine and Technological Singularity 2023](https://www.rbf-morph.com/the-medicine-and-technological-singularity-2023/) - September I 2023 I English Use the links below to download the presentation: Presentation: The medical digital twin: the-medical-digital-twin-unleashing-high-fidelity-in-silico-simulations-for-patient-specific-solutions
- [AIAS Conference 2023](https://www.rbf-morph.com/aias-conference-2023/) - September I 2023 I English Use the links below to download the presentations: Presentation: Design And Optimization Of Aeronautical Components And Digital Twins Development Presentation: Advancing Structural Optimization of an Electric Motor Rotor through Mesh Morphing Techniques Presentation: Stress mitigation of a thermal engine head block using the bioinspired BGM-FEM method
- [14th European LS-DYNA Conference 2023](https://www.rbf-morph.com/14th-european-ls-dyna-conference-2023/) - October I 2023 I English Use the links below to download the presentation and paper: Presentantion and Paper: Reduced Order Model for enhanced EVAR Planning and navigation guidance
- [Lung Modelling Congress 2023](https://www.rbf-morph.com/lung-modelling-congress-2023/) - November I 2023 I English Use the links below to download the presentation: Presentation: Enabling the Medical Digital Twin of Human Airways by advanced mesh morphing and high-fidelity patient-specific simulations
- [The growing importance of numerical simulation in the nautical sector](https://www.rbf-morph.com/the-growing-importance-of-numerical-simulation-in-the-nautical-sector-2/) - Published on the Futurities EnginSoft Newsletter Year 20 n. 4 Winter 2023Download the PDF
- [RBF Morph software How to reshape the CAE workflows by Radial Basis Functions mesh morphing](https://www.rbf-morph.com/rbf-morph-software-how-to-reshape-the-cae-workflows-by-radial-basis-functions-mesh-morphing-2/) - Use the links below to download: Paper: “TechNet Alliance 2014” TechNet Alliance Spring Meeting April 2014 I Malta I English
- [RBF-based aerodynamic optimization of an industrial glider](https://www.rbf-morph.com/rbf-based-aerodynamic-optimization-of-an-industrial-glider/) - Use the links below to download: Paper: “RBF-based aerodynamic optimization of an industrial glider” 30th International CAE Conference 2014 October 2014 I Pacengo del Garda, Verona, Italy I English
- [Reliable mesh morphing approach to handle icing simulations on complex models](https://www.rbf-morph.com/reliable-mesh-morphing-approach-to-handle-icing-simulations-on-complex-models/) - Use the links below to download: Presentation: “Reliable Mesh Morphing Approach To Handle Icing Simulations On Ccomplex Models” 4th EASN Association International Workshop on Flight Physics and Aircraft Design (EASN 2014) October 2014 I Aachen Germany I English
- [A Cfd-based wing sail optimisation method coupled to a VPP](https://www.rbf-morph.com/a-cfd-based-wing-sail-optimisation-method-coupled-to-a-vpp/) - 5th High Performance Yacht Design Conference 2015 March 2015 I Auckland I English If you are interested in this paper below, then just get in touch with us!
- [RBF mesh morphing and reduced order models (ROM) squeeze high fidelity CAE simulations into real time digital twins](https://www.rbf-morph.com/rbf-mesh-morphing-and-reduced-order-models-rom-squeeze-high-fidelity-cae-simulations-into-real-time-digital-twins/) - Use the links below to download: Presentation: “RBF mesh morphing and reduced order models (ROM) squeeze high fidelity CAE simulations into real time digital twins” Workshop HPC for Industry 4.0@Cineca May 2019 I Milano, Italy I English
- [Radial Basis Functions Mesh Morphing: A Comparison Between the Bi-harmonic Spline and the Wendland C2 Radial Function](https://www.rbf-morph.com/radial-basis-functions-mesh-morphing-a-comparison-between-the-bi-harmonic-spline-and-the-wendland-c2-radial-function/) - Radial Basis Functions Mesh Morphing: A Comparison Between the Bi-harmonic Spline and the Wendland C2 Radial Function Published on the Computational Science – ICCS 2020. ICCS 2020. Lecture Notes in Computer Science, vol 12142. Springer, June 2020 ICCS 2020 June I 2020 I English
- [Advanced Radial Basis Functions Mesh Morphing for High Fidelity FSI with Known Movement of the Walls: Simulation of an Aortic Valve](https://www.rbf-morph.com/advanced-radial-basis-functions-mesh-morphing-for-high-fidelity-fsi-with-known-movement-of-the-walls-simulation-of-an-aortic-valve-2/) - Advanced Radial Basis Functions Mesh Morphing for High Fidelity FSI with Known Movement of the Walls: Simulation of an Aortic Valve Published on the Computational Science – ICCS 2020. ICCS 2020. Lecture Notes in Computer Science, vol 12142. Springer, June 2020 ICCS 2020 June I 2020 I English
- [Aerodynamics optimization of a motorglider by using of mesh-morphing](https://www.rbf-morph.com/__trashed-2/)
- [An investigation on digital twin methodologies for the ITER project](https://www.rbf-morph.com/an-investigation-on-digital-twin-methodologies-for-the-iter-project/) - ITER is an ambitious global energy project that aims to demonstrate fusion feasibility and achieve net energy production. Design requirements and stringent tolerances of the machine drive industries to higher quality standards. Digital Twin methodologies can provide valuable information for decision-making and risk management during manufacturing. In this PhD thesis by Edoardo Pompa, a workflow of
- [The growing importance of numerical simulation in the nautical sector](https://www.rbf-morph.com/the-growing-importance-of-numerical-simulation-in-the-nautical-sector/) - Published on the Futurities EnginSoft Newsletter Year 20 n. 3 Autumn 2023 Download the PDF
- [RBF Morph at the Healthy Buildings 2023](https://www.rbf-morph.com/rbf-morph-at-the-healthy-buildings-2023/) - The HB 2023 conference, held from 11th to 14th June in Aachen, Germany, brought together leading experts in sustainable solutions for a healthy indoor environment. Notably, Giovanna Gargiulo, in collaboration with the University of Rome Tor Vergata and the National Institute of Health in Rome, presented her groundbreaking academic work on 'A Digital Twin of
- [Ansys and RBF Morph join forces to bring state-of-the-art mesh morphing technology to multiple industries](https://www.rbf-morph.com/ansys-and-rbf-morph-join-forces-to-bring-state-of-the-art-mesh-morphing-technology-to-multiple-industries/) - RBF Morph's unique simulation tools are now part of Ansys' portfolio Rome, Italy, 19 July 2023 – After a long and successful OEM partnership with Ansys, RBF Morph has two proprietary products featured among the world simulation leader's offerings: Ansys RBF Morph Fluids and Ansys RBF Morph Structures. The two simulation tools are based on
- [New article published in Futurities](https://www.rbf-morph.com/new-article-published-in-futurities/) - We are proud to be featured in the Futurities Summer Issue with the Copernicus project, a cloud-based HPC platform to support systemic-pulmonary shunting procedures. Copernicus aims to set up an affordable decision support web application that allows surgeons approaching the Modified Blalock Taussig Shunt (mBTS) medical intervention at best. Read the full article to learn
- [AIAS 2023 Conference](https://www.rbf-morph.com/aias-2023-conference/) - We are in Genoa for the AIAS 2023 Conference, the most important event in the scientific field of ING-IND/14. The Italian Scientific Society of Mechanical Design and Machine Construction offers a unique opportunity - from September 6th to 9th - to connect with colleagues and experts in the field, discuss the latest trends and developments,
- [RBF Morph Shines at IMSA 2023: Celebrating Innovation in Italy's Startup Ecosystem](https://www.rbf-morph.com/rbf-morph-shines-at-imsa-2023-celebrating-innovation-in-italys-startup-ecosystem/) - In the fast-paced world of technology startups, recognition and acknowledgment often come as validation of dedication and innovation. RBF Morph, a prominent player in the field of mesh morphing and simulation, has been selected to participate in the prestigious Premio Italian Master Startup Award (IMSA) 2023. Since its inception in 2007, IMSA has been at
- [RBF Morph's Exciting Participation in the 14th European LS-DYNA Conference](https://www.rbf-morph.com/rbf-morphs-exciting-participation-in-the-14th-european-ls-dyna-conference/) - (Image: Baden-Baden Kur & Tourismus GmbH) RBF Morph is delighted to announce our active participation in the upcoming 14th European LS-DYNA Conference, scheduled for October 18 and 19 in the beautiful city of Baden-Baden, Germany. This event is a true highlight for us and for LS-DYNA enthusiasts across Europe and beyond. With more than 200
- [New article published in Futurities](https://www.rbf-morph.com/new-article-published-in-futurities-2/) - We are delighted to announce our feature in the autumn issue of Futurities, EnginSoft's Magazine for Simulation-Based Engineering & Sciences. In this edition, our founder, Marco Evangelos Biancolini, had the privilege of conducting an insightful interview with Ignazio Maria Viola and Ubaldo Cella, esteemed experts from the Journal of Sailing Technology. Together, they delve into
- [Exploring the Future of Aerospace: A Recap of the Digital Twins Workshop at the University of Rome "Tor Vergata](https://www.rbf-morph.com/exploring-the-future-of-aerospace-a-recap-of-the-digital-twins-workshop-at-the-university-of-rome-tor-vergata/) - On December 14th, the University of Rome "Tor Vergata" played host to a cutting-edge workshop titled "Digital Twins 4 Aerospace: CAE Modelling of Future Mobility." This event served as a platform for researchers and engineers from both academia nd industry to delve into the latest advancements in numerical analysis and design methodologies within the aerospace
- [Copernicus: A cloud-based HPC platform to support systemic-pulmonary shunting procedures](https://www.rbf-morph.com/copernicus-a-cloud-based-hpc-platform-to-support-systemic-pulmonary-shunting-procedures/) - Published on the Futurities EnginSoft Newsletter Year 20 n. 2 Summer 2023Download the PDF
- [Development of a fast high fidelity FSI workflow to simulate polymeric aortic valves: a RBF mesh morphing study](https://www.rbf-morph.com/development-of-a-fast-high-fidelity-fsi-workflow-to-simulate-polymeric-aortic-valves-a-rbf-mesh-morphing-study/) - Biomedical Engineering is a field at the forefront of innovation, constantly pushing boundaries to enhance medical technology and improve patient outcomes.
- [RBF Morph at the Automotive CAE Grand Challenge 2024 in Frankfurt, Germany](https://www.rbf-morph.com/rbf-morph-at-the-automotive-cae-grand-challenge-2024-in-frankfurt-germany/) - We attended the Automotive CAE Grand Challenge on 16 and 17 April 2024 in Frankfurt, Germany, and we were among the speakers.
- [Exploring Innovations in Engineering Simulation: We Are Attending NAFEMS Italy Conference 2024!](https://www.rbf-morph.com/exploring-innovations-in-engineering-simulation-we-are-attending-nafems-italy-conference-2024/) - As relatively new members of NAFEMS, we are thrilled to participate in the NAFEMS Italy Conference 2024, scheduled for May 2, 2024.
- [Ottimizzazione fluido-struttura di velivoli industriali: il caso del P180 Avanti EVO](https://www.rbf-morph.com/ottimizzazione-fluido-struttura-di-velivoli-industriali-il-caso-del-p180-avanti-evo-2/) - Download the pdf Published on November 2018 Issue of the Italian Magazine “A&C Analisi e Calcolo”.
- [Combining Analytical Models and Mesh Morphing Based Optimization Techniques for the Design of Flying Multihulls Appendages](https://www.rbf-morph.com/combining-analytical-models-and-mesh-morphing-based-optimization-techniques-for-the-design-of-flying-multihulls-appendages-2/) - See the link Published on Journal of Sailing Technology 2021, volume 6, issue 1, pp. 151 – 172
- [Press Release June 2009: RBF Morph 1.1 released](https://www.rbf-morph.com/66-press-release-june-2009/) - We are proud to announce RBF Morph, an integrated system for morphing and shape optimization tailored for the CFD solver ANSYS Fluent. RBF Morph is a unique morpher that combines a very accurate control of the geometrical parameters with an extremely fast mesh deformation, fully integrated in the CFD solving process. RBF Morph is the
- [RBF Morph at the EASC](https://www.rbf-morph.com/68-easc/) - RBF Morph will be present at the European Automotive Simulation Conference (EASC). This unique, biennial event is the one-stop Automotive Simulation Conference for Road, Rail, Racetrack and Off-Highway Vehicle Engineering. Whereas the former EACC conferences concentrated on fluid flow simulation, the coming EASCevent will cover the full spectrum of simulation aspects and account for
- [RBF Morph at EnginSoft Conference](https://www.rbf-morph.com/67-rbf-morph-at-enginsoft-conference/) - RBF Morph will be present at the EnginSoft International Conference 2009 on the 1st and 2nd of October in Bergamo - Centro Congressi Giovanni XXIII, with the contribution RBF Morph: a fast meshless morpher for Fluent. Simulation and Virtual Prototyping are seen as key disciplines for achieving progress in engineering and science in the 21st
- [RBF Morph wins the Most Advanced Approach Award](https://www.rbf-morph.com/69-award/) - RBF Morph has been awarded for the Most Advanced Approach using integrated and combined simulation methods at the European Automotive Simulation Conference (EASC). RBF Morph has been present during the event as offical Ansys Inc. partner. A significant success has been obtained at this event, considering the particular attention received at the booth and during
- [RBF Morph Info Day 24 November](https://www.rbf-morph.com/72-rbf-morph-presentation-november/) - We are proud to announce RBF Morph Info Day. The staff of RBF Morph will present and demonstrate in full details all the features of the software on the 24th of November in Milan, at Ansys Italia. A unique opportunity to see RBF Morph in action! Provisional Agenda: 09.30 - RBF Morph team presentation 10.00 - Software presentation 11.00 - Demo
- [RBF Morph YouTube Channel](https://www.rbf-morph.com/75-rbf-morph-youtube/) - We have published the Rbf Morph YouTube Channel. Take a look to uploaded videos to see RBF Morph in action! We have also published our video Tutorial on our site. Go to the page rbf-morph.com/video. With YouTube you can embed our videos using standard embedding or using a custom player like this. Are you interested
- [RBF Morph driven by modeFRONTIER](https://www.rbf-morph.com/84-rbf-morph-mode-frontier/) - A successful coupling between RBF Morph and modeFRONTIER has been presented at the EnginSoft International Conference 2009 held on the 1st and 2nd of October in Bergamo - Centro Congressi Giovanni XXIII. The content of the poster "Shape optimisation tools for CFD analysis: RBF Morph, Ansys Fluent and modeFRONTIER" is available also on the portal
- [RBF Morph at EnginSoft Conference 2009](https://www.rbf-morph.com/85-rbf-morph-at-enginsoft-conference-2009/) - RBF Morph has been present at the EnginSoft International Conference 2009 on the 1st and 2nd of October in Bergamo - Centro Congressi Giovanni XXIII. The coupling between RBF Morph and modeFRONTIER has been also presented in the poster Session. All the published material (paper, poster, presentation) is available on the download area of this
- [Press Release December 2009: RBF Morph 1.2 announced](https://www.rbf-morph.com/88-press-release-december-2009/) - We are proud to announce the new version 1.2 of RBF Morph, the integrated system for morphing and shape optimization tailored for the CFD solver ANSYS Fluent. RBF Morph 1.1 has been released in July 2009. Thanks to the feedback of our users (and potential users met at EASC, at EnginSoft Conference and at RBF Morph
- [Press Release January 2010: RBF Morph 1.2 released](https://www.rbf-morph.com/90-press-release-january-2010/) - We have released the version 1.2 of RBF Morph, the integrated system for morphing and shape optimization tailored for the CFD solver ANSYS Fluent. RBF Morph 1.1 has been released in July 2009. Thanks to the feedback of our users (and potential users met at EASC, at EnginSoft Conference and at RBF Morph Info Day) and
- [RBF Morph driven by DesignXplorer at EnginSoft Conference 2010](https://www.rbf-morph.com/94-rbf-morph-at-enginsoft-conference-2010/) - RBF Morph will be present at the EnginSoft International Conference 2010 on the 21th and 22th of October in Montichiari (Bs) - Centro Fiera del Garda with the paper RBF Morph driven by DesignXplorer: the fastest approach for shape optimisation by Dr. Marco Evangelos Biancolini. Abstract Product developers must quickly perform and test numerous design
- [RBF Morph at AIAS 2010 Conference](https://www.rbf-morph.com/rbf-morph-at-aias-2010-conference/) - A study conducted using RBF Morph for the shape optimisation of a Formula SAE car engine air box has been presented at the Italian Conference AIAS 2010 held on 7-10 of September in Maratea. All the published material (paper, poster and an extended abstract) is available on the Presentations and Proceedings Area.
- [RBF Morph at MIRA Conference 2010](https://www.rbf-morph.com/95-rbf-morph-at-mira-conference-2010/) - RBF Morph has been present at the 8th MIRA International Vehicle Aerodynamics Conference on the 13th and 14th of October in Grove Oxfordshire (UK) - RBS Williams F1 Conference Centre with the paper An Advanced RBF Morph Application: Coupled CFD CSM Aeroelastic Analysis of a Full Aircraft Model and Comparison to Experimental Data by Dr.
- [ANSYS Webinar on line: Mesh Morphing Accelerates Design Optimization](https://www.rbf-morph.com/98-ansys-webinar/) - RBF Morph and ANSYS FLUENT Software Combine to Produce a Solution for Shape Modifications Through Mesh Updating Product developers must quickly perform and test numerous design variations in an environment steeped in complex customer requirements and short development cycles. Faced with increasing competition, companies have to produce higher performing products and deliver in shorter time
- [RBF Morph at EnginSoft Conference 2010](https://www.rbf-morph.com/99-rbf-morph-at-enginsoft-conference-2010/) - RBF Morph has been present at the EnginSoft International Conference 2010 on the 21th and 22th of October in Montichiari (Bs) - Centro Fiera del Garda with the paper Shape optimization tools for CFD analysis: ANSYS Fluent, RBF Morph and modeFRONTIER and the poster RBF Morph driven by DesignXplorer: the fastest approach for shape optimisation by
- [Press Release February 2011: RBF Morph 1.3 announced](https://www.rbf-morph.com/86-press-release-february-2011/) - We are proud to announce the new version 1.3 of RBF Morph, the integrated system for morphing and shape optimization tailored for the CFD solver ANSYS Fluent. RBF Morph 1.2 has been released in January 2010.Thanks to the feedback of our users and to our continuous effort to make RBF Morph the fastest mesh morphing
- [RBF Morph papers](https://www.rbf-morph.com/rbf-morph-papers/) - Several papers about RBF Morph have recently been published. Il parabrezza variotouring, in the March 2010 Issue of the Italian Magazine "Mototecnica". Mesh Morphing Accelerates Design Optimization, in the ANSYS Advantage Magazine - Volume IV, Issue 1, 2010, Web Exclusives Section. Una soluzione per l'ottimizzazione di forma, has been published in the September 2010 Issue
- [ANSYS Webinar 7-9 June: Learn How Mesh Morphing Accelerates CFD-Driven Shape Modifications](https://www.rbf-morph.com/100-ansys-webinar-2011/) - Learn How Mesh Morphing Accelerates CFD-Driven Shape Modifications Tuesday, June 07, 2011 9:00 A.M. EDT, 1:00 P.M. GMT Thursday, June 09, 2011 4:00 P.M. EDT, 8:00 P.M. GMT Duration: 60 minutes Register for the June 07 session Register for the June 09 session Join us for this one-hour presentation, during which you will learn how
- [RBF Morph Info Day 5 May 2011](https://www.rbf-morph.com/103-rbf-morph-presentation-may-2011/) - We are proud to announce that RBF Morph will be presented during the ANSYS Live Seminar CFD ad alta produttività con ANSYS FLUENT WORKBENCH e RBF Morph that will be held on the 5th of May in Rome, at University Tor Vergata. Tempi sempre più ristretti per lo sviluppo dei prodotti, competizione globale, necessità di
- [ANSYS Webinar on line: Learn How Mesh Morphing Accelerates CFD-Driven Shape Modifications](https://www.rbf-morph.com/104-ansys-webinar-2011/) - This webinar will inform you how you can drastically reduce the simulation time to complete a set of design changes, without the burden of regenerating a geometry or mesh. RBF Morph is a unique mesh morpher that combines the very accurate control of geometric parameters with extremely fast mesh deformation, all fully integrated with the
- [RBF Morph at AIAS 2011 Conference](https://www.rbf-morph.com/rbf-morph-at-aias-2011-conference/) - A study conducted using RBF Morph investigating the fluid structure interaction effect on the performances of a Formula 1 front has been presented at the Italian Conference AIAS 2011 on 7-10 of September in Palermo. Find papers and publications in the Presentations and Proceedings Area; a direct link to the presentation "Fluid Structure Interaction (FSI)
- [RBF Morph at CILEA Summer School 2011: Computational Tools For Hemodynamics Applications](https://www.rbf-morph.com/107-summer-school2011/) - We are pleased to announce that RBF Morph staff will be present at the Summer School held by CILEA on 12-15 September 2011. Learn how RBF Morph can be used for parametric studies for hemodynamics. After an introduction to parametric studies of hemodynamics using mesh morphing, the RBF theoretical background will be presented demonstrating the
- [RBF Morph at 2011 Ansys UK Conference](https://www.rbf-morph.com/109-rbf-morph-at-ansysuk-conference-2011/) - RBF Morph will be present at the 2011 Ansys UK Conference on the 9th November at the Heritage Motor Centre in Gaydon - Warwickshire with the poster Sail trim optimisation using mesh morphing by M.E. Biancolini, I. M. Viola, M. Riotte. Abstract The study is focused on the use of mesh morphing to explore the
- [RBF Morph at EnginSoft Conference 2011](https://www.rbf-morph.com/106-rbf-morph-at-enginsoft-conference-2011/) - RBF Morph has been present at the EnginSoft International Conference 2011 on the 20th and 21th of October in Verona - Fiera Verona with the paper Fluid Structure Interaction (FSI) with RBF Morph: a Generic Formula 1 Front End by M. E. Biancolini and with the poster VMTK - Fluent - RBF Morph: A New
- [RBF Morph at SAE 2012 World Congress](https://www.rbf-morph.com/111-rbf-morph-at-sae-2012/) - "The SAE 2012 World Congress theme, Get Connected, represents the new and diverse connections that will drive significant advancements in the auto industry of tomorrow. Not only does the theme symbolize literal connections, such as those between vehicles, infrastructure, the Internet, and the nation's electrical grid, but also demonstrates the most fundamental of connections; the
- [RBF Morph on PMW magazine](https://www.rbf-morph.com/112-pmw2012/) - An interesting paper, HIGHER-SPEED CFD by D. Caridi & A. Wade, has been published in the Professional Motorsport Magazine Issue of April. The latest engineering simulation software from ANSYS is making it easier for motorsport aerodynamicists to trial more options, faster, in the pursuit of optimal performance. Morphing into ‘Ugly Nose’ configuration with RBF Morph.
- [ANSYS White paper "How Design Optimization Can Help Vault Your Product Ahead of Competitors’"](https://www.rbf-morph.com/114-ansys-wp-design-opt/) - Have a look to the ANSYS page Optimization & Robust Design describing the the recently-released white paper: How Design Optimization Can Help Vault YourProduct Ahead of Competitors’ by Gilles Eggenspieler. Abstract Simulation offers the potential to improve the performance of nearly any product or process by predicting its behavior prior to building a prototype, providing
- [RBF Morph at ANSYS/ATA Italian Seminar](https://www.rbf-morph.com/rbf-morph-at-ansysata-italian-seminar/) - RBF Morph will be presented at the Italian seminar "System simulation & design optimization for automotive and aerospace" on the 13th June 2012 at Auditorium CEA – Centro Ricerche Fiat Via Fausto Coppi, 1 – Orbassano (TO). We look forward to see you in Orbassano!
- [Playback ANSYS Webinar 26-31 July: Learn How Mesh Morphing Accelerates CFD-Driven Shape Modifications](https://www.rbf-morph.com/116-ansys-webinar-2012/) - Learn How Mesh Morphing Accelerates CFD-Driven Shape Modifications Thursday, July 26, 2012 1:00 P.M. EDT, 5:00 P.M. GMT Tuesday, July 31, 2012 9:00 A.M. EDT, 1:00 P.M. GMT Duration: 60 minutes This webinar will inform you how you can drastically reduce the simulation time to complete a set of design changes, without the burden of
- [RBF Morph at CompImage2012](https://www.rbf-morph.com/117-rbf-morph-at-compimage-2012/) - RBF Morph will be present at the Conference CompImage 2012 that will be held on the 5th September at the Department of Computer Control and Management Engineering Antonio Ruberti, Sapienza University of Rome, with the paper A new workflow for patient specific image-based hemodynamics: parametric study of the carotid bifurcation by M.E. Biancolini, R. Ponzini,
- [RBF Morph at EFMC9](https://www.rbf-morph.com/118-rbf-morph-at-efmc9/) - RBF Morph will be present at the 9th European Fluid Mechanics Conference EFMC9 that will be held on 9 -13 September 2012 at Main lecture hall of the University of Rome "Tor Vergata", with two presentations: A review of mesh morphing applications using RBF Morph (12th 15:30 session IND2 room P12) by M.E. Biancolini and
- [RBF Morph at International CAE Conference 2012](https://www.rbf-morph.com/119-rbf-morph-at-enginsoft-conference-2012/) - RBF Morph has been present at the International CAE Conference 2012on the 22th and 23th of October in Lazise (VR) - Hotel Parchi del Garda with the paper Optimization of wing efficiency vs. sweep angles using mesh morphing by M.E. Biancolini, U. Cella, M. Mancini & G. Travostino. The paper contains the results of a
- [Presentation by Leeds University: "An optimization study of a ship hull"](https://www.rbf-morph.com/120-leeds-news-2012/) - You can find online the presentation "An optimization study of a ship hull", about an interesting study by Dr. A. Pranzitelli (University of Leeds, Leeds, UK) & D. Caridi (ANSYS UK, Sheffield) demonstrating how RBF Morph can be used to achieve a 7.9% reduction in resistance for the Series 60 CB=0.6 ship hull.
- [Presentation by Rome University: "Optimization of an exhaust system using mesh morphing"](https://www.rbf-morph.com/121-uniroma-news-2012/) - You can find online in our download area the presentation "Optimization of an exhaust system using mesh morphing", about an interesting study by Dr. M E. Biancolini (University of Rome Tor Vergata, Italy) & D. Caridi (ANSYS Italia, Milan) demonstrating how RBF Morph can be used to reduce and balance pressure losses in the exhaust
- [The 50:50:50 Method in the Italian journal "Ingegneria dell'autoveicolo"](https://www.rbf-morph.com/122-ata-50-50-50/) - A new paper about 50:50:50 method has been published on the Italian Journal "Ingegneria dell'autoveicolo" VOL. 65 N.7/8 Jul/Aug 2012. It is available using a direct link. Abstract Computational Fluid Dynamics (CFD) is widely used in vehicle aerodynamics development today, but typically used to study one vehicle shape at a time. In order to be used
- ["Mesh Morphing to synchronize shapes CAD and CAE" in the Italian journal Il Progettista Industriale](https://www.rbf-morph.com/123-paper-pi-2012/) - A new paper about RBF Morph has been published on the Italian Journal "Il Progettista Industriale" Nov. 2012. It is available in the download area for registered users or using a direct link. Abstract "Mesh Morphing to synchronize shapes CAD and CAE" One of the most important requirements of shape optimization algorithms is an accurate
- ["Mesh morphing techniques for the optimization in the aeronautical field" in the Italian journal A&C](https://www.rbf-morph.com/131-paper-ac-2013/) - A new paper about RBF Morph has been published on the Italian Journal "Analisi e Calcolo" May 2013. It is available in the download area for registered users or using a direct link. Abstract "Mesh morphing techniques for the optimization in the aeronautical field" This paper explores the use of mesh morphing in the aeronautical
- ["Mesh morphing techniques for the optimization in the nautical field" in the journal A&C](https://www.rbf-morph.com/155-paper-ac-2013/) - A novel article about numerical analyses and optimization on yachts performed by means of RBF Morph has been published on the Italian Journal "Analisi e Calcolo" May 2014. Such an article is available in the download area for registered users or using a direct link. Abstract "Alla ricerca delle
- ["Shaping Up" in the ANSYS Advantage Magazine](https://www.rbf-morph.com/125-paper-advantage-2013/) - A new paper about the usage of RBF Morph for aircraft sahpe optimisation has been published in the ANSYS Advantage - Volume VII, Issue 1, 2013 It is available in the download area for registered users or using a direct link. Abstract "SHAPING UP: Mesh morphing reduces the time required to optimize an aircraft wing."
- [RBF Morph at ANSYS Italian UGM 2013](https://www.rbf-morph.com/126-rbf-morph-at-italian-ugm-2013/) - RBF Morph will be a partner of the ANSYS User Group Meeting – Italia that will be held on the 20th and 21th of June in Salsomaggiore Terme (Parma) - Palazzo dei Congressi. An excellent chance to learn more about RBF mesh morphing and to understand how ANSYS Fluent CFD solver capabilities can be extended
- [RBF Morph at PRACE Autumn School 2013](https://www.rbf-morph.com/127-prace-school-2013/) - We are pleased to announce that RBF Morph staff will be present at the PRACE Autumn Schoolon 23-27 September 2013. Don't miss this excellent chance to improve your knowledge in High Performance Calculation with a specific focus on industrial design! An overview about mesh morphing and its benefits will be given with a specific focus
- [RBF Morph at Automotive Simulation World Congress 2013](https://www.rbf-morph.com/130-aswc-2013/) - We are pleased to announce that RBF Morph staff will be present at the Automotive Simulation World Congress 2013 on 29-30 October 2013 in Frankfurt am Main, Germany. An excellent chance to meet us and discover how mesh morphing can boost Multi Objective Optimization (MMO) in the automotive field! An overview about mesh morphing and
- [RBF Morph at Automotive Simulation World Congress 2014 - Japan](https://www.rbf-morph.com/156-aswc-2013/) - We are pleased to announce that RBF Morph will be take part in the Automotive Simulation World Congress 2014 on 9-10 October 2014 in Tokyo, Japan. A great opportunity to join us and discover how mesh morphing can boost Fluent Adjoint in the automotive field and the new ACT module for ANSYS Mechanical developed by
- [RBF Morph at Aerospace Simulation Italian Conference](https://www.rbf-morph.com/134-rbf-morph-at-aero-2013/) - RBF Morph has been present at the Aerospace Simulation Italian Conference on the 16th April 2013 at ALENIA AERMACCHI Viale Dell'Aeronautica 80038 Pomigliano D'Arco - NA. We showed how RBF Morph can boost aircraft design: as a tool for multi physics analyses (including fluid structure interaction, and ice accretion modeling) and as a tool for
- [RBF Morph at EUROGEN 2013](https://www.rbf-morph.com/132-rbf-morph-at-euorogen-2013/) - An interesting paper involving the use of RBF Morph has been presented at 10th International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems – EUROGEN 2013 (Las Palmas de Gran Canaria, Spain, October 7 - 9, 2013). The paper "Optimization under Uncertainty using Adjoint Solver
- [RBF Morph published on "Computers and Fluids"](https://www.rbf-morph.com/139-rbf-morph-at-caf-2014/) - An article involving the use of RBF Morph having title "Sails trim optimisation using CFD and RBF mesh morphing" has been published on the journal "Computers and Fluids". Available online at:http://dx.doi.org/10.1016/j.compfluid.2014.01.007 DOI information: 10.1016/j.compfluid.2014.01.007. Full bibliographic details: Computers and Fluids 93C (2014), pp. 46-60. Abstract The study is focused on the use of mesh morphing
- [ANSYS Webinar November 14 2013](https://www.rbf-morph.com/133-ansys-webinar-2013/) - How to Boost Multi Objective Shape Optimization with Mesh Morphing Technologies from RBF Morph Thursday, November 14, 2013 11:00 am EST - 5:00 pm Europe Time (Berlin, GMT+01:00) Duration: 60 minutes Link to playback or download the November 14 session In this webinar, you will learn how to parameterize a CFD model for complex shape
- [RBF Morph published papers at ANSYS Italian UGM 2013](https://www.rbf-morph.com/124-rbf-morph-papers-at-2013/) - Two studies performed through the use of RBF Morph and presented at ANSYS Italian User Group Meeting 2013 were published. The first paper deals with aircrafts desing optimisation whilst the second one concerns the estimation of airfoil performances in presence of ice profile.
- [RBF Morph wins Best Paper Award at ANSYS ASWC 2013](https://www.rbf-morph.com/135-rbf-morph-awards-at-aswc-2013/) - RBF Morph was awarded for the "Best Use of HPC" during the closing ceremony of the ANSYS Automotive Simulation World Congress 2013 in Frankfurt. The award is given in recognition of the paper: "Advanced Mesh Morphing for Automotive Applications using RBF Morph", presented by Dr. Marco Evangelos Biancolini, University of Rome "Tor Vergata", Rome (Italy).
- [RBF Morph at IFASD 2013](https://www.rbf-morph.com/136-rbf-morph-at-ifasd-2013/) - An interesting paper involving the use of RBF Morph has been presented at the International Forum on Aeroelasticity & Structural Dynamics 2013 in Bristol UK. The paper "Collaborative HIRENASD analyses to eliminate variations in computational results" is available in the download area of this site or using a direct link. Abstract In this paper, the
- [RBF Morph presentations at PRACE Autumn School 2013](https://www.rbf-morph.com/137-prace-school-2013-presentations/) - The presentations held at the PRACE Autumn School on 23-27 September 2013 by the director of RBF Morph have been made available. The first one deals with an overview on mesh morphing with a specific focus on Radial Basis Functions (RBF) techniques and the industrial tool RBF Morph, whilst the second one concerns the hands-on
- [RBF Morph at ANSYS Hall of Fame 2014](https://www.rbf-morph.com/138-rbf-morph-at-ansys-hall-of-fame-alias/) - The University of Rome "Tor Vergata" in collaboration with RBF Morph participated to ANSYS Hall of Fame, the international competition promoted by ANSYS Inc. highlighting some of engineering's most complex design challenges. The application submitted deals with the simulation of ice accretion on three-dimensional aircraft wings.
- [Wind barriers optimisation using CFD and RBF mesh morphing](https://www.rbf-morph.com/140-rbf-morph-at-ljubljana-2014/) - A remarkable research activity about wind barriers for ground traffic protection optimization is running at the University of Ljubljana. In strict cooperation with the University of Rome "Tor Vergata", we have supported this study. RBF Morph allowed the parametrization of adjustable deflectors angles enabling a complex HPC optimization process. We see this result as an
- [Enginsoft, University of Rome Tor Vergata and RBF Morph commitment for the exploitation of mesh morphing technologies](https://www.rbf-morph.com/148-rbf-morph-and-enginsoft/) - We are very pleased to announce to our users, customers, partners and followers that Enginsoft company entered in 2014 into the technical partnership already existing between RBF Morph and University of Rome “Tor Vergata”. Such a strategic affiliation will enhance the integration of RBF Morph tool with commercial software products provided by Enginsoft with a twofold
- [RBF Morph invited at TechNet Alliance Spring Meeting 2014](https://www.rbf-morph.com/165-rbf-morph-at-technet-alliance/) - Prof.Marco Evangelos Biancolini was invited to present RBF Morph at the "TechNet Alliance Spring Meeting 2014" that will be held in Malta on April 11th and 12th. This is the first important step of the new cooperation between RBF Morph/University of Rome Tor Vergata and Enginsoft. The TechNet Alliance was founded in 1998 by a group
- [RBF Morph published on Newsletter Enginsoft Year 14 n.2](https://www.rbf-morph.com/152-rbf-morph-and-enginsoft/) - RBF Morph published on the Newsletter Enginsoft Year 14 n.2 an article on how the RBF Morph tool is able to reshape the CAE workflow by RBFs mesh morphing. Moreover, the Newsletter reports the announcement to Enginsoft's users, customers, partners and followers that Enginsoft company entered in 2014 into the technical partnership already existing between RBF
- [RBF Morph at ANSYS Brazilian UGM 2014](https://www.rbf-morph.com/rbf-morph-at-ansys-brazilian-ugm-2014/) - ANSYS User Group Meeting – Brazil that will be take place as from 19th to 21st of May in Sao Paulo (Brazil). An excellent chance to learn more about RBF mesh morphing and to understand how ANSYS Fluent CFD solver capabilities can be extended in several fields: shape parameterization as a tool for optimization and
- [RBF Morph at Applied Aerodynamics Conference 2014](https://www.rbf-morph.com/149-rbf-morph-at-applied-aerodyn-conf-2014/) - RBF Morph will have a speech at Advanced Aero Concepts, Design and Operations Applied Aerodynamics Conference 2014 that will be take place as from 22nd to 24th of July at the University of Bristol (UK), Faculty of Engineering. This biennial conference is organized by the Royal Aeronautical Society with the aim to present and discuss the aspects
- [RBF Morph at 4th Aircraft Structural Design Conference](https://www.rbf-morph.com/150-rbf-morph-at-4th-aircraft-structural-design-conference/) - RBF Morph will participate to 4th Aircraft Structural Design Conference taking place at Queen's University Belfast in Northern Ireland between 7th and 9th October 2014. This conference will address the challenges facing the designers of the next generation aircraft, and papers will cover current research focused on the design and manufacture of future civil and
- [RBF Morph at ANSYS Italian UGM 2014](https://www.rbf-morph.com/145-rbf-morph-at-italian-ugm-2014/) - RBF Morph will take part in ANSYS User Group Meeting – Italia that will be held on 22nd and 23rd of May at Gran Hotel Villa Torretta in Sesto San Giovanni (Milano). The director of RBF Morph company will have two speeches during the Meeting, one in the fluid dynamic session and one in the
- [RBF Morph presentations at ANSYS Italian UGM 2014](https://www.rbf-morph.com/151-rbf-morph-presentations-at-italian-ugm-2014/) - The presentations of the speeches that the director of RBF Morph company had at ANSYS Italian User Group Meeting 2014 concerning adjoint-morphing coupling and the ACT extension for ANSYS Mechanical can be downloaded in the reserved area of the RBF Morph's Website or through the links just provided in the text.
- [Article: "Virtual test bench for hemodynamic evaluation of aortic cannulation in cardiopulmonary bypass"](https://www.rbf-morph.com/269-article-11th-wccm-2014/) - The article the dealing with a virtual test bench for hemodynamic evaluation of aortic cannulation in cardiopulmonary bypass based on RBF mesh morphing and presented at 11th World Congress on Computational Mechanics that took place in Barcelona (Spain) in July from 20th to 25th 2014 is now downloadable in the reserver area of by means
- [RBF Morph at Italian International CAE Conference 2014](https://www.rbf-morph.com/157-rbf-morph-at-icc-2014/) - RBF Morph will join the 30th International CAE Conference that will be held in October on 27th and 28th in Pacengo del Garda - Verona. RBF Morph, now official partner of Enginsoft, will participate to the 2014 edition as exhibitor and will have two speeches. The first one is titled "How to boost Fluent Adjoint
- [RBF Morph at 4th EASN Association International Workshop](https://www.rbf-morph.com/158-rbf-morph-at-4th-easn/) - The RBF Morph team, in cooperation with the University of Rome Tor Vergata and as technical responsible of one of the Work Packages of the FP7 EU project RBF4AERO, will take part to the 4th EASN Association International Workshop on Flight Physics and Aircraft Design. This important three-day event will be held
- [Article: "An Efficient Approach to Simulating Ice Accretion on 2D and 3D Airfoils"](https://www.rbf-morph.com/159-article-ras-2014/) - The article of the studies presented at Advanced Aero Concepts, Design and Operations. Applied Aerodynamics Conference 2014, that took place in July at the University of Bristol, is now available in the download area for registered users or using a direct link. Abstract "An Efficient Approach to Simulating Ice Accretion on 2D and 3D Airfoils" Accurately
- [Article: "Store Separation: Theoretical Investigation of Wing Aeroelastic Response"](https://www.rbf-morph.com/160-article-asdc-2014/) - The article of the RBF mesh morphing based FSI analysis presented at 4th Aircraft Structural Design Conference that was held at Queen's University Belfast in Northern Ireland between 7th and 9th October 2014, can be downloaded by registered users in the reserved area or using a direct link. Abstract "Store Separation: Theoretical Investigation of
- [RBF Morph at GPU PROGRAMMING WITH CUDA Workshop](https://www.rbf-morph.com/219-rbf-morph-at-cuda-utv-2014/) - RBF Morph in collaboration with the University of Rome “Tor Vergata” is organizing the workshop ”GPU PROGRAMMING WITH CUDA MAKES CAE AS FAST AS VIDEOGAMES” that will be taken place on December 11th 2014 in the meeting room of the Department of Enterprise Engineering “Mario Lucertini” starting from 09:00. The market of videogames allowed to
- [Article: "A CFD-Based Wing Sail Optimisation Method Coupled to a VPP"](https://www.rbf-morph.com/263-article-5th-hpydc-2015/) - An article dealing with the optimisation of wing sail through a CFD-based method founded on RBF mesh morphing coupled to a Velocity Prediction Program (VPP) was submitted to the 5th High Performance Yacht Design Conference (HPYD5) that will be held in March from 10th to 12th 2014 at the University of Auckland. HYPD5 will cover
- [ANSYS Webinar March 20: Structural optimization through Mesh Morphing](https://www.rbf-morph.com/270-ansys-webinar-2015-03/) - RBF Morph ACT Extension presentation Friday, March 20, 2015 3:00 P.M. CET (Italy) Duration: 60 minutes Link to the recording Link to the presentation. We are pleased to announce that on 20th March a preview of our new RBF Morph ACT Extension will be given during a one hour webinar. Since this presentation is mainly
- [RBF Morph presentations at ANSYS 2015 Convergence USA](https://www.rbf-morph.com/154-rbf-morph-at-convergence-2015-santa-clara/) - RBF Morph will participate to ANSYS Convergence 2015 Regional Conference that will take place on April 21, 2015 at Hyatt Regency Santa Clara. The presentations will cover a variety of industries and will be done by ANSYS and industry-leading experts. RBF Morph will present with Ozen Engineering Inc. how engineers can use a fast morphing
- [RBF Morph Fluent Add-On V1.6 Released](https://www.rbf-morph.com/271-add-on-v16-released/) - The new version of our Fluent add-on has been released. This is the companion of Fluent 16 but Fluent 15 users can benefit as well of the improvements that we have introduced: - set-up can now be conducted in a parallel Fluent session - boosted performances of the RBF solver fast STL projection allows to
- [RBF Morph at CAE Optimisation Workshop in Bari](https://www.rbf-morph.com/162-rbf-morph-at-optimisation-ws-bari-2015/) - We are pleased to invite you at this free event that will be held on 5th of May at Politecnico di Bari. The workshop is hosted by Prof. Michele Ciavarella in the framework of the course "Optimization Method". University of Rome and Enginsoft will present advanced tools for optimisation (modeFRONTIER) and shape parametrisation (RBF Morph).
- [RBF Morph Training and Best Practices at ANSYS Italian UGM 2015](https://www.rbf-morph.com/276-rbf-morph-at-italian-ugm-2015/) - RBF Morph will take part in ANSYS User Group Meeting – Italia that will be held on 14th and 15th of May at Savoia Hotel Regency in Bologna. A specific RBF Morph Training and Best Practices Session is scheduled in the morning (11:30-13:00) of 15th of May. RBF Morph staff will give a technical update
- [Article: "Reliable mesh morphing approach to handle icing simulations on complex models"](https://www.rbf-morph.com/180-article-4th-easn-2014/) - The article concerning the icing simulations on complex models published in the proceedings of the 4th EASN Association International Workshop on Flight Physics and Aircraft Design, that took place in October from 27th to 29th 2014 in Aachen, can now be downloaded in the website reserved area or by means of the link. Abstract "Reliable
- [RBF Morph at Future Transport Challenges Workshop](https://www.rbf-morph.com/273-rbf-morph-at-future-trans-capua/) - The RBF Morph team in cooperation with the University of Rome Tor Vergata will take part to Future Transport Challenges Workshop - Energy Efficiency and Environment that will be held by CIRA (Centro Italiano Ricerche Aerospaziali) on April 23 and 24, 2015 in Capua. This workshop aims at discussing the technologies that will support companies in
- [RBF Morph at Automotive Simulation World Congress 2015 - Detroit](https://www.rbf-morph.com/277-aswc-2015/) - We are pleased to announce that RBF Morph will be take part in the Automotive Simulation World Congress 2015 on 2-3 June 2015 in Detroit, Michicagan, USA. A great opportunity to join us and discover how mesh morphing can boost Fluent in the automotive field and the new ACT Extension for ANSYS Mechanical developed by
- [Article: "RBF-based aerodynamic optimization of an industrial glider"](https://www.rbf-morph.com/161-article-cae-conf-2014/) - The article concerning the shape optimization study based on RBF Morph mesh morphing presented at 30th International CAE Conference that took place in October on 27th and 28th in Pacengo del Garda - Verona can be downloaded in the Presentations and Proceedings 2014 or by means of the link. Abstract "RBF-based aerodynamic optimization of an industrial glider" The
- [RBF Morph at Workshop HPC Methods for Engineering](https://www.rbf-morph.com/278-rbf-morph-at-cineca-scai-2015/) - The RBF Morph Team in collaboration with HSL Italia will present on June 17th "Virtual Automatic Rapid Prototyping on HPC Platforms + Fast Morphing tutorial" in the Workshop HPC Methods for Engineering organized by SuperComputing Applications and Innovations (SCAI), the High Performance Computing department of CINECA. This 45 minutes session
- [RBF Morph Presentations at ASWC 2015 on slideshare](https://www.rbf-morph.com/279-aswc-2015-presentations/) - We have published on slideshare the presentations given by RBF Morph at the Automotive Simulation World Congress 2015 on 2-3 June 2015 in Detroit, Michicagan, USA. Structural Optimization Using the New RBF Morph ANSYS ACT Extension Shape optimization is usually the final step in the design process of machine parts. Mesh morphing allows quick exploration
- [RBF Morph at the Fortissimo Forum 2015](https://www.rbf-morph.com/281-fortissimo-forum-2015/) - We are pleased to announce that RBF Morph will be take part in the second Fortissimo Forum 2015 on July 8 2015 in Amsterdam The Netherlands with the presentation "RBF Morph software - how to reshape the CAE workflows by Radial Basis Functions mesh morphing". The Forum will bring together Independent Software Vendors (ISVs), Service
- [RBF Morph at ASME Turbo Expo 2015](https://www.rbf-morph.com/280-rbf-morph-at-asme-turbo-expo-2015/) - Two applications of mesh morphing based on RBF Morph will be presented at ASME Turbo EXPO 2015 that will be take place from 15th to 19th of June at Palais De Congres in Montreal - Canada. Both papers are the result of a joint research between the University of Rome Tor Vergata (Italy), the University
- [RBF Morph at the 5th EASN Workshop](https://www.rbf-morph.com/284-easn-5th-2015/) - On 4 September 2015, the RBF Morph team, as partner of the FP7-AAT project RBF4AERO, will contribute to the 5th EASN International Workshop on Aerostructures that will be taking place at the University of Manchester, UK. In particular, two sessions will be held: in the first one an overview of the advances on ice accretion
- [RBF Morph at AIAS 2015 Conference](https://www.rbf-morph.com/283-rbf-morph-at-aias2015/) - At the Italian Conference AIAS 2015 on 2-5 of September in Messina we present two projects; the first project is an industrial application of SACMI based on RBF Morph and Ansys Mechanical: starting from a defined topology the paper shows how mesh morphing can be used to obtain the best shape in terms of component
- [RBF Morph supported ARION1 design](https://www.rbf-morph.com/282-arion-1-2015/) - RBF Morph supported the University of Liverpool Velocipede Team (ULV Team) that are attempting to break the land speed record for fastest human powered vehicle in September 2015 with the ARION1 Land Speed Bicycle. The ULV Team are a team of sixteen engineering students from the University of Liverpool who are engineering the ARION1 and
- [RBF Morph at the EUROGEN 2015](https://www.rbf-morph.com/285-eurogen-2015/) - As partner of the FP7-AAT project RBF4AERO, the RBF Morph team will take part in the 11th edition of the International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems, EUROGEN 2015, the will be held in Glasgow (UK), 14-16 September, 2015. A work concerning the
- [RBF Morph at Italian International CAE Conference 2015](https://www.rbf-morph.com/286-cae-conference-2015/) - RBF Morph will join the 31st International CAE Conference that will be taking place in October on 19th and 20th in Pacengo del Garda (Verona). Specifically two works will be presented. The first one is titled "Structural optimization of an automotive wheel rim through an RBF mesh morphing technique" and will be held in the
- [RBF Morph invited at TechNet Alliance Fall Meeting 2015](https://www.rbf-morph.com/287-rbf-morph-at-technet-alliance-2015/) - RBF Morph participated in "TechNet Alliance Fall Meeting 2015" that was held in October on 16th and 17th in Cascais (Portugal). During the meeting all the products based on the RBF mesh morphing technology were presented and the vision of the future applications as well as the development of such a well-established numerical approach for
- [ANSYS Webinar November 12 2015](https://www.rbf-morph.com/288-ansys-webinar-2015-11/) - Introducing the New Mesh Morphing ANSYS ACT Extension by RBF Morph Thursday, November 12 at 11:00 AM EST, 4:00 PM GMT Duration: 60 minutes In this webinar, you will learn about the main features of the RBF Morph ACT extension and discover how the RBF Morph ACT extension is integrated into ANSYS Mechanical’s GUI, sharing
- [RBF Morph downloadable in ANSYS Customer Portal](https://www.rbf-morph.com/289-rbf-morph-at-technet-alliance-2015/) - We are pleased to announce that now RBF Morph Fluent Add On 1.6 for 16.2 is also available on the portal of our OEM partner ANSYS. Are you interested in our groundbreaking technology? Contact us or your local ANSYS reseller.
- [Article: "Structural optimization of an automotive wheel rim through an RBF mesh morphing technique"](https://www.rbf-morph.com/290-article-31st-cae-conf-2015-paper/) - The article published in the proceedings of the 31st International CAE Conference, that took place in October 2015 from 19th to 20th in Lazise (Italy), can now be downloaded in the Presentations and Proceedings 2015. Such a paper describes the numerical optimization performed through the RBF Morph ACT Extension to re-shape an automotive wheel rim with the
- [Design Methods wins 2016 Hall of Fame competition using RBF Morph](https://www.rbf-morph.com/292-hall-of-fame-2016/) - Design Methods company won the 2016 Hall of Fame world competition in the session Corporate thanks to a groundbreaking application concerning the optimization of A-class catamaran that was accomplished through the coupled use of ANSYS Fluent and RBF Morph. In specific, a CFD sail analysis with an analytical velocity prediction program (VPP) was tuned against
- [RBF Morph ACT Extension in the ANSYS ACT Application Store](https://www.rbf-morph.com/293-rbf-morph-act-ansys-store/) - With great pleasure the RBF Morph team is glad to announce that the RBF Morph Extension with limited features now can be freely downloadable in the ANSYS ACT Application Store reachable through the ANSYS Customer Portal. Enjoy our technology and expand the boundaries of your analyses exploiting mesh morphing! . ANSYS ACT Application
- [RBF Morph at JCM 2016](https://www.rbf-morph.com/rbf-morph-at-jcm-2016/) - RBF Morph in collaboration with Design Methods Company will participate to The 7th Joint Conference of ADM -INGEGRAF - AIP PRIMECA – JCM 2016 taking place at Catania Italt between 14th and 16th September 2016. The JCM 2016 originates as the 8th Joint Conference of ADM (Associazione Nazionale Disegno e Metodi dell’Ingegneria Industriale) INGEGRAF (Asociación Española de Ingeniería
- [RBF Morph with Pipistrel at Engineering Playground](https://www.rbf-morph.com/rbf-morph-with-pipistrel-at-engineering-playground/) - The RBF Morph Team with Pipistrel will participate from March 21th to April 25th at Spazio Eventi Tirso in Rome “Engineering Playground” hosted by the exhibition of LEGO® sculptures. “The Art of the Brick”. For the Engineering Playground RBF Team with Pipistrel have prepared 3D printed models of aircrafts that allow to clearly understand how
- [RBF Morph published on the Newsletter EnginSoft Year 13 n°1](https://www.rbf-morph.com/rbf-morph-published-on-the-newsletter-enginsoft-year-13-n1/) - RBF Morph published on the Newsletter EnginSoft Year 13 n°1 – 64 an article on how the FEA tool ANSYS Mechanical in conjunction with the ACT Extension RBF Morph is able to overtake the limitations of the standard workflow based on the generation of a new mesh for each shape variation which is updated according
- [RBF Morph with HSL Italia at Engineering Playground](https://www.rbf-morph.com/rbf-morph-with-hsl-italia-at-engineering-playground/) - The RBF Morph Team with HSL Italia will participate from March 21th to April 25th at Spazio Eventi Tirso in Rome “Engineering Playground” hosted by the exhibition of LEGO® sculptures. “The Art of the Brick”. “Engineering Playground”, aims to tell a new and visionary approach toward engineering. It is addressed to young and less young
- [Shape optimisation powered by RBF Morph ACT Extension presented at modeFRONTIER International US 2016](https://www.rbf-morph.com/rbf-morph-at-modefrontier-international-us-2016/) - RBF Morph will join the 7th edition of the modeFRONTIER International Users' Meeting which will be held on 17th-18th May 2016 in Trieste. Riccado Cenni CAE Engineer of Sacmi Imola, will present in the INDUSTRY session a work titled “A CAD-mesh mixed approach to enhance shape optimization capabilities”. In this paper a methodology based on
- [RBF Morph at International CAE Conference 2016](https://www.rbf-morph.com/rbf-morph-at-italian-international-cae-conference-2016/) - RBF Morph will join the 32st International CAE Conference that will be taking place in October on 17th and 18th in Parma, Pagani Congressi (Italy). Three applications of RBF Morph technology will be presented. Two studies will be presented by Sacmi Imola while the third was carried out in collaboration with D'Appolonia SpA. The first
- [RBF Morph will be at TechNet Alliance Fall Meeting 2016](https://www.rbf-morph.com/rbf-morph-will-be-at-technet-alliance-fall-meeting-2016/) - RBF Morph will be at the TechNet Alliance Fall Meeting 2016 to be held on 14 and 15 October in Salsomaggiore Terme - Parma (Italy). During the meeting a study entitled “Shape optimisation of 3d printed high performances automotive parts” will be presented by Prof. Marco Evangelos Biancolini. This work was carried out in cooperation with
- [Article: "Geometric Parameterization Strategies for shape Optimization Using RBF Mesh Morphing"](https://www.rbf-morph.com/article-geometric-parameterization-strategies-for-shape-optimization-using-rbf-mesh-morphing/) - The article Geometric Parameterization Strategies for shape Optimization Using RBF Mesh Morphing presented at 7th Joint Conference of ADM –INGEGRAF – AIP PRIMECA – JCM 2016 that was held at Catania in Italy between 14th and 16th September 2016 can be download in the Presentations and Proceedings. Abstract Mesh morphing is one of the most promising approach for problems in which
- [Welcome to the new RBF Morph website](https://www.rbf-morph.com/welcome-to-the-new-rbf-morph-website/) - RBF Morph is very excited to announce the launch of our newly designed website, appealing, responsive, rich content, with a fresh new look. We wanted to make the new website faster, easier to navigate, and more user-friendly. The site’s homepage features bright colors and an uncluttered design and quick and easy access to essential information
- [Papers presented at ECCOMAS Congress 2016 are now available to download](https://www.rbf-morph.com/rbf4aero-at-the-2016-eccomas-congress-2/) - As partner of the RBF4AERO Consortium, the RBF Morph team participated in 2016 ECCOMAS (European Congress on Computational Methods in Applied Science and Engineering) Congress in Crete 5 to 10 June 2016. Three works presented on optimization strategies and procedures of RBF4AERO technology benchmark: adjoint-morphing coupling, fluid structure interaction, based optimization evolutionary algorithm and the strategies adopted
- [RBF Morph FSI capabilities](https://www.rbf-morph.com/rbf-morph-fsi-capabilities/) - If you want to learn more about the RBF Morph FSI capabilities and you take a closer look at what it covers read a short introduction that shows how to perform steady and transient fluid structures simulation by embedding structural modes in the Fluent CFD solvers. In tihis presentation besides an FSI capabilities overview RBF Morph,
- [Il ruolo del mesh morphing nella simulazione emodinamica in the journal A&C](https://www.rbf-morph.com/il-ruolo-del-mesh-morphing-nella-simulazione-emodinamica-in-the-journal-ac/) - The application of mechanical principles for solving biological problems has been dynamically expanding and CAE simulations have found effective application for biomechanics studies. In the new article published in the Italian journal “Analisi e Calcolo” n° 76 Sep. 2016 two important applications of the mesh morphing in biomechanics simulation, both in cases of hemodynamic are
- [RBF Morph published on Journal of Aerospace Engineering](https://www.rbf-morph.com/rbf-morph-published-on-journal-of-aerospace-engineering/) - An article involving the use of RBF Morph having title “Static Aeroelastic Analysis of an Aircraft Wind-Tunnel Model by Means of Modal RBF Mesh Updating " has been published on the journal “Journal of Aerospace Engineering” November 2016, Vol. 29, No. 6. Available online at http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29AS.1943-5525.0000627 (doi: 10.1061/(ASCE)AS.1943-5525.0000627) Authors: Biancolini, M., Cella, U., Groth, C., Genta, M. Abstract: A
- [Glider fuselage-wing junction optimization using CFD and RBF mesh morphing](https://www.rbf-morph.com/glider-fuselage-wing-junction-optimization-using-cfd-and-rbf-mesh-morphing/) - An article about the application of RBF Morph for the improvement of the aerodynamic performance of an industrial glider having title “Glider fuselage-wing junction optimization using CFD and RBF mesh morphing" has been published on the journal “Aircraft Engineering and Aerospace Technology” Volume 88 Issue 6. Available online at http://www.emeraldinsight.com/doi/abs/10.1108/AEAT-12-2014-0211 Authors: M. E. Biancolini, E. Costa, U. Cella, C. Groth, G. Veble, M. Andrejašič Abstract:
- [RBF Morph in CAE Conference proceedings](https://www.rbf-morph.com/rbf-morph-in-cae-conference-proceedings/) - The presentations presented by SACMI Imola at 32st International CAE Conference that was held at Parma in October on 17th and 18th can be download in the Presentations and Proceedings 2016. A CAD-MESH mixed approach to enhance shape optimization capabilities In this presentation a different approach to mix the goods of both the techniques and overtake their limitations
- [Reshaping the future of aircraft design: RBF4AERO at CAE Conference 2016](https://www.rbf-morph.com/reshaping-the-future-of-aircraft-design-rbf4aero-at-cae-conference-2016/) - In the PLENARY Session of CAE Conference 2016 the coordinator of the RBF4AERO project, Dr. Emiliano Costa (D’Appollonia), gave his keynote speech “Reshaping the future of aircraft design”. The final goal of the Project is the development of the RBF4AERO Benchmark Technology, namely a dedicated numerical platform and strategy capable to allow aeronautical design engineers
- [RBF Morph in Scientific Computing World](https://www.rbf-morph.com/rbf-morph-in-scientific-computing-world/) - We are pleased to inform you about the paper “Fortissimo launches service to broker HPC resources” published in the December 2016 Issue of Scientific Computing World. RBF Morph powered experiment “Cloud-based Additive Manufacturing” is presented as has been presented as a reference case study. Click here to read the full article!
- [Simulation improves the life of EGR Coolers](https://www.rbf-morph.com/simulation-improves-the-life-of-egr-coolers/) - A study about the application of RBF Morph for the shape optimization of the inlet diffusor having title “Optimizing the EGR for Even Cooling and Structural Stability” has been published on the Engineering.com. The optimizations were made possible by the engineers' ability to link the simulations to the CAD models and the design of experiments (DOE) through ANSYS
- [Shape optimization powered RBF Morph at Simulazione e prototipazione…due preziosi alleati per innovare!](https://www.rbf-morph.com/shape-optimizations-powered-rbf-morph-at-simulazione-e-prototipazionedue-preziosi-alleati-per-innovare/) - An RBF application will be presented in the speak "Fare innovazione con l'additive manufacturing: risvolti pratici e per il business" that will be given by HSL at the event Simulazione e prototipazione… due preziosi alleati per innovare! organised by Trentino Sviluppo in the framework Innovation Academy 2017 on 15th February, in Rovereto. HSL Italia, partner in EU
- [Esteco Webinar A CAD-mesh mixed approach to enhance shape optimization capabilities](https://www.rbf-morph.com/webinar-a-cad-mesh-mixed-approach-to-enhance-shape-optimization-capabilities/) - A CAD-mesh mixed approach leveraging modeFRONTIER and RBF Morph to enhance shape optimization capabilities Thursday, April 6th, 2017 4 PM CEST See conversion in your timezone On April 6th, ESTECO and RBF-Morph will host a joint webinar presenting an innovative CAD-Mesh mixed approach to enhance shape optimization capabilities. During the Webinar, Riccardo Cenni, CAE Engineer
- [Press Release: RBF Morph App for ANSYS Mechanical v180.1: the simply and fast solution for mesh morphing](https://www.rbf-morph.com/press-release-rbf-morph-app-for-ansys-mechanical-v180-1-the-simply-and-fast-solution-for-mesh-morphing/) - RBF Morph, the company providing fast mesh morphing tools, announces that a new version of RBF Morph App for ANSYS Workbench is going to be released. “Performances matter.” says Marco E. Biancolini, owner of RBF Morph, about it “A comparison between the new RBF solver and the past one registered a speed up that is
- [RBF Morph at Workshop HPC Methods for Engineering](https://www.rbf-morph.com/rbf-morph-at-workshop-hpc-methods-for-engineering/) - We are pleased to announce that Marco E. Biancolini, owner of RBF Morph, will be one of the trainers of the three days workshop (19-21 June 2017) at CINECA (Milan site) entitled Workshop HPC Methods for Engineering. The event is intended to collect a set of experiences from nowaday professional figures, coming from industry as
- [RBF Morph at Fortissimo 2](https://www.rbf-morph.com/rbf-morph-at-fortissimo-2/) - Fortissimo 2 is a successor of Fortissimo project and it continues to address the adoption of next generation ICT advances in the manufacturing domain. At the core of Fortissimo 2 are three tranches of Application Experiments (~35 in total). A key feature of Fortissimo 2 will be the adaption of the Marketplace to meet the
- [Shape optimisation powered by RBF Morph presented at WCSMO12](https://www.rbf-morph.com/shape-optimisation-powered-by-rbf-morph-presented-at-wcsmo12/) - A study using RBF Morph was presented at 12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), which held in Braunschweig, Germany from 5 June to 9 June 2017. Riccado Cenni CAE Engineer of Sacmi Imola presented a work titled Multidisciplinary shape optimization of ductile iron castings by considering local microstructure and material. In this
- [RBF Morph at the EUROGEN 2017](https://www.rbf-morph.com/rbf-morph-at-the-eurogen-2017/) - The RBF Morph Team with ESTECO and EnginSoft will take part in the 12th edition of the International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems, EUROGEN 2017, that will be held in Madrid (Spain), 13-15 September, 2017. A challenging application of RBF Morph technology will be
- [RBF Morph at AIAS Conference 2017](https://www.rbf-morph.com/3510-2/) - The RBF Morph Team will take part in the 46th edition of the Italian Conference AIAS 2017 that will be held in Pisa (Italy) 6-9 September, 2017. Three works about the different applications of RBF Morph technology will be presented: 913 – Ottimizzazione di forma mediante adjoint strutturale ed RBF mesh morphing Adjoint solvers are acquiring nowadays a
- [RBF Morph presentations at AIAS 2017](https://www.rbf-morph.com/rbf-morph-presentations-at-aias-2017/) - The presentations presented by RBF Morph team at 46th edition of the Italian Conference AIAS 2017 that was held in Pisa (Italy) 6-9 September, 2017 can be download in the Presentations and Proceedings 2017. The papers will be published shortly.
- [RBF Morph at the CAE Conference 2017](https://www.rbf-morph.com/rbf-morph-at-the-cae-conference-2017/) - RBF Morph will join the 33st International CAE Conference that will be taking place in November on 6th and 7th in Vicenza (Italy). Specifically three works will be presented. The first work titled “Hemo-Elastic study of ascending thoracic aorta aneurysms through RBF mesh morphing” describes an approach to perform parametric fluid-structure interaction (FSI) analyses of healthy subjects
- ["Modellazione interattiva integrando realtà aumentata, morphing geometrico e interfacce aptiche” in the journal A&C](https://www.rbf-morph.com/modellazione-interattiva-integrando-realta-aumentata-morphing-geometrico-e-interfacce-aptiche-in-the-journal-ac/) - A article about the main results of RBF4ARTIST project has been published on the Italian Journal “Analisi e Calcolo” January 2017. This project addresses an innovative topic: the interactive sculpting applied to CAE. The goal is to put in the hands of the designer a CAD tool that allow changing the shape of a component directly
- [RBF Morph at Flexible Engineering Workshop](https://www.rbf-morph.com/rbf-morph-at-flexible-engineering-workshop/) - RBF Morph in collaboration with University of Rome “Tor Vergata”, ANSYS Inc., and Design Methods is organizing the workshop titled “Flexible Engineering Toward Green Aircraft” that will be taken place on December 14th2017 in the meeting room of the Department of Enterprise Engineering “Mario Lucertini” starting from 09:00. The workshop comes as conclusion of two
- [RBF Morph at DICAr of the University of Pavia](https://www.rbf-morph.com/rbf-morph-at-dicar-of-the-university-of-pavia/) - We are pleased to announce that a seminar entitled "Fast Radial Basis Functions for Engineering Applications" will be given by Prof. M. E. Biancolini on 7 February 2018 at the Department of Civil Engineering and Architecture - DICAr of of the University of Pavia. The aim of this seminar is to put the interested attendees
- [RBF Morph at the ANSYS Innovation User Conference and Workshop 2018](https://www.rbf-morph.com/rbf-morph-at-the-ansys-innovation-user-conference-and-workshop-2018/) - RBF Morph will join the ANSYS Innovation User Conference and Workshop 2018 that will be taking place in May on 2th and 3th in Coventry (UK). The event will feature a day of presentations on 2nd May featuring a short plenary session before breaking into five parallel tracks covering: Fluids, Structures and Technology Showcase. On 3rd May
- [Fast Radial Basis Functions for Engineering Applications](https://www.rbf-morph.com/fast-radial-basis-functions-for-engineering-applications/) - We are so proud to announce that Marco E. Biancolini, owner of RBF Morph, has published a book titled "Fast Radial Basis Functions for Engineering Applications". It is presents the first “How To” guide to the use of radial basis functions (RBF). It provides a clear vision of their potential, an overview of ready-for-use computational
- [RBF Morph at the CAE Conference 2018](https://www.rbf-morph.com/rbf-morph-at-the-cae-conference-2018/) - RBF Morph took part in the 34th International CAE Conference that held in October on 8th and 9th in Vicenza (Italy). Specifically three works was presented. The first work titled “Combining Adjoint Optimization and mesh morphing for CFD applications” investigates the applicability of Adjoint optimization combined with mesh morphing to the industrial practice, by the integration of commonly used
- [RBF Morph at the Digital Innovation Hubs Annual Event 2018](https://www.rbf-morph.com/rbf-morph-at-the-digital-innovation-hubs-annual-event-2018/) - RBF Morph will join the Digital Innovation Hubs Annual Event 2018 that will be taking place in November on 27th and 28th in Warsaw (PL). The aim of the event co-organised by the European Commission, the Department of Innovation at the Polish Ministry of Entrepreneurship and Technology, and the EU-funded initiative I4MS is to reinforce the capacity of DIHs
- [Workshop "Flow Induced Vibrations"](https://www.rbf-morph.com/workshop-flow-induced-vibrations/) - We are pleased to announce that RBF Morph is supporting the upcoming Workshop "Flow Induced Vibrations". The Workshop held by Dr. Fabio Paglia from Avio SpA. will guest from the University of Rome “Tor Vergata” on November 27th. Detailed program: – Introduction to Avio company – Avio new product roadmap – Launch vehicle Buffeting during ascent phase –
- [Study on the Aerodynamic Performance of the High-Speed Train Head with Symmetrical and Asymmetric Nose Shape](https://www.rbf-morph.com/study-on-the-aerodynamic-performance-of-the-high-speed-train-head-with-symmetrical-and-asymmetric-nose-shape/) - The study conducted by Lanzhou Jiaotong University and Central South University using RBF Morph having title “Study on the Aerodynamic Performance of the High-Speed Train Head with Symmetrical and Asymmetric Nose Shape” has been published on the SAGE journals. Authors: Rui Li, Ping Xu, Shuguang Yao Key Abstract Aerodynamic drag reduction is one of the most important issues in the development of
- [Please join us at the ANSYS Innovation User Conference and Workshop 2019](https://www.rbf-morph.com/please-join-us-at-the-ansys-innovation-user-conference-and-workshop-2019/) - Please join us at the ANSYS Innovation User Conference and Workshop in Coventry on 22nd & 23rd May 2019. Don’t miss the chance to.. Meet Design Methods, partner of RBF Morph and winner of the ANSYS Hall of Fame 2016 world competition in the session Corporate. See a model of A-class catamaran and learn about a
- [Ottimizzazione fluido-struttura di velivoli industriali: il caso del P180 Avanti EVO](https://www.rbf-morph.com/ottimizzazione-fluido-struttura-di-velivoli-industriali-il-caso-del-p180-avanti-evo/) - A study about FSI optimization of industrial airplanes by RBF Morph Stand Alone has been published on the Italian journal “Analisi e Calcolo” n° 89 Nov 2018. We describe the procedure for the optimization of the fluid-structure interaction (FSI) carried out for the P180 Avanti EVO vehicle, designed and manufactured by Piaggio Aerospace, performed in
- [Software Simulation Award 2019](https://www.rbf-morph.com/software-simulation-award/) - Exciting news from the Italian Conference AIAS 2019.. The RBF Morph team wins the "Software Simulation Award" with the video "Automatic Shape Optimisation with RBF Mesh Morphing and the Biological Growth Method". This video demonstrates automatic shape optimisation driven by the stress solution according to the biological growth method. The industrial implementation is based on the
- [RBF Morph Speeds Real-Time Design-Data Feedback Critical to the Digital Twin in Industry and Research ANSYS](https://www.rbf-morph.com/rbf-morph-speeds-real-time-design-data-feedback-critical-to-the-digital-twin-in-industry-and-research-ansys/) - Rome, ITALY—October 24, 2019 —As engineers in industry and research look to develop Digital Twins of their physical products—with the longer-term goal of integration with the Industrial Internet of Things (IIoT)—the pivotal importance of up-front, accurate, real-time modeling and simulation to optimize both manufacturing and product performance is becoming very clear. Enabling the development of
- [RBF Morph at the Imaging, Modelling and Simulation in Biomechanics and Mechanobiology](https://www.rbf-morph.com/rbf-morph-at-the-imaging-modelling-and-simulation-in-biomechanics-and-mechanobiology/) - RBF Morph will join the event Imaging, Modelling and Simulation in Biomechanics and Mechanobiology as sponsor. Such an event is organized by “The Advanced International School” and it will be held in Rome (Italy) on February, 24th-28th, 2020. The School will instruct the audience on the importance of a rigorous
- [Simulazione multifisica per lo studio di stabilità aeroelastica di una vettura da competizione](https://www.rbf-morph.com/simulazione-multifisica-per-lo-studio-di-stabilita-aeroelastica-di-una-vettura-da-competizione/) - A joint study with Dallara about the flutter analysis of the front wing splitter mounted on the 2001 Le Mans Prototype car has been published on the Italian journal “Analisi e Calcolo” n° 94 September 2019. In the analysis and design of racing competition cars, numerical tools allow to investigate a wide range of solutions in short time
- [Mandible morphing through principal components analysis](https://www.rbf-morph.com/mandible-morphing-through-principal-components-analysis/) - A study conducted by University of Perugia in collaboration with University of Catania and Politecnico di Torino having title Mandible morphing through principal components analysis has been published on Proceedings of the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019. This work is focused on the creation of a parametric model of the mandibular bone, with the final
- [Flexible Engineering Toward Green Aircraft: CAE Tools for Sustainable Mobility](https://www.rbf-morph.com/flexible-engineering-toward-green-aircraft-cae-tools-for-sustainable-mobility/) - At the conclusion of the EU-funded RBF4AERO and RIBES projects, the University of Rome “Tor Vergata” decided to organize a one-day workshop aimed to present the results of the two programs and to highlight the status of researches in the aerospace field focusing on the recent achievements in analysis and design methodologies adopted in the
- [RBF Morph at ANSYS Simulation World](https://www.rbf-morph.com/rbf-morph-at-ansys-simulation-world/) - As gold sponsor RBF Morph will join at ANSYS Simulation World - June 10-11, 2020 - free online live event. Simulation World is a free online event designed to inspire and educate executives, engineers, R&D and manufacturing professionals about the transformative powers of engineering simulation and Ansys. Engage in a full and exhilarating experience including inspirational keynotes from
- [Radial Basis Functions Mesh Morphing](https://www.rbf-morph.com/radial-basis-functions-mesh-morphing/) - In the conference paper Radial Basis Functions Mesh Morphing presented at the ICCS International Conference on Computational Science 2020, a brief introduction about RBF mesh morphing is given with a special focus on the selection of the radial function. Among the many available options two well adopted ones have been considered in detail: the bi-harmonic spline (BHS) and
- [Advanced Radial Basis Functions Mesh Morphing for High Fidelity FSI with Known Movement of the Walls: Simulation of an Aortic Valve](https://www.rbf-morph.com/advanced-radial-basis-functions-mesh-morphing-for-high-fidelity-fsi-with-known-movement-of-the-walls-simulation-of-an-aortic-valve/) - In the conference paper titled Advanced Radial Basis Functions Mesh Morphing for High Fidelity Fluid-Structure Interaction with Known Movement of the Walls: Simulation of an Aortic Valve - ICCS International Conference on Computational Science 2020 - , a fast high fidelity workflow for a multi-physic Fluid-Structure Interaction analysis exploiting ANSYS Workbench and RBF Morph is given. High fidelity is gained
- [IOP Conference Series: Materials Science and Engineering](https://www.rbf-morph.com/modeling-flexiblecurved-pcbs-using-rbf-mesh-morphing/) - Modeling flexible/curved PCBs using RBF mesh morphing Abstract: In the recent past, flexible printed circuit board (PCB) electronics have seen a significant surge in many electronics products ranging from smartphone/watches that wrap around our wrists, displays that fold out as large television sets, reconfigurable electronics that conform to the roofs/trunks of cars or as flexible
- [IOP Conference Series: Materials Science and Engineering](https://www.rbf-morph.com/iop-conference-series-materials-science-and-engineering/) - CAD model update on as-built geometries with morphing technique: ITER winding pack Abstract: CAD and CAE model update on manufactured shapes is a key process in the industry 4.0, where design, manufacturing and maintenance are integrated elements. Digital Twin models, together with Reverse Engineering (RE) techniques, allow tracking components performances during production and verifying the
- [AIAS 2021 Software Simulation Award](https://www.rbf-morph.com/rbf-morph-with-university-of-rome-tor-vergata-win-aias-2021-software-simulation-award/) - Exciting news from the Italian Conference AIAS 2021! RBF Morph team and University of Rome Tor Vergata just won the "Software Simulation Award 2021" with the video "Analysis of vortex induced vibration of thermowell by high fidelity FSI numerical simulation analysis based on RBF structural modes embedding". A FSI approach based on modes superposition is proposed
- [Combining Analytical Models and Mesh Morphing Based Optimization Techniques for the Design of Flying Multihulls Appendages](https://www.rbf-morph.com/combining-analytical-models-and-mesh-morphing-based-optimization-techniques-for-the-design-of-flying-multihulls-appendages/) - An interesting paper titled Combining Analytical Models and Mesh Morphing Based Optimization Techniques for the Design of Flying Multihulls Appendages has been published on Journal of Sailing Technology volume 6, issue 1, February 2021. https://doi.org/10.5957/jst/2021.6.1.151 This paper presents a numerical optimization procedure suitable for foiling multihulls. As a proof of concept, it reports, as an application,
- [Gemello digitale in sala operatoria](https://www.rbf-morph.com/gemello-digitale-in-sala-operatoria/) - An interesting paper titled Gemello digitale in sala operatoria has been published on the Italian journal “Analisi e Calcolo” n° 107 November/December 2022. This study presents a steady-state CFD simulation of an operating theater with the aim of obtaining, in real-time, the variables of interest associated with any change in the room. This is possible
- [EuroHPC Summit Week 2022](https://www.rbf-morph.com/eurohpc-summit-week-2022/) - RINA on behalf of RBF Morph, InSilicoTrials Technologies, BioCardioLab at Fondazione Toscana Gabriele Monasterio and CINECA, is delighted to represent the Copernicus project in the EuroHPC Summit Week 2022 held in Paris. Copernicus, whose extended title is “Cloud-Based HPC Platform to support Systemic-Pulmonary Shunting Procedures”, aims to set up an affordable decision support web application, whose workflow
- [Digital Twin for Airflow and Drug Delivery in Human Airways](https://www.rbf-morph.com/5634-2/) - We are happy to announce an exciting news. Our proposal titled “digital twin for human lungs” was accepted for funding in the FF4EuroHPC 2nd call. The funding call targets proposals built around innovation targets arising from the use of advanced HPC. The aim of the project is to create a digital twin of human lungs,
- [32nd Symposium on Fusion Technology (SOFT 2022)](https://www.rbf-morph.com/32nd-symposium-on-fusion-technology-soft-2022/) - A research work powered by RBF Morph has been presented from University of Roma Tor Vergata at the 32nd Symposium on Fusion Technology (SOFT 2022). The event is organised by the Ruđer Bošković Institute (RBI), Croatia’s leading scientific institute in natural and biomedical sciences as well as marine and environmental research. The biennial symposium on fusion
- [An RBF Meshless Approach to Evaluate Strain Due to Large Displacements in Flexible Printed Circuit Boards](https://www.rbf-morph.com/an-rbf-meshless-approach-to-evaluate-strain-due-to-large-displacements-in-flexible-printed-circuit-boards/) - We are pleased to announce that our paper entitled RBF Meshless Approach to Evaluate Strain Due to Large Displacements in Flexible Printed Circuit Boards has been published on Micromachines 2022. The paper can be downloaded at the following link: https://doi.org/10.3390/mi13081163 Abstract Thin plates are very often employed in a context of large displacements and rotations, for example,
- [Workshop “Digital Twins For Aerospace”](https://www.rbf-morph.com/workshop-digital-twins-for-aerospace/) - The University of Rome “Tor Vergata” will guest the workshop titled “Digital Twins For Aerospace“. The event is organized by Marco Evangelos Biancolini and Ubaldo Cella, respectively professor of Machine Design and researcher at the Enterprise Engineering department “Mario Lucertini”.Professors and engineers, active in EU research programs, from academic, industry and research institutions, will provide
- [New papers published in Futurities](https://www.rbf-morph.com/a-new-papers-published-by-futurities/) - We are pleased to announce that two articles describing studies where RBF Morph was involved have been published by Futurities: Optimizing the shape of the M10 engine’s injector head methane circuit using RBF mesh morphing and Preliminary thermo-mechanical design, simulation and optimization of LAD on board the eXTP space mission. The first article is about
- [Development of a Three-Dimensional Statistical Shape Model of the Human Mandible](https://www.rbf-morph.com/development-of-a-three-dimensional-statistical-shape-model-of-the-human-mandible/) - 3D patient-specific computer models are a powerful tool for surgical planning, but generating them is time-consuming and expensive. Statistical shape models (SSMs) can provide a solution, as they can capture anatomical variations and represent different shapes in a parameterized manner. RBF Morph provides a stand alone software managed by Python. The software was used for
- [Optimization of the Airbox of Formula SAE car](https://www.rbf-morph.com/optimization-of-the-airbox-of-formula-sae-car/) - In her thesis "Optimization of the Airbox of a Formula SAE car" Giulia Sforza uses CFD simulations and mesh morphing tools to optimize the airbox performances. The aim of the project was to develop a new model of airbox for the 2010 car starting from the analysis of the previous one (2009) and understanding through
- [Digital Twins and Medicine 4.0: from in silico simulations to patient specific solutions](https://www.rbf-morph.com/digital-twins-medicine-4-0/) - Our Founder and CTO Prof. Marco Evangelos Biancolini recently held a lecture on 'Digital Twins & Medicine 4.0' as a guest of the seminar 'Polymeric heart valve replacements' organized by the University of Sydney, Australia. Biancolini, Associate Professor of Machine Design at Università Tor Vergata in Rome, Italy, explored the theme of the medical digital twin
- [Structural optimisation of the DEMO alternative divertor configurations based on FE and RBF mesh morphing](https://www.rbf-morph.com/structural-optimisation-of-the-demo-alternative-divertor-configurations-based-on-fe-and-rbf-mesh-morphing/) - We are pleased to announce that our research article 'Structural optimisation of the DEMO alternative divertor configurations based on FE and RBF mesh morphing' which was just published by Heliyon Journal. Learn how we used the RBF Morph technology to optimize the DEMO magnets. Static membrane stress levels during magnetization could be reduced significantly from
- [RBF Morph and LS-DYNA for car optimization](https://www.rbf-morph.com/rbf-morph-and-ls-dyna-for-car-optimization/) - RBF Morph is a pioneer and leader in mesh morphing technology, which is now integrated with LS-DYNA and ANSYS Workbench and Mechanical for crashworthiness optimization. The integration of RBF Morph and LS-DYNA provides the ability to explore shape variants without recreating a new model, reusing the FEA model of a similar car at an early-stage
- [Structural Optimization of an Automotive Wheel Rim](https://www.rbf-morph.com/structural-optimization-of-an-automotive-wheel-rim/) - In his thesis 'Structural Optimization of an Automotive Wheel Rim' Luca Cerniglia showed the advantages of using RBF Morph Structures to help optimize the shape of a car wheel rim. Abstract: The following work aims to carry out a structural analysis and subsequent shape optimization of an automotive wheel rim. The TÜV Rheinland certification and
- [RBF Morph at the Ansys UK Innovation Conference 2023](https://www.rbf-morph.com/rbf-morph-at-the-ansys-uk-innovation-conference-2023/) - The UK Innovation Conference is back on April 27-28, 2023, co-located with the Ansys Motor-CAD European User Conference. Join Ansys and RBF Morph for this free 1 or 2-day event giving you the opportunity to: Gain insight into Ansys' engineering simulation strategy and product release news covering Structures, Fluids, Electronics, Material Intelligence, Digital Twin, Optimisation,
- [RBF Morph at the CADFEM Ansys Simulation Conference Rapperswil 2023](https://www.rbf-morph.com/rbf_morph_at_the-cafdem_ansys_simulation_conference_rapperswil_2023/) - If you want to discover the latest trends and innovations in numerical simulation, you can't miss the CADFEM Ansys Simulation Conference that will take place in Rapperswil, Switzerland, on June 15th, 2023. RBF Morph will be there! This is a unique event on simulation! We look forward to the return to the popular face-to-face format of
- [Una soluzione per l’ottimizzazione di forma](https://www.rbf-morph.com/una-soluzione-per-lottimizzazione-di-forma/) - Published on September 2010 Issue of the Italian Magazine “A&C Analisi e Calcolo”. Download the PDF
- [Mesh Morphing Accelerates Design Optimization](https://www.rbf-morph.com/mesh-morphing-accelerates-design-optimization/) - Published on the ANSYS Advantage Magazine – Volume IV, Issue 1, 2010, Web Exclusives Section. Download the PDF
- [Il parabrezza variotouring](https://www.rbf-morph.com/il-parabrezza-variotouring/) - Published on March 2010 Issue of the Italian Magazine “Mototecnica”. Download the PDF
- [Mesh Morphing: sincronizzare le forme CAD e CAE](https://www.rbf-morph.com/mesh-morphing-sincronizzare-le-forme-cad-e-cae/) - Published on the Italian Journal “Il Progettista Industriale” Nov 2012. Download the PDF
- [Il metodo 50:50:50. Ottimizzazione aerodinamica della Volvo XC60](https://www.rbf-morph.com/il-metodo-505050-ottimizzazione-aerodinamica-della-volvo-xc60/) - Published on the Italian Journal “Ingegneria dell’autoveicolo” VOL. 65 N.7/8 Jul/Aug 2012. Download the PDF
- [Higher speed CFD](https://www.rbf-morph.com/higher-speed-cfd/) - Published on April 2012 Issue of Professional Motorsport World Magazine. Download the PDF
- [Tecniche di “mesh morphing” per l’ottimizzazione in campo aeronautico](https://www.rbf-morph.com/tecniche-di-mesh-morphing-per-lottimizzazione-in-campo-aeronautico/) - Published on May 2013 Issue of the Italian Magazine “A&C Analisi e Calcolo”. Download the PDF
- [Shaping Up](https://www.rbf-morph.com/shaping-up/) - Published on the ANSYS Advantage Magazine – Volume VII, Issue 1, 2013. Download the PDF
- [Alla ricerca delle regolazioni ottimali di una barca a vela mediante il mesh morphing](https://www.rbf-morph.com/alla-ricerca-delle-regolazioni-ottimali-di-una-barca-a-vela-mediante-il-mesh-morphing/) - Published on May 2014 Issue of the Italian Magazine “A&C Analisi e Calcolo”. Download the PDF
- [Voglia di record: il progetto “ARION1 Land Speed Bicycle” dell’Università di Liverpool](https://www.rbf-morph.com/voglia-di-record-il-progetto-arion1-land-speed-bicycle-delluniversita-di-liverpool/) - Published on July 2015 Issue of the Italian Magazine “A&C Analisi e Calcolo”. Download the PDF
- [Il ruolo del mesh morphing nella simulazione emodinamica](https://www.rbf-morph.com/il-ruolo-del-mesh-morphing-nella-simulazione-emodinamica/) - Published on September 2016 Issue of the Italian Magazine “A&C Analisi e Calcolo”. Download the PDF
- [Lighter mechanical components using mesh morphing](https://www.rbf-morph.com/lighter-mechanical-components-using-mesh-morphing/) - Published on the the Newsletter EnginSoft Year 13 n°1 Mar 2016 Download the PDF
- [Modellazione interattiva integrando realtà aumentata, morphing geometrico e interfacce aptiche](https://www.rbf-morph.com/modellazione-interattiva-integrando-realta-aumentata-morphing-geometrico-e-interfacce-aptiche/) - Published on January 2017 Issue of the Italian Magazine “A&C Analisi e Calcolo”. Download the PDF
- [Ridurre le concentrazioni di tensione con il mesh morphing](https://www.rbf-morph.com/ridurre-le-concentrazioni-di-tensione-con-il-mesh-morphing/) - Published on July 2017 Issue of the Italian Magazine “A&C Analisi e Calcolo”. Download the PDF
- [Foiling a-class catamarans application of cutting-edge technologies to improve sailing performance](https://www.rbf-morph.com/foiling-a-class-catamarans-application-of-cutting-edge-technologies-to-improve-sailing-performance/) - Published on the the Newsletter EnginSoft Year 14 n°3 Autumn 2017 Download the PDF
- [Ottimizzazione di componenti stampati in 3D per il miglioramento delle prestazioni di autovetture sportive](https://www.rbf-morph.com/ottimizzazione-di-componenti-stampati-in-3d-per-il-miglioramento-delle-prestazioni-di-autovetture-sportive/) - Published on March 2018 Issue of the Italian Magazine “A&C Analisi e Calcolo”. Download the PDF
- [Medical Digital Twins used to help predict pathology evolution and the effect of surgical corrections in cardiovascular patients](https://www.rbf-morph.com/medical-digital-twins-used-to-help-predict-pathology-evolution-and-the-effect-of-surgical-corrections-in-cardiovascular-patients/) - Published on the the EnginSoft Newsletter EnginSoft Year 15 n°4 Winter 2018 Download the PDF
- [SACMI designs optimized next-generation components using automated surface sculpting](https://www.rbf-morph.com/sacmi-designs-optimized-next-generation-components-using-automated-surface-sculpting-2/) - Published on the the EnginSoft Newsletter Year 16 n°3 Autumn 2019 Download the PDF
- [Testing the potential to offer CAE over the cloud in the SaaS paradigm](https://www.rbf-morph.com/testing-the-potential-to-offer-cae-over-the-cloud-in-the-saas-paradigm-2/) - Published on the the EnginSoft Newsletter Year 16 n°2 Summer 2019 Download the PDF
- [Simulazione multifisica per lo studio di stabilità aeroelastica di una vettura da competizione](https://www.rbf-morph.com/simulazione-multifisica-per-lo-studio-di-stabilita-aeroelastica-di-una-vettura-da-competizione-2/) - Published on September 2019 Issue of the Italian Magazine “A&C Analisi e Calcolo” Download the PDF
- [Tools and methodologies for generating digital twins in medical research](https://www.rbf-morph.com/tools-and-methodologies-for-generating-digital-twins-in-medical-research-2/) - Published on the EnginSoft Newsletter Year 17 n°2 Summer 2020 Download the PDF
- [Ottimizzazione di un componente motociclistico attraverso il biological Growth method](https://www.rbf-morph.com/ottimizzazione-di-un-componente-motociclistico-attraverso-il-biological-growth-method-2/) - Published on the Italian journal “Analisi e Calcolo” n°100,September 2021. Download the PDF
- [A natural remedy for hot-spot stresses](https://www.rbf-morph.com/a-natural-remedy-for-hot-spot-stresses-2/) - Published on the EnginSoft Newsletter Year 18 n°1 Spring 2021. Download the PDF
- [Aero packs in good shape with advanced mesh morphing](https://www.rbf-morph.com/aero-packs-in-good-shape-with-advanced-mesh-morphing-2/) - Published on the EnginSoft Newsletter Year 18 n°2 Summer 2021. Download the PDF
- [Reshaping the Tokamak TF Coil of DEMO with high fidelity multi physics CAE and advanced mesh morphing](https://www.rbf-morph.com/reshaping-the-tokamak-tf-coil-of-demo-with-high-fidelity-multi-physics-cae-and-advanced-mesh-morphing-2/) - Published on the EnginSoft Newsletter Year 18 n°3 Autumn 2021. Download the PDF
- [Using high-fidelity FSI simulation and advanced mesh morphing to simulate and mitigate vortex-induced Vibrations](https://www.rbf-morph.com/using-high-fidelity-fsi-simulation-and-advanced-mesh-morphing-to-simulate-and-mitigate-vortex-induced-vibrations-2/) - Published on the EnginSoft Newsletter Year 18 n°4 Winter 2021. Download the PDF
- [Preliminary thermo-mechanical design, simulation and optimization of LAD on board the eXTP space mission](https://www.rbf-morph.com/preliminary-thermo-mechanical-design-simulation-and-optimization-of-lad-on-board-the-extp-space-mission/) - Published on the Futurities EnginSoft Newsletter Year 19 n. 4 Winter 2022 Download the PDF
- [Optimizing the shape of the M10 engine’s injector head methane circuit using RBF mesh morphing](https://www.rbf-morph.com/optimizing-the-shape-of-the-m10-engines-injector-head-methane-circuit-using-rbf-mesh-morphing/) - Download the PDF
- [Press Release: I have heard that with fusion we can have our own stars](https://www.rbf-morph.com/press-release-i-have-heard-that-with-fusion-we-can-have-our-own-stars/) - Press release: Thermonuclear fusion is currently considered by all the most advanced countries as one of the best options for guaranteeing a large-scale, safe, environmentally friendly and practically inexhaustible source of energy. Research on this matter sees all the most technologically advanced countries involved in an international effort aimed at the construction of the experimental
- [RBF Morph ACT Extension V1.0 released](https://www.rbf-morph.com/272-demo-act-extension-announcment/) - We are pleased to announce that our new product "RBF Morph ACT Extension" has been released. The new technology is powered by the numerical engine of RBF Morph and is embedded in ANSYS Workbench. The first version of the tool, developed through the ACT customization platform of ANSYS, comes with full support of ANSYS Mechanical.
- [Press release May 2013: RBF Morph Engage a License and Distribution Agreement with ANSYS, Inc.](https://www.rbf-morph.com/129-rbf-morph-ansys-oem/) - RBF Morph, providing the world’s fastest mesh morphing tool, announces that thanks to a license and distribution agreement in place with ANSYS Inc., the RBF MorphTM add-on for ANSYS® Fluent® is now directly available from ANSYS. As demonstrated in several industrial applications, the awarded Radial Basis Functions Mesh Morphing Technology enables shape optimization of top
- [RBF Morph in the IGI Global Handbook "Computational Science and Engineering"](https://www.rbf-morph.com/110-igi-global-handbook/) - We are pleased to announce that a chapter about RBF Morph has been included in the IGI Global Handbook of Research on Computational Science and Engineering: Theory and Practice (2 vol). "Mesh Morphing and Smoothing by Means of Radial Basis Functions (RBF): A Practical Example Using Fluent and RBF Morph" Abstract Radial Basis Functions (RBF)

## Pages

- [Home](https://www.rbf-morph.com/) - Unleash the power of mesh morphing A new way to optimize your product’s performance Discover More Scroll Down Slide BackgroundUNLEASH THE POWER OF MESH MORPHINGA NEW WAY TOOPTIMIZE YOUR PRODUCT’S PERFORMANCEStep 1To change the background click on the label bar and in the layer window select the style tab. Step 2Choose a source from the
- [Ansys RBF Morph Structures](https://www.rbf-morph.com/rbf-morph-structures/) - Ansys RBF Morph Structures is an ACT extension of RBF Morph that enables shape optimization studies entirely within ANSYS Mechanical and ANSYS Workbench by morphing an existing mesh Optimize structures by morphing existing, trusted meshes An ACT extension powered by RBF Morph’s high-performance numerical engine, with full support for Ansys Mechanical.This new add-on has been
- [Ansys RBF Morph Fluids](https://www.rbf-morph.com/rbf-morph-fluids/) - Ansys RBF Morph Fluids is an add-on that enables shape optimization studies entirely within ANSYS Fluent by morphing an existing mesh Optimize shapes by morphing existing, trusted meshes This new approach leverages Ansys Fluent’s advanced CFD technology and overcomes the limitations of conventional methods by introducing new functionalities through dedicated routines implemented directly within the
- [Projects](https://www.rbf-morph.com/projects/) - SafeBot4Twin SafeBot4Twin is an innovative project that combines cybersecurity and artificial intelligence to enable safe… Read More PANDORA PANDORA is an EU‑funded initiative charting a new course for cardiovascular surgery… Read More ROMed2VR ROMed2VR is an initiative focused on advancing pre-surgical planning for congenital heart defects… Read More LESSICE The LESSICE project represents a significant
- [Our RBF Technology](https://www.rbf-morph.com/our-rbf-tecnology/) - The aim of the RBF Morph technology is to enable fast mesh morphing through a mesh-independent approach based on state-of-the-art Radial Basis Function (RBF) techniques. This technology allows the CFD user to perform shape modifications that are compatible with the mesh topology directly during the solving stage, simply by adding a single command line to
- [About Us](https://www.rbf-morph.com/about/) - RBF Morph is a pioneer in providing cutting-edge, reliable and high-performance mesh morphing technology for CAE multiphysics modeling and digital twin design. Since 2007 our dedicated team of engineers and experts in computer simulation has been key to creating innovative and unique solutions that can optimise any product’s shape, increasing mechanical and aerodynamic performances, while
- [Projects](https://www.rbf-morph.com/projects-2/) - DigiPAD The EU-funded DigiPAD project (Digital Twin for Advanced Design in the Aerospace Industry) represents … Read More Ditaid CFD can be used to assess airflow and improve the efficiency of inhaled drug delivery in human lungs… Read More Copernicus Project Congenital heart diseases (CHDs) account for nearly one-third of all congenital birth defects. Without…
- [All Industries](https://www.rbf-morph.com/all-industries/) - Automotive Aerodynamics development is all about trade-offs, striking the right balance between styling needs… Read More Aerospace Today, all the modern manufacturing enterprises are striving to develop the best optimized, reduced… Read More Marine and nautical Marine industry is driven by the needs for reduced manufacturing and operating costs, shorter… Read More Energy Electricity production
- [Case Studies](https://www.rbf-morph.com/case-studies/) - Automotive Le Mans Prototype Car Read More Machinery Components Optimization of Industrial Parts Read More Energy Update of CAE Models Read More Medical Mandible Morphing Read More Aerospace Aircraft Design Optimization Read More Automotive Optimization of an Automotive Wheel Rim Read More Automotive Optimization of a Motorbike Windshield Read More Automotive MIRA Reference Car Read
- [Partnerships](https://www.rbf-morph.com/partnership/) - ANSYS Inc.RBF Morph has been an ANSYS’s partner since 2009 when it became its official software partner entering the ANSYS Partnership Programme. Since the inception of this technical partnership, many targets have been achieved to the high integration of RBF Morph with the CFD solver ANSYS Fluent and its adjoint solver. To date, RBF Morph also enjoys the full integration with ANSYS© Workbench™
- [Automotive](https://www.rbf-morph.com/automotive/) - Aerodynamics development is all about trade-offs, striking the right balance between styling needs and aerodynamic concerns. Nearly all major automotive and truck manufacturers use computational fluid dynamics (CFD) during the development process to evaluate aerodynamic drag of proposed vehicle designs. The analysis results shed considerable light on the impact of styling choices on aerodynamic performance,
- [Optimization of Industrial Parts by Mesh Morphing-Enabled Automatic Shape Sculpting](https://www.rbf-morph.com/optimisation-of-industrial-parts-by-mesh-morphing-enabled-automatic-shape-sculpting/) - Radial basis functions (RBF) mesh morphing is a well established approach to quickly update an existing finite element analysis (FEA) mesh so that new shapes can be adapted and related performances explored. The RBF in fact allow to adapt the volume mesh maintaining a good quality even for substantial changes of the shape. New shapes
- [Multiphysics Numerical Investigation on the Aeroelastic Stability of a Le Mans Prototype Car](https://www.rbf-morph.com/multiphysics-numerical-investigation-on-the-aeroelastic-stability-of-a-le-mans-prototype-car/) - In this joint work with Dallara “Multiphysics numerical investigation on the aeroelastic stability of a Le Mans Prototype car” the flutter analysis of the front wing splitter mounted on the 2001 Le Mans Prototype car by Dallara (LMP1) is presented.In the analysis and design of racing competition cars, numerical tools allow to investigate a wide
- [Motorsport](https://www.rbf-morph.com/motorsport/) - In our competitive global society, successful and economical design of automotive and industrial structures is crucial. Optimizing the geometry of individual pieces of complex machines improves performance and efficiency of the entire device. Shape optimization problems are typically solved by minimizing the cost function, a mathematical formula that predicts the losses (or ‘cost’) corresponding with
- [Marine and Nautical](https://www.rbf-morph.com/marine-and-nautical/) - Marine industry is driven by the needs for reduced manufacturing and operating costs, shorter product development cycles and design improvements. Such exigent scenarios pave way for innovative product engineering.CFD analysis can optimize ship hull design, sail shape and propeller blades. Analysis predicts water free surface around the ship hull which helps to accomplish optimal hull
- [Aerospace](https://www.rbf-morph.com/aerospace/) - Today, all the modern manufacturing enterprises are striving to develop the best optimized, reduced weight and cost effective products that meet the intended design functionality and reliability. In this scenario, structural optimization tools like topology and shape optimization with manufacturing simulations are becoming attractive in product design processes.These tools also in help reducing product development
- [Energy](https://www.rbf-morph.com/energy/) - Electricity production from renewable resources, efficient energy production, and optimization of energy consumption, emission reduction and introduction of modern highly efficient technologies belongs are among the priorities of the RBF Morph team. Numerical simulation has a huge potential to be one of the essential tools for the development of new innovative solutions for energy production
- [Medical](https://www.rbf-morph.com/medical/) - Engineering applications involving biological fluids have highly transversal requirements in terms of domain definition from clinical images, complex flow conditions, fluid rheological properties, structure motion and deformation, visualization and post-processing of the results. For these reasons, and thanks to the enormous developments of computational sciences, a computer-aided–engineering workflow seems to be a possible elective environment
- [Electronics](https://www.rbf-morph.com/electronics/) - Driving Innovation: Mesh Morphing Solutions for the Electronics and Electric Industries Explore the future of electronics and e-motors components design with the integration of mesh morphing technology. At our core, we don’t just provide software; we offer tailored solutions. We understand the complexities of specific industrial challenges and aim to solve them through the seamless
- [Contact](https://www.rbf-morph.com/contact/) - Get In Touch Your Name and Surname Your Company Your Email Subject Your message Do you need support? For questions regarding our products and services please contact us at info@rbf-morph.com For questions regarding technical support please contact us at support@rbf-morph.com Follow Us Linkedin Youtube X-twitter Facebook
- [Testimonials](https://www.rbf-morph.com/testimonials/) - State-of- the- art morphing technology available with seamless integration to the ANSYS FLUENT community. Send Your Message How to Contact Us Write to us info@rbf-morph.com Our Location Via Antonio Rosmini, 4, 00040 Monte Compatri RM
- [Cookie Policy](https://www.rbf-morph.com/cookie-policy/) - Cookie Policy for RBF Morph This is the Cookie Policy for RBF Morph, accessible from www.rbf-morph.com What Are Cookies Cookies are small text files that can be used by websites to make a user's experience more efficient. The law states that we can store cookies on your device if they are strictly necessary for the
- [RBF Stand Alone](https://www.rbf-morph.com/rbf-stand-alone/) - The Stand Alone version of RBF Morph has been conceived to generalize the usage of this technology to allow its utilization – whenever mesh nodes data are reachable and modifiable in some manner – no matter the numerical solver.It is supplied with a customizable GUI based on the CGNSplot technology and, since this product shares
- [Awards](https://www.rbf-morph.com/awards/) - AIAS 2021 Software Simulation AwardThe RBF Morph team and the University of “Rome” Tor Vergata win the “Software Simulation Award” at the Italian Conference AIAS 2021 with the video “Analysis of vortex induced vibration of thermowell by high fidelity FSI numerical simulation analysis based on RBF structural modes embedding“.A FSI approach based on modes superposition is proposed and implemented
- [Presentations and Proceedings](https://www.rbf-morph.com/presentations-and-proceedings/) - 2023 This page lists the procedures of congresses and other materials presented at the events and conferences in 2023. Click to Browse 2022 This page lists the procedures of congresses and other materials presented at the events and conferences in 2022. Click to Browse 2021 This page lists the procedures of congresses and other materials
- [Presentation given at Workshop HPC for Industry 4.0@Cineca is now available to download](https://www.rbf-morph.com/presentation-given-at-workshop-hpc-for-industry-4-0cineca-is-now-available-to-download/) - RBF Morph took part in the Workshop HPC for Industry 4.0@Cineca that was held in Doria Gran Hotel Milan (MI) 21-23 May, 2019. The aim of the workshop was to present state-of-the-art Industry 4.0 technologies. In particular, here were presented methods and techniques that might be used to transform a manufacturing plant into a plant 4.0. The workshop was organized
- [Presentation given at the ANSYS Innovation User Conference 2019 is now available to download](https://www.rbf-morph.com/presentation-given-at-the-ansys-innovation-user-conference-2019-is-now-available-to-download/) - RBF Morph took part in the ANSYS Innovation User Conference and Workshop 2019 which was held on May, 22th and 23th in Coventry (UK). Our work titled “High Performance RBF Mesh Morphing Solutions to Face Typical Aerospace Problems” presents an overview on the feature of RBF Morph and provides a set of examples of application
- [Privacy Policy](https://www.rbf-morph.com/privacy-policy/) - RBF Morph's Privacy Policy PRIVACY POLICYLast updated July 08, 2024This privacy notice for RBF Morph ("we," "us," or "our"), describes how and why we might collect, store, use, and/or share ("process") your information when you use our services ("Services"), such as when you:Visit our website at https://www.rbf-morph.com/, or any website of ours that links to
- [CAEUp – Update of CAE models on actual manufactured shapes](https://www.rbf-morph.com/caeup-update-of-cae-models-on-actual-manufactured-shapes/) - CAEUp aims at implementing a cloud-based software tool whose core is the comparison of the structural performances between the CAE model relative to the nominal design of a certain product and the digital twin of the real product as built.The digital twin is updated on HPC cloud infrastructure and the performance prediction recomputed adopting a variation
- [Theses and Dissertations](https://www.rbf-morph.com/theses-and-dissertations/) - 2024 Theses and dissertations 2024 Click to Browse 2023 Theses and dissertations 2023 Click to Browse 2022 Theses and dissertations 2022 Click to Browse 2021 Theses and dissertations 2021 Click to Browse 2019 Theses and dissertations 2019 Click to Browse 2018 Theses and dissertations 2018 Click to Browse 2017 Theses and dissertations 2017 Click to
- [Services](https://www.rbf-morph.com/services2/) - Consulting Services The RBF Morph team supports the use of its products while also providing custom releases and additional plug-ins tailored to client requirements for even unique applications. Development A combination of technology, tenacity, courage and imagination define our vision in turning CAE-based procedures into competitive advantage. Book a personal demo, act now! Contact us
- [Research and Development](https://www.rbf-morph.com/research-and-development/) - A combination of technology, tenacity, courage and imagination define our vision in turning CAE-based procedures into competitive advantage, being aware that each customer is a unique opportunity and challenge. We have, recently participated in several co-funded collaborative research projects including RBF4AERO and Fortissimo (FP7 EC Project), RIBES (Clean Sky 1) and supported industrial and research joint initiatives
- [Service](https://www.rbf-morph.com/services/) - Consulting Services and Customizations Development Do you have an idea? Contact Us Send An Email
- [Workshop HPC Industry 4.0@Cineca](https://www.rbf-morph.com/workshop-hpc-industry-4-0cineca/) - RBF Morph took part in the Workshop HPC for Industry 4.0@Cineca that was held in Doria Gran Hotel Milan (MI) 21-23 May, 2019.The aim of the workshop was to present state-of-the-art Industry 4.0 technologies. In particular, here were presented methods and techniques that might be used to transform a manufacturing plant into a plant 4.0.The workshop was organized around five
- [ANSYS Innovation User Conference 2019](https://www.rbf-morph.com/ansys-innovation-user-conference-2019/) - RBF Morph took part in the ANSYS Innovation User Conference and Workshop 2019 which was held on May, 22th and 23th in Coventry (UK).Our work titled “High Performance RBF Mesh Morphing Solutions to Face Typical Aerospace Problems” presents an overview on the feature of RBF Morph and provides a set of examples of application examples
- [Support Maintenance and Customizations](https://www.rbf-morph.com/support-maintenance-and-customizations/) - Thanks to its reliable and long standing experience as a consolidated team, RBF Morph offers outstanding technical expertise in support its mesh morphing-based solutions, so delivery of comprehensive support, as well as consistent solutions personalized to customers’ specific requirements, are guaranteed.RBF Morph develops and sells several commercial software products running according to the RBF mesh-morphing approach, through our specialized technical team, we
- [Consulting Services](https://www.rbf-morph.com/consulting-services/) - Enjoying the synergy of knowledge and experience coming equally from both the industrial and scientific sector the RBF Morph team is able to conceive and design high-efficiency simulation procedures based on mesh morphing and adapt them in accordance to customers’ product development processes to release reliable and consistent solutions.We believe that our knowledge is our
- [Optimization of a ship hull](https://www.rbf-morph.com/optimization-of-a-ship-hull/) - Resistance is one of the important areas that has to be taken into account in ship hull development.An interesting possibility is to combine a CFD method and a mathematical optimization method together with a program for hull form variation. This system can then be used to find a hull form that is optimized with respect
- [Use of RBF Morph mesh morphing for the estimation of airfoil performances in presence of ice profiles](https://www.rbf-morph.com/use-of-rbf-morph-mesh-morphing-for-the-estimation-of-airfoil-performances-in-presence-of-ice-profiles/) - Flying in icing atmospheric conditions can be a serious safety problem. Ice build-up generally occurs when supercooled droplets impinge on aircraft surfaces, most commonly the engine and the windward face of the wings, causing a variation in the overall vehicle fluid dynamics.Ice accretions can increase the drag force and decrease the lifting characteristics of the
- [A virtual test bench for hemodynamic evaluation of aortic cannulation in cardiopulmonary bypass](https://www.rbf-morph.com/a-virtual-test-bench-for-hemodynamic-evaluation-of-aortic-cannulation-in-cardiopulmonary-bypass/) - Cardiopulmonary bypass (CPB) is a common practice in cardiac surgery. In this technique, venous blood is directed from the venous system to a heart-lung machine and then returned to the aorta through an inserted arterial cannula. Among the perioperative and postoperative complications, a reduction of cerebral perfusion, resulting in neurological complications, is observed, linked to
- [RBF – MORPH FSI Activity: motorsport application Indy Car](https://www.rbf-morph.com/rbf-morph-fsi-activity-motorsport-application-indy-car/) - RBF Morph can speed up your design with several examples of internal and external flow. A specific example of usage of RBF Morph in motor sport will be given by Dallara with examples on the Indy Car IR5.In this study, we have parameterized a CFD model for complex shape change directly from the RBF-Morph solution, to pair
- [A CFD-based wing sail optimisation method coupled to a VPP](https://www.rbf-morph.com/a-cfd-based-wing-sail-optimisation-method-coupled-to-a-vpp/) - An aerodynamic optimisation procedure for an AC72 wing sail was developed. It includes a RANS solver and a VPP.The boat performance is maximised identifying the optimum values of a set of parameters defying the wing trim. In particular, a four degrees of freedom equilibrium equation system is solved for a prescribed wing geometry, providing the
- [RBF-based aerodynamic optimization of an industrial glider](https://www.rbf-morph.com/rbf-based-aerodynamic-optimization-of-an-industrial-glider/) - The present study is addressed to the improvement of the aerodynamic design of an industrial glider flying at Mach 0.08.Taurus glider, designed and manufactured by Pipistrel d.o.o. Ajdovščina Slovenia is a side-by-side two-seat self-launching ultra-light glider made out of composite materials. The wing is located in a vertical central position respect to the fuselage, whilst
- [An Accurate, Extensive, and Rapid Method for Aerodynamics Optimization: The 50:50:50 Method](https://www.rbf-morph.com/an-accurate-extensive-and-rapid-method-for-aerodynamics-optimization-the-505050-method/) - Aerodynamics development is all about trade-offs, striking the right balance between styling needs and aerodynamic concerns. Nearly all major automotive and truck manufacturers use computational fluid dynamics (CFD) during the development process to evaluate aerodynamic drag of proposed vehicle designs. Typically, R&D teams analyze about 50 to 500 different vehicle shape variants in the time available
- [Sails trim optimisation using cfd and rbf mesh morphing](https://www.rbf-morph.com/sails-trim-optimisation-using-cfd-and-rbf-mesh-morphing/) - This study has been conducted within a research partnership, between University of Rome Tor Vergata and Newcastle University.The study is focused on the use of mesh morphing to explore different trims of yachts sails. In particular, four trims of the fore and aft sail of a model-scale sailing yacht were modelled leading to 16 configurations
- [Shape optimization of the MIRA Reference CAR](https://www.rbf-morph.com/shape-optimization-of-the-mira-reference-car/) - Automobile industry is facing the great challenge of energy conservation and emission reduction. It’s necessary to do some researches on some surface components of a car body to find out which of them may affect aerodynamic drag remarkably. This will help an aerodynamic engineer modify an initial car model more clearly. We also hope to
- [Industrial Application of the Meshless Morpher RBF Morph to a Motorbike Windshield Optimisation](https://www.rbf-morph.com/industrial-application-of-the-meshless-morpher-rbf-morph-to-a-motorbike-windshield-optimisation/) - Variotouring windshield introduced in 2002 by the German company MRA to control the shape of the flux that acts on the driver. The aim of the variotouring is to control the fluxes path to limit the annoyance thanks to a special shape of the screen and an adjustable deflector. The system acts as a flux
- [Structural optimization of an automotive wheel rim through an RBF mesh morphing technique](https://www.rbf-morph.com/structural-optimization-of-an-automotive-wheel-rim-through-an-rbf-mesh-morphing-technique/) - Structural optimization is a method commonly employed by designers to realize better products as soon as possible. In the present work the aim is to arrange the material distribution of a structure in order to get the minimum weight and to prevent the risk of mechanical failure during its functioning. There are several ways to
- [Aircraft design optimization by means of Radial Basis Functions mesh morphing](https://www.rbf-morph.com/aircraft-design-optimization-by-means-of-radial-basis-functions-mesh-morphing/) - This study has been conducted within a Research partnership, active since 2009, between Piaggio Aero Industries and University of Rome Tor Vergata. The collaboration was addressed to the solution of the aeroelastic problem, using the RBF Morph mesh morphing software, and recently extended to shape optimization methods.A wind tunnel model of a business class aircraft in
- [Mandible morphing through principal components analysis](https://www.rbf-morph.com/mandible-morphing-through-principal-components-analysis/) - A study conducted by University of Perugia in collaboration with University of Catania and Politecnico di Torino having title Mandible morphing through principal components analysis is focused on the creation of a parametric model of the mandibular bone, with the final aim of setting up a valid tool for the creation of patient-specific morphologies, as an alternative
- [Project](https://www.rbf-morph.com/project/) - Marketing Product Design Technology Web Development Security Product Design Development Platform Integration Technology Tech Solution Idea Platform Integration
- [Project 02](https://www.rbf-morph.com/project-02/) - Idea Product Design Technology Web Development Development Product Design Security Platform Integration Technology Tech Solution Marketing Platform Integration
- [Pricing](https://www.rbf-morph.com/pricing/) - Our pricing plans Choose Your Optimal Pricing Plans 7 July News PANDORA Completed: Transforming Vascular Surgery Through Read More 25 June Presentations and Proceedings Symposium on Modelling and Engineering Simulation Read More 23 June Theses and Dissertations Interactive Aerodynamic Design Based on Physics-Informed Read More Tecz Always Ready For Solve Your Problem Discover More
- [Blog Grid](https://www.rbf-morph.com/blog-grid/) - July 7, 2026 _ News PANDORA Completed: Transforming Vascular Surgery Through Read More June 25, 2026 _ Presentations and Proceedings Symposium on Modelling and Engineering Simulation Read More June 23, 2026 _ Theses and Dissertations Interactive Aerodynamic Design Based on Physics-Informed Read More June 23, 2026 _ News Towards Real-Time Aerodynamic Optimization Through Physics-Informed Read
- [Project Details](https://www.rbf-morph.com/project-details/) - Branding Process Clients:Liza Olivarez Catagory: Idea, Technology Service:IT consulting, Buisness Web: www.tecz.demo Lorem ipsum is simply free text used by copytyping refreshing. Neque porro est qui dolorem ipsum quia quaed inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo. Aelltes port lacus quis enim var sed efficitur turpis gilla sed sit amet finibus eros.
- [Team](https://www.rbf-morph.com/team/) - Meet With Our Specialist Team that Builds Ideas Driven by the Future Solution Planning Optimization Send Your Message Solve Your Problem Discover More
- [Team Details](https://www.rbf-morph.com/team-details/) - Send Your Review
- [Home 02](https://www.rbf-morph.com/home-02/) - TECZ IT & CREATIVE SOLUTION Web designing in a powerful way of just not an only professions, however, in a passion. Discover More +2700231798 78 teczhelp@gmail.com Best IT Service System is a term used to refer to an organized collection symbols and processes that may be used to operate on such symbols. Perspiciatis omnis natus
- [Home 03](https://www.rbf-morph.com/home-03/) - Solutions for your businesses Innovating Tech Solution Discover More Tech Solution Discover More Tech Solution Discover More Networking Business Consultation Website Development UI/UX Design Services Support Management IT Technology services built specifically for your business. Find your solution IT Problems Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed eiustempor incididunt ut labore et dolore
- [Home 05](https://www.rbf-morph.com/home-05/) - BEST IT SOLUTION FOR YOU Technology Solutions for Future Discover More Watch Our Showcase am adipi we daily ipsum Perspiciatis omnis natus error Donec gravida imperdie Discover More Tech Projects Pricing Plans Best IT Services Consultancy A consulting firm or consultancy is a professional service firm provides expertise Development A consulting firm or consultancy is
- [Home 04](https://www.rbf-morph.com/home-04/) - Invanting Solution For Your Buisness Discover More for Startup We believe that success is achieved through a highly collaborative interaction, so that we can work. Keep in touch with Tecz for brands, services and high solution Our Services majority have suffered alteration Technical Support There are many variations of available but the majority have suffered
- [Shop](https://www.rbf-morph.com/shop/)
- [Cart](https://www.rbf-morph.com/cart/) - [woocommerce_cart]
- [Checkout](https://www.rbf-morph.com/checkout/) - [woocommerce_checkout]
- [My account](https://www.rbf-morph.com/my-account/) - [woocommerce_my_account]
- [Pagina di esempio](https://www.rbf-morph.com/pagina-di-esempio/) - Questa è una pagina di esempio. Differisce da un articolo di un blog perché rimane sempre allo stesso posto e (in molti temi) appare nel menu di navigazione. Molte persone iniziano con una pagina di Informazioni che li presentano ai visitatori del sito. Potrebbe apparire una presentazione del tipo: Ciao! Sono un fattorino ciclista di
- [Shop](https://www.rbf-morph.com/shop-2/)
- [Cart](https://www.rbf-morph.com/cart-2/) - [woocommerce_cart]
- [Checkout](https://www.rbf-morph.com/checkout-2/) - [woocommerce_checkout]
- [My account](https://www.rbf-morph.com/my-account-2/) - [woocommerce_my_account]
- [Faq](https://www.rbf-morph.com/faq/) - Ask a Question Send Question IT Solution General Inquiris Theme Features Account Setting Our Information Questions & Answer I'm a total beginner. Can I still follow along? Your applicant may have limited help desk wexperience. In that case, look for applicants who are motivated to grow and have some transferable Which technical skills would you

## My Templates

- [Elementor Loop Item #2673](https://www.rbf-morph.com/?elementor_library=elementor-loop-item-4)
- [Elementor Loop Item #2666](https://www.rbf-morph.com/?elementor_library=elementor-loop-item-3)
- [Elementor Loop Item #2576](https://www.rbf-morph.com/?elementor_library=elementor-loop-item-2)
- [Elementor Loop Item #2569](https://www.rbf-morph.com/?elementor_library=elementor-loop-item)
- [Default Kit](https://www.rbf-morph.com/?elementor_library=default-kit)
- [Default Kit](https://www.rbf-morph.com/?elementor_library=default-kit-2)

## Services

- [ROMed2VR](https://www.rbf-morph.com/services/romed2vr/) - ROMed2VRROMed2VR – Virtual Reality Empowed by Computational Fluid Dynamics Reduced-Order Models to Support Pre-Surgery Medical Planning – is a pioneering initiative focused on advancing pre-surgical planning for congenital heart defects by combining the power of Computational Fluid Dynamics (CFD) and Virtual Reality (VR). By developing a fast, reliable computational workflow based on open-source CFD and
- [SafeBot4Twin](https://www.rbf-morph.com/services/safebot4twin/) - SafeBot4TwinSafeBot4Twin – A Large Language Model-based Cyber-secure chatbot to control Medical Digital Twins – is an innovative project that combines cybersecurity and artificial intelligence to enable safe, user-friendly interaction with Medical Digital Twins (MDTs). Developed by RBF Morph and LivGemini within the Cyber 4.0 ecosystem, the project addresses the dual challenge of protecting sensitive patient
- [LESSICE](https://www.rbf-morph.com/services/lessice/) - LESSICEThe LESSICE project (Multiscale LES Simulation for In-Flight ICE Accretion Simulation) represents a significant advancement in the computational modeling of ice formation on aircraft surfaces. Led by a consortium that includes the Centro Italiano Ricerche Aerospaziali (CIRA), HIT09, and RBF Morph, the project is part of the Spoke 6 initiative within the Sapienza CN1 research
- [DigiPAD](https://www.rbf-morph.com/services/digipad/) - DigiPADThe EU-funded DigiPAD project (Digital Twin for Advanced Design in the Aerospace Industry) represents a transformative effort to enhance the precision and efficiency of preliminary aircraft design. Launched in May 2024, the 15-month initiative was a collaboration between RBF Morph and SmartUp Engineering, two organizations renowned for their expertise in numerical simulation and optimization tools. By
- [PANDORA](https://www.rbf-morph.com/services/pandora/) - PANDORAPANDORA (Pre-operative Assistant Based on Data-Driven Approaches for Vascular Grafts Surgery) is a business experiment financed by the European project Fortissimo Plus charting a new course for cardiovascular surgery through patient‑specific digital twins of the aorta.Fusing AI‑driven image analysis with high‑fidelity, in‑silico simulations, the project enables surgeons to try different grafts and operative strategies in a virtual
- [DiTAiD](https://www.rbf-morph.com/services/ditaid/) - DiTAiDDiTAiD (Digital Twin for Airflow and Drug Delivery in Human Airways) was an experiment. CFD can be used to assess airflow and improve the efficiency of inhaled drug delivery in human lungs. However, presently this requires patient-specific simulations which can be both costly and time-consuming.The objective of the experiment “Digital Twin for Airflow and Drug
- [COPERNICUS Project](https://www.rbf-morph.com/services/copernicus-project/) - CopernicusThe Copernicus project (Cloud-Based HPC Platform to Support Systemic-Pulmonary Shunting Procedures) targeted congenital heart diseases (CHDs).Congenital heart diseases account for nearly one-third of all congenital birth defects. Without the ability to alter the prevalence of CHDs, interventions and resources must be focused to improve survival and quality of life. The Modified Blalock Taussig Shunt (mBTS)
- [MeDiTATe Project](https://www.rbf-morph.com/services/meditate-project/) - MeDiTATe ProjectMeDiTATe (The medical digital twin for aneurysm prevention and treatment) aimed to develop state-of-the-art image based medical Digital Twins of cardiovascular districts for a patient-specific prevention and treatment of aneurysms.The Individual Research Projects of the 14 ESRs are defined across five research tracks:(1) High fidelity CAE multi-physics simulation with RBF mesh morphing (FEM, CFD, FSI,
- [Fortissimo 2 Project](https://www.rbf-morph.com/services/fortissimo-2-project/) - Fortissimo 2Fortissimo 2 (Cross-Solver Cloud-Based Tool for Aeronautical FSI Applications) was a successor of Fortissimo project and it continued to address the adoption of next generation ICT advances in the manufacturing domain. At the core of Fortissimo 2 were three tranches of Application Experiments (~35 in total).A key feature of Fortissimo 2 was the adoption
- [Spinner Project](https://www.rbf-morph.com/services/spinner-project/) - Spinner The Spinner Project (Next Generation Spine Experts) was a doctoral training programme aimed at Bioengineering early stage researchers, to train bioengineers to be in a position to design the next generation of repair materials and techniques for spine surgery. Spinner brought together partners from the biomaterials (Finceramica), implantable devices (Aesculap), and computational modelling (Ansys, Adagos) industries with
- [RBF2CAD Project](https://www.rbf-morph.com/services/rbf2cad-project/) - RBF2CAD The mesh-morphing technology that is used in computer-aided design (for changing the shape of a meshed surface while preserving the topology) is advancing. It is used today in many applications, from special effects on film sets to scientific visualisations.Technical designers working with computer-aided design today need optimisation for each one of their models with computer-aided
- [RIBES EU Project](https://www.rbf-morph.com/services/ribes-eu-project/) - RIBES A common strategy to model the Fluid Structure Interaction (FSI) mechanisms is to couple the fluid dynamic solution, obtained by CFD tools, with structural solvers in an iterative process.The European “RIBES” research project, funded within the 7th framework programme (aeronautics and air transport), was focused on the improvement of the accuracy of CFD-CSM based aeroelastic
- [Fortissimo EU Project](https://www.rbf-morph.com/services/fortissimo-eu-project/) - FortissimoFortissimo (Cloud-Based Additive Manufacturing) was a collaborative project that enables European SMEs to be more competitive globally through the use of simulation services running on a High Performance Computing cloud infrastructure.The project was coordinated by the University of Edinburgh and involved 45 partners including Manufacturing Companies, Application Developers, Domain Experts, IT Solution Providers and HPC
- [Cloudi Facturing Project](https://www.rbf-morph.com/services/cloudi-facturing-project/) - CloudiFacturing CloudiFacturing – Cloudification of Production Engineering for Predictive Digital Manufacturing – was funded in October 2017 and is a European innovation action undertaken in conjunction with the “Factories of the Future (FoF) Initiative”.The mission of CloudiFacturing was to optimize production processes and producibility using Cloud/HPC-based modeling and simulation, leveraging online factory data and advanced data

## Categories

- [Senza categoria](https://www.rbf-morph.com/category/senza-categoria/)
- [News](https://www.rbf-morph.com/category/news/)
- [Press](https://www.rbf-morph.com/category/press/)
- [Theses and Dissertations](https://www.rbf-morph.com/category/theses-and-dissertations/)
- [Scientific Papers](https://www.rbf-morph.com/category/scientific-papers/)
- [Presentations and Proceedings](https://www.rbf-morph.com/category/presentations-and-proceedings/)

## Service Categories

- [projects](https://www.rbf-morph.com/services-cat/projects/)